Cooper Lighting Metalux Indoor Lighting Accessories User manual

T-Bar Safety Clips EQ-Clip-U (U.L. Listed E61165)
(U.L. Listed 912Y) U.L. approved safety clips used to secure recessed
troffers to T-bar. EQ clips used on fixture sides and
T3A End EQ Bracket Parts Bag EQ end brackets for use on fixture ends.
(Includes (4) Screws and (4) Brackets Use four per fixture
Suspension Sets
Stem Sets SCF-XX-B Fixed Stem Set
SCS-XX-B Swivel Stem Set
(Deep canopy, 3/8" stem, 5/8"
outside diameter)
XX= Length 6, 8, 12, 24, 36, 48, 60, 72
SCA-48-B Adjustable Stem Set (1/4" IPS Stem, 1/2" O.D.)
Used with all surface fixtures as stem sets. SCS stems have 45° swivel, one direction. One set consists of
one stem assembly. Minimum of two sets required per fixture. NOTE: Coupler, 3/8" IPS Pipe Coupler to
join lengths. Coupler is standard baked white enamel or special order of black.
Cable Sets CCA-XX-PFC-U CCA=Adjustable Cable (XX=48" or 120")
CCA-XX-PFS-U CCF=Fixed Cable (XX=12", 15", 18", 21", 24" or 27")
CCA-XX-NPF-U PFC=Power Feed, coil power cord
CCF-XX-PFC PFS=Power Feed, straight power cord
CCF-XX-PFS NPF=Non Power Feed
CCF-XX-NPF
Plaster Frames 95-PF-14 (1x4)
95-PF-22 (2x2)
95-PF-24 (2x4)
95-PF-44 (4x4)
Side Filler Panel SFP-4FT-B Heavy gauge side filler panels for 20" x 48" fixture
for use in a 2' x 4' ceiling installation. (Baked white
finish/2 per set)
Spacer A-1-B/Spacer-U Spaces fixture 1 1/2" to 2 1/2" from ceiling
End Fillers 12-EFS-B (1x2, 1x4) 6" Heavy gauge end fillers use 2 per fixture. End
20-EFS-B (20x48, 20x24) fillers lay on T-bars and are held in place by fixtures
24-EFS-B (2x2, 2x4) but are not attached
End Support Brackets ESS-B Heavy gauge end support brackets. Four per
fixture are required when fixtures are supported
from ends. Must be used with fixture that has a
modified end plate (MEP).
CR Wall Mounting Kit CR-WALLKIT Kit including clips to install the CR Surface Corridor
fixture for wall mount applications.
ACCESSORIES
470 COOPER LIGHTING
PARABOLIC, RECESSED AND SURFACE ACCESSORIES (ORDER SEPARATELY)
SCF SCS SCA
CCA CCA CCA
PFC PFS NPF
Heavy Gauge Metal Construction. Used with
Flanged Recessed Fixtures. (Intended to serve as
a plaster stop only, not to fit into an opening).
Items listed are the major accessories available on Metalux Recessed (Parabolic and Recessed) and Surface Fixtures. Additional options and accessories are available.
Consult Pre-Sales Technical Support for additional information.
COOPER LIGHTING - METALUX®
ACCESSORY DESIGNATION DESCRIPTION