14871487
COOPER LIGHTING
FAIL-SAFE®
CLEANROOM
DIMENSIONS
• Lens is clear extruded
with prisms positioned
inside fixture and smooth
surface on the outside for
easy cleaning
• Flush mounted, stainless
steel machine screws
• Nominal 5” deep
recessed one-piece 20 ga.
CRS housing
• Unique, Particulock™
lens retention system.
Lens is hermetically
sealed to door frame
• Optional extruded
aluminum, mitered, fully
gasketed, outside flanged
door; or one-piece, die-
formed stainless steel
door and housing trim
flange
• Standard Class P,
CBM/ETL ballast
• MicroSealTM gasketing
system features silicone
RTV sealant sealing lens
to door frame and
extruded silicone rubber
gasketing seals door to
housing and housing to
ceiling
• Gasketed access plate
with two flattened, 7/8"
diameter knockouts
• Lamps by others
DESCRIPTION
The Fail-Safe SCF Series is
designed for use in horizontal
or non-laminar air flow clean
rooms and features the added
convenience of field retrofitting
for flange or grid
installations.The enclosed and
gasketed housing and outside
flanged door protect against
infiltration of airborne bacteria.
Fixture tested to 100 PSI hose
down. Higher ratings available
(consult factory). The mitered
edges on the door frame and
the hole-free design of the
housing prevent air exchange
between the fixture and
plenum, allowing re-lamping
without contamination of the
clean areas. UL Listed Wet
Location. These luminaires are
manufactured in accordance
with U.S.D.A., F.D.A., N.S.F. and
Federal Standard 209E. The
SCF Series is suitable for use in
I.E.S. Class 10 (M2.5), 100 (M
3.5) 1,000 (M 4.5), 10,000 (M
5.5) and 100,000 (M 6.5) clean
room environments.
SCF
17W-160W
Fluorescent
1' x 2', 1' x 4', 2' x 2', 2' x 4'
SPECIFICATION GRADE
FLUORESCENT FLANGE
OUTSIDE FLANGED DOOR
1487
C
D
AB C D
SCF/12 3 7/16" 11 11/16" 12 1/4" 24 1/2"
1' x 2' (87mm) (297mm) (311mm) (622mm)
SCF/12 3 7/16" 11 11/16" 12 1/4" 48 1/2"
1' x 4' (87mm) (297mm) (311mm) (1232mm)
SCF/24 3 11/16" 25 1/2" 24 1/4" 24 1/2"
2' x 2' (94mm) (648mm) (616mm) (622mm)
SCF/24 3 11/16" 25 1/2" 24 1/4" 48 1/2"
2' x 4' (94mm) (648mm) (616mm) (1232mm)
Extruded aluminum mitered
door frame and housing trim
flange with extruded silicone
rubber perimeter gasketing
One piece stainless steel
door frame and housing
trim flange with extruded
closed cell silicone
perimeter gasketing
ORDERING INFORMATION
SAMPLE NUMBER: SCF-12-340-277-IK12-LE3-ALP-GLR
Voltage
120=120V
277=277V
347=347V
UNV=120V
through
277V
Lens Type
IK12=K-12 Prismatic
Acrylic
IP12=K-12 Prismatic
Polycarbonate
KSH251=Bat Wing
Distribution
93=Prismatic
Tempered Glass
Ballast
LE3=Energy
Saving
Ballast
Electronic
Ballast2
EB81=(1) Ballast
for use
with T8
Lamp
EB82=(2) Ballasts
for use
with T8
Lamp
EB21=(1) Ballast
for use
with T12
Lamp
EB22=(2) Ballasts
for use
with
T12Lamp
EBX1=(1) Ballast
for use
with
Biaxial
Lamp
EBX2=(2) Ballasts
for use
with
Biaxial
Lamp
Options
EBP=Emergency
Battery Pack
GLR=Fuse and
Holder
RIF=Radio
Frequency
Interference
Filter
Housing Options
SHN=Stainless
Steel, Brushed
304 Finish
SHP=Stainless Steel,
Polyester
Powder Finish
ALH=Aluminum,
Polyester
Powder Finish
Series
SCF=Specification
Grade
Cleanroom
Flange Type
Width
12=12"
24=24"
Lamp Type
2' Fixture Length
T8 Fluorescents
117=(1) 17W Lamp
217=(2) 17W Lamps
317=(3) 17W Lamps
417=(4) 17W Lamps
T12 Fluorescents
120=(1) 20W Lamp
220=(2) 20W Lamps
320=(3) 20W Lamps
420=(4) 20W Lamps
U Lamps
2U 1 5/8=(2)31W T8 Lamps
3U 1 5/8=(3) 31WT8 Lamps
2U6T8=(2) 32WT8 Lamps
2U6=(2)40WT12Lamps
Biaxial Fluorescents
140BX=(1) 40W Lamp
240BX=(2) 40W Lamps
340BX=(3) 40W Lamps
4' Fixture Length
T8 Fluorescents
132=(1) 32W Lamp
232=(2) 32W Lamps
332=(3) 32W Lamps
432=(4) 32W Lamps
T12 Fluorescents
140=(1) 40W Lamp
240=(2) 40W Lamps
340=(3) 40W Lamps
440=(4) 40W Lamps
Accessories
(Order Separately)
MFCF12-4FT=Mounting
Frame
(not required
for installation)
MFCF24-4FT=Mounting
Frame (not
required for
installation)
Notes: For additional options, consult your Cooper Lighting Representative. Specifications and Dimensions subject to change
without notice.
1The KSH25 provides improved visual performance and wide angle distribution. This lens has an integral prism pattern designed so that
prisms face the lamp cavity and still supply superior photometrics. Highly recommended for all high tech manufacturing environments. 2
For specific electronic ballast, specify brand and catalog number.
Door/Finish
Options
ALP=Aluminum
Door & Trim/
Polyester
Powder Finish
ALX=Extruded
Aluminum
Door &
Trim/Clear
Anodized
Finish
ALXP=Extruded
Aluminum
Door & Trim/
Polyester
Powder Coat
Finish
(Standard)
