Cooper Lighting MEM17MWW2SXSNBK User manual

10 STREETWORKS Outdoor Lighting Solutions Cooper Lighting
NOTE: 1 Arms not included. Order Separately. See accessories. 2All HID lamps are medium-base. 3 Electrodeless Fluorescent QL lamp only. Available in vertically lamped optical systems only. 120V only. 4Refer to technical section
for lamp/ballast/voltage compatibility. 5Maximum wattage of 100W HID. 6Vertical Lamp Only. 7SLE only available with Solid Mid selection or with NG option. 8Custom and RAL color matching available upon request.
Consult you Cooper Lighting Representative for more information. 9Quartz options not available on SL optic or vertical lamped optical systems. 10 House side shields available on horizontally lamped 2S, 3S, and 4S optical
systems only. 11 NG option retains daytime appeal of window, louvered, slot, solid rings, or luminous rings mid section styles, but does not allow light into the upper chamber of the housing. Mid section will not glow at
night, maintaining the cutoff control associated with the standard solid mid section. 12 Requires use of 4" O.D. round straight pole. 13 Traditional Arm Only. 14 Not compatible with finials.
TOP
Cast aluminum housing maintains
sidewall thickness and attaches to
mounting arm hub with four (4)
stainless steel fasteners.
MIDSECTION
Milky white acrylic lens utilizes
continuous silicone gaskets to seal
lens to top casting and shade.
Optional colored luminous rings are
available.
SHADES
Heavy gauge precision spun
aluminum shades offer superior
surface finish and consistency in
form.
DOORFRAME ASSEMBLY
Die-cast aluminum 1/8" thick door
and doorframe seal to underside of
shade with a thick wall continuous
silicone gasket.
OPTICAL SYSTEMS
Choice of five (5) high efficiency
segmented optical systems
constructed of premium 95%
reflective anodized aluminum sheet.
ELECTRICAL TRAY
Ballast and related electrical compo-
nentry are mounted to a reinforced
one piece tray with integral handle.
Quick disconnect wiring plugs allow
easy tray removal during routine
maintenance.
FINISH
Housing finished in a 5 stage pre-
mium TGIC polyester powder coat
paint, 2.5 mil nominal thickness for
superior protection against fade and
wear. Standard colors include black,
bronze, grey, white, dark platinum,
graphite metallic, and hartford
green. RAL and custom color
matches available. Consult your
Streetworks Representative.
ORDERING INFORMATION
SAMPLE NUMBER: MEM17MWW2SXSNBK
BALLAST TYPE 4
C=CWI
H=Reac./HPF
K=10KV CWA
N=Hi. Reac./NPF
P=Hi. Reac./HPF
R=Reac./NPF
W=CWA
I=Induction
DECORATIVE AREA COLLECTION
OPTIONS (add as suffix)
1=Single Fuse
2=Double Fuse
C=Emergency Quartz—Separate Circuit 9
E=Emergency Quartz with Time Delay 9
F=Frosted Flat Glass
H=House Side Shield 10
L=Lamp Included
Q=Quartz Standby 9
R=Frosted Sag Glass
V=Vandal Shield (100W Max.)
W=Wire Guard
S=Sag Glass
M=Mogul-Base Socket
PMT=Post Mount Tenon
PM-PCR=NEMA Type Photocontrol Receptacle
(Post Mount Only)
NG=No Glow Luminous Mid Section 11
ACCESSORIES (order separately/replace XX with color suffix)
MEM Modern Epic Medium Arms
[see page 14-15 for details on arm accessories]
SA6105-XX=MEM Bishop Single Pole Mount Arm
SA6106-XX=MEM Bishop Single Pole Mount Arm
with Cross Rod
SA6107-XX=MEM Bishop Twin Pole Mount Arm
SA6108-XX=MEM Bishop Twin Pole Mount Arm
with Cross Rods
SA6109-XX=MEM Traditional Single Pole Mount Arm
SA6110-XX=MEM Traditional Single Pole Mount Arm
with Rounded Upper Bar
SA6111-XX=MEM Traditional Single Pole Mount Arm with
Rounded Lower Bar 12
SA6112-XX=MEM Traditional Single Pole Mount Arm
with 45° Upper Bar
SA6113-XX=MEM Traditional Single Pole Mount Arm
with 45° Lower Bar 12
SA6114-XX=MEM Traditional Single Pole Mount Arm
with 45° Upper Strap
SA6116-XX=MEM Traditional Twin Pole Mount Arm
SA6117-XX=MEM Traditional Twin Pole Mount Arm
with Rounded Upper Bars
SA6118-XX=MEM Traditional Twin Pole Mount Arm
with Rounded Lower Bars 12
SA6119-XX=MEM Traditional Twin Pole Mount Arm
with 45° Upper Bars
SA6120-XX=MEM Traditional Twin Pole Mount Arm
with 45° Lower Bars 12
SA6121-XX=MEM Traditional Twin Pole Mount Arm
with 45° Upper Straps
SA6122-XX=MEM Tenon Adapter for 2 3/8" O.D.
Horizontal Tenon
CEM Modern Epic Medium Arms
[see page 14-15 for details on arm accessories]
SA6154-XX=CEM Bishop Single Pole Mount Arm
SA6155-XX=CEM Bishop Single Pole Mount Arm
with Cross Rod
SA6156-XX=CEM Bishop Twin Pole Mount Arm
SA6157-XX=CEM Bishop Twin Pole Mount Arm
with Cross Rods
SA6158-XX=CEM Traditional Single Pole Mount Arm
SA6159-XX=CEM Traditional Single Pole Mount Arm
with Rounded Upper Bar
SA6160-XX=CEM Traditional Single Pole Mount Arm
with Rounded Lower Bar 12
SA6161-XX=CEM Traditional Single Pole Mount Arm
with 45° Upper Bar
SA6162-XX=CEM Traditional Single Pole Mount Arm
with 45° Lower Bar 12
SA6163-XX=CEM Traditional Single Pole Mount Arm
with 45° Upper Strap
SA6165-XX=CEM Traditional Twin Pole Mount Arm
SA6166-XX=CEM Traditional Twin Pole Mount Arm
with Rounded Upper Bars
SA6167-XX=CEM Traditional Twin Pole Mount Arm
with Rounded Lower Bars 12
SA6168-XX=CEM Traditional Twin Pole Mount Arm
with 45° Upper Bars
SA6169-XX=CEM Traditional Twin Pole Mount Arm
with 45° Lower Bars 12
SA6170-XX=CEM Traditional Twin Pole Mount Arm
with 45° Upper Straps
SA6172-XX=CEM Tenon Adapter for 2 3/8" O.D.
Horizontal Tenon
OA/RA1016=NEMA Photocontrol—Multi-Tap
OA/RA1027=NEMA Photocontrol—480V
OA/RA1201=NEMA Photocontrol—Multi-Tap (347V)
ACCESSORY OPTIONS (add as suffix to accessory)
M=Modern Finial 13
A=Architectural Finial 13
N=Nostalgic Finial 13
4=NEMA Twistlock Photocontrol Receptacle 14
PRODUCT
FAMILY 1
MEM=Modern
Epic
Medium
CEM=Classic
Epic
Medium
LAMP TYPE 4
M=Metal
Halide
S=High
Pressure
Sodium
Q=Induction
LAMP
WATTAGE
HID 2
50=50W
70=70W
10=100W
15=150W
17=175W
Electrodeless
Fluorescent 3
55=55W
85=85W
VOLTAGE 4
2=120V
0=208V
4=240V
7=277V
8=480V
9=347V
K=120/277V
wired 120V
L=277/120V
wired 277V
N=Multi-Tap
Wired 277V
W=Multi-Tap
Wired 120V
DISTRIBUTION
MA=Milk White
Acrylic
Jar 5, 6
2S=Type II
3R=Type III
Glass 6
3S=Type III
4S=Type IV
5R=Type V
Glass 6
5S=Type V
SL=Spill Light
Eliminator 7
SHADE TYPE
SN=Straight
Narrow
SW=Straight
Wide
BL=Bell
FL=Flute
MID SECTION
TYPE
X=Solid
(Standard)
1=Window
2=Louvered
3=Slot
4=Solid Rings
5=Luminous
Rings
Optional Mid
Section Type
6=Luminous Rings—Red
7=Luminous Rings—Bright Blue
8=Luminous Rings—Deep Green
9=Luminous Rings—Warm Orange
COLOR
(add as suffix/
must specify) 8
AP=Grey
BK=Black
BZ=Bronze
DP=Dark
Platinum
GM=Graphite
Metallic
GN=Hartford
Green
WH=White
OPTIONS +
ACCESSORIES
(See Below)
MEM/CEM EPIC MEDIUM 50-175W
MH/HPS/QL
DECORATIVE
EPA:
Effective Projective Area:
Flat Lens .94
Sag Lens 1.04
SHIPPING DATA
Approximate Net Weight:
37 lbs. (17 kgs.)
OPTIONS + ACCESSORIES [Must be listed in the order shown and separated by a dash]
STREETWORKS™IP65 RATED
NOTE: In all flat glass and solid mid sections
configurations only.
Maximum Width 24" [609mm]
NOTE: See MEM/CEM configurations on opposite page
for more detailed information.
Maximum
Height
20 3/4"
[526mm]

STREETWORKS Outdoor Lighting Solutions 11Cooper Lighting
MEM/CEM EPIC MEDIUM DECORATIVE
CONFIGURATIONS
OPTIONAL COLORS [Other finish colors available. Consult your Cooper Lighting representative]
GM
Graphite Metallic
WH
White BK
Black BZ
Bronze AP
Grey H
Hartford Green
DP
Dark Platinum
Classical - 8.6"H x 8.7"W
HOUSING MID SECTION SHADE
Window - 3.4"H x 9.9"W
Solid - 3.4"H x 9.9"W
Louvered - 3.4"H x 9.9"W
Slot - 3.4"H x 9.9"W
Solid Rings - 3.4"H x 12"W
Straight Wide - 5.1"H x 23.9"W
Bell - 8"H x 24"W
Flute - 6"H x 22.5"W
Straight Narrow - 6.6"H x 19.1"W
Luminous Rings - 3.4"H x 12"W
Modern - 9.3" H x 8.8" W
FINIALS
Architectural
Modern
Nostalgic
PHOTOMETRICS [Complete IES files available at www.cooperlighting.com]
FOOTCANDLE TABLE
Select mounting height and read across for footcandle
values of each isofootcandle line. Distance in units of
mounting height.
Mounting Footcandle Values for
Height Isofootcandle Lines
ABCDE
MEM17M3SX.IES
10' 8.00 4.00 2.00 0.80 0.40
15' 3.40 1.70 0.85 0.34 0.17
20' 2.00 1.00 0.50 0.20 0.10
MEM17M5SX.IES
10' 8.00 4.00 2.00 0.80 0.40
15' 3.40 1.70 0.85 0.34 0.17
20' 2.00 1.00 0.50 0.20 0.10
MEM17M3SX.IES
175-Watt MH
14,000-Lumen Clear ED-17 Lamp
Segmented Type III
MEM17M5SX.IES
175-Watt MH
14,000-Lumen Clear ED-17 Lamp
Segmented Type V
4
3
2
1
0
1
2
3
4
5 4321012345
ABCDE
4
3
2
1
0
1
2
3
4
54321012345
ABCDE

14 STREETWORKS Outdoor Lighting Solutions Cooper Lighting
ARMS SPECIFICATIONS
DECORATIVE AREA COLLECTION
EPIC COLLECTION ARMS
DECORATIVE
BISHOP SINGLE POLE MOUNT ARM
[SA6105, SA6154, SA6005, SA6054]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 24 lbs. E.P.A: .92
BISHOP SINGLE POLE MOUNT ARM
WITH CROSS ROD
[SA6106, SA6155, SA6006, SA6055]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 25 lbs. E.P.A: .98
BISHOP TWIN POLE MOUNT ARM
[SA6107, SA6156, SA6007, SA6056]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 37 lbs. E.P.A: 1.43
BISHOP TWIN POLE MOUNT
ARM WITH CROSS RODS
[SA6108, SA6157, SA6008, SA6057]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 39 lbs. E.P.A: 1.55
TRADITIONAL SINGLE POLE
MOUNT ARM
[SA6109, SA6158, SA6009, SA6058]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 20 lbs. E.P.A: .86
TRADITIONAL SINGLE POLE MOUNT ARM
WITH ROUNDED UPPER BAR
[SA6110, SA6159, SA6010, SA6059]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 28 lbs. E.P.A: 1.4
TRADITIONAL SINGLE POLE MOUNT ARM
WITH ROUNDED LOWER BAR
[SA6111, SA6160, SA6011, SA6060]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon. Requires use of 4" O.D. Round
Straight Pole
Weight: 25 lbs. E.P.A: 1.16
TRADITIONAL SINGLE POLE MOUNT ARM
WITH 45° UPPER BAR
[SA6112, SA6161, SA6012, SA6061]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 28 lbs. E.P.A: 1.38
TRADITIONAL SINGLE POLE MOUNT ARM
WITH 45° LOWER BAR
[SA6113, SA6162, SA6013, SA6062]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon. Requires use of 4" O.D. Round
Straight Pole
Weight: 25 lbs. E.P.A: 1.14
Radius
12''
[304mm]
54 3/16''
[1376mm]
33 1/2" [852mm]
2''
[51mm]
Radius
12''
[304mm]
54 3/16''
[1376mm]
33 1/2" [852mm]
2''
[51mm]
Radius
12''
[304mm]
62" [1575mm]
54 3/16''
[1376mm]
2''
[51mm]
Radius
12''
[304mm] 54 3/16''
[1376mm]
62" [1575mm]
2''
[51mm] 18 7/8"
[480mm]
30 15/16" [786mm]
26 3/4" [679mm]
35 7/8"
[911mm]
30 15/16" [786mm]
26 3/4" [679mm]
35 7/16"
[900mm]
18 7/8"
[480mm]
30 15/16" [786mm]
26 3/4" [679mm]
35 7/8"
[911mm]
30 15/16" [786mm]
26 3/4" [679mm]
35 7/16"
[900mm]
18 7/8"
[480mm]
30 15/16" [786mm]
26 3/4" [679mm]

STREETWORKS Outdoor Lighting Solutions 15Cooper Lighting
Cooper Lighting
EPIC COLLECTION ARMS DECORATIVE
ARMS SPECIFICATIONS (CON’T.)
TRADITIONAL SINGLE POLE MOUNT ARM
WITH 45° UPPER STRAP
[SA6114, SA6163, SA6014, SA6063]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 24 lbs. E.P.A: 1.17
TRADITIONAL TWIN POLE MOUNT ARM
[SA6116, SA6165, SA6016, SA6065]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 30 lbs. E.P.A: 1.44
TRADITIONAL TWIN POLE MOUNT ARM
WITH ROUNDED UPPER BARS
[SA6117, SA6166, SA6017, SA6066]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 43 lbs. E.P.A: 2.28
TRADITIONAL TWIN POLE MOUNT ARM
WITH ROUNDED LOWER BARS
[SA6118, SA6167, SA6018, SA6067]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon. Requires use of 4" O.D. Round
Straight Pole
Weight: 40 lbs. E.P.A: 2.04
TRADITIONAL TWIN POLE MOUNT ARM
WITH 45° UPPER BARS
[SA6119, SA6168, SA6019, SA6068]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 43 lbs. E.P.A: 2.24
TRADITIONAL TWIN POLE MOUNT ARM
WITH 45° LOWER BARS
[SA6120, SA6169, SA6020, SA6069]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon. Requires use of 4" O.D. Round
Straight Pole
Weight: 40 lbs. E.P.A: 2.0
TRADITIONAL TWIN POLE MOUNT ARM
WITH 45° UPPER STRAPS
[SA6121, SA6170, SA6021, SA6070]
Slipfits over 4" round straight pole, or 4" O.D.
by 6" tall tenon.
Weight: 37 lbs. E.P.A: 1.81
35 7/16 "
[900mm]
57" [1448mm]
53 1/2" [1359mm]
26 3/4" [679mm]
35 7/16"
[900mm]
18 7/8"
[480mm]
57" [1448mm]
53 1/2" [1359mm]
26 3/4" [679mm]
35 7/16"
[900mm]
57" [1448mm]
53 1/2" [1359mm]
26 3/4" [679mm]
TENON ADAPTER
[SA6022, SA6071, SA6122, SA6172]
Attaches to a 2 3/8" O.D. horizontal tenon.
Weight: 4 lbs. E.P.A: .08
35 7/16"
[900mm]
30 15/16" [786mm]
26 3/4" [679mm]
57" [1448mm]
53 1/2" [1359mm]
26 3/4" [679mm]
18 7/8"
[480mm]
35 7/16"
[900mm]
57" [1448mm]
53 1/2" [1359mm]
26 3/4" [679mm]
35 7/16"
[900mm]
18 7/8"
[480mm]
57" [1448mm]
53 1/2" [1359mm]
26 3/4" [679mm]