Cooper Lighting Lumark SS Econoliter User manual

COOPER LIGHTING - LUMARK®
INDUSTRIAL
513
COOPER LIGHTING
DIMENSIONS
• Easy slide-on die-cast
aluminum mounting box
with tapped opening for
3/4" conduit
• Heavy-duty, formed steel
housing with an open air
ballast for cooler
operation is finished in a
standard white polyester
powder paint
• High power factor ballast
with class H insulation.
Minimum starting
temperature is -40°C
(-40°F) for HPS and
-30°C (-20°F) for MH, MP
and ML. U.L. listed and
CSA certified
• Mogul-base porcelain
socket
• Computer designed,
faceted SA18 reflector and
anodized baffles provide
maximum photometric
performance and beam
efficiency
• Universal ladder brackets
allow for the flexibility to
change out with other
reflectors available in
acrylic or glass
• Approximate net weight:
30 lbs. (14 kgs.)
DESCRIPTION
The Econoliter utilizes the
SA18 reflector system.
Anodized reflector baffles
combine with the SA18
reflector to kick light into the
desired distribution for narrow
aisle environments. U.L. listed
and labeled for damp location.
CSA Certified.
Econoliter provides optimum
visual conditions in
warehouses by redirecting
light to achieve high vertical
lighting levels on stacks and
maximum horizontal
footcandles in the aisles.
SS
ECONOLITER
175W-400W
High Pressure Sodium
Pulse Start Metal Halide
Metal Halide
AISLE LIGHT INDUSTRIAL
HIGH-BAY LUMINAIRE
18" [457mm]
250W HPS & MH
400W HPS
24" [610mm]
400W MH
26 1/8" [664mm]
NOTES: 1 Not available in 175, 200, 320, and 350W. 2Approved lamp containment barrier required when enclosed rated MP/ML/MH lamps are used. 2005 NEC code
requires that open luminaires must utilize a safety glass bottom (SGB) accessory or an Open rated socket (OR) and lamp. 3200, 250, 320, 350, and 400W only.
4277V only, not available with HSW, HC or HL option. 5Factory set for concentrated, medium or wide distributions only if P (factory pre-set) is in the
nomenclature of the fixture. 6Products also available in non-US voltages and 50Hz for international markets. Various ballast configurations available.
7Multi-tap ballast 120/208/240/277V wired 277V. 8Triple-tap ballast 120/277/347V wired 347V. 95-tap ballast 120/208/240/277/480V wired 480V. 10 Add as suffix
in the order shown. 11 Specifications and dimensions subject to change without notice.
ORDERING INFORMATION
SAMPLE NUMBER: HPSS-EL18-M-400-MT-Q
Lamp Type
HP=High
Pressure
Sodium 1
MH=Metal Halide 2
MP=Pulse Start MH (CWA) 2, 3
ML=Pulse Start MH (Linear Reactor) 2, 3, 4
Series
SS=Steeler
Reflector Type
EL=Econoliter
Reflector
Diameter
18=18"
Socket Position/
Distribution 5
C=Concentrated
M=Medium
W=Wide
Lamp
Wattage
175=175W
200=200W
250=250W
320=320W
350=350W
400=400W
Voltage 6
120V
208V
240V
277V
347V
480V
MT=Multi-Tap 7
TT=Triple-Tap 8
5T=5-Tap 9
Options &
Accessories 10
(See Pages 541-545)
Reflector Lamp
Type Wattage
90°C
65°C
Supply
Wire (Min.)
Ambient
Environment
EL18 175-400W