46 STREETWORKS Outdoor Lighting Solutions Cooper Lighting
DECORATIVE LUMINAIRE
ARC-C CUTOFF AVENUE 50-400W
MH/HPS/QL
DECORATIVE
STREETWORKS™
TOPS + FINIALS
All hard mount tops are made of spun
aluminum. Top provided with toolless
access for ease of maintenance.
Finials are manufactured of cast
aluminum.
REFLECTOR
Highly specular multi-faceted CVL
reflector system provides a Type III or
V Cutoff Distribution. Vertical lamp
position maximizes light output,
ensures a uniform distribution and
minimizes direct glare.
GLOBE
Clear injection molded 9" globe is HID
acrylic or optional polycarbonate.
Polycarbonate not recommended for
MH applications.
DECORATIVE CHIMNEY
Chimney provided with brushed
aluminum finish standard. Optional
copper finished accents available for
chimney and access top.
CAGE ASSEMBLIES
Two (2) uprights are manufactured of
cast aluminum. Banding is spun
aluminum. All cage assemblies are
mounted to the exterior of the housing
via four (4) stainless steel fasteners.
A variety of finishes are available.
ELECTRICAL
Available up to 400W MH and 250W
HPS. Ballast assembly is mounted on
a removable tray with quick
disconnects for ease of installation
and maintenance. Plug in starter
standard when applicable. Terminal
block is hard mounted to the casting
and easily accessible through the
door’s wide entryway. UL listing and
optional induction fluorescent lamp
available.
HOUSING
Heavy duty-cast aluminum housing
and door. Wide handhole provide
toolless entry for access to plug-in
starters and optional NEMA twistlock
PCR. 1" ANSI wattage/source label.
Fixture is 3G vibration rated.
MOUNTING
Post top mount fits 3" OD tenons.
Four (4) stainless steel fasteners
standard.
FINISH
Standard polyester powder coat finish
in black. For more color options see
optional color or consult your
Streetworks represenatitive for
more information.
ORDERING INFORMATION
SAMPLE NUMBER: ARC25MWW5C652
EPA:
Effective Projective Area: 2.1
SHIPPING DATA
Approximate Net Weight:
50 lbs. (23 kgs.)
OPTIONS [Must be ordered in alphanumeric order]
NOTE: 1 85W QL Induction only. 120 or 240V only. 2Metal Halide only. Not available in 480V. 3Refer to technical section for lamp/ballast/voltage compatibility. 4Medium-base lamp standard for 150W and below Metal Halide.
400W Metal Halide requires reduced jacket ED28 lamp. 5Available in 120V only. 6Available 50-150W, 120/240 or single voltage only. 7Avenue Cage must be used with Avenue Top. Avenue Top is available without cage.
8Cage Type 6 will be finished same color as base. 9Polycarbonate parts used with Metal Halide lamps will eventually yellow. 10 Chimney and Access Top copper finished.
BALLAST TYPE 3
R=Reac./NPF 5
H=Reac./HPF
N=Hi. Reac./NPF
P=Hi. Reac./HPF
W=CWA
K=10KV CWA 6
I=Induction 1
OPTIONS (add as suffix)
1=Single Fuse (120 or 277V)
2=Double Fuse (208, 240, or 480V)
Y=Black Chimney
4=Internal NEMA photocontrol Receptacle
P=Polycarbonate Refractor 9
WH=White
BZ=Bronze
AP=Grey
DP=Dark Platinum
H=Hartford Green
U=UL/CSA Listed
C=Copper Accents 10
PRODUCT
FAMILY
ARC=Architectural
LAMP TYPE3
M=Metal
Halide 4
S=High
Pressure
Sodium
Q=Induction 1
LAMP
WATTAGE3
50=50W
70=70W
85=85W 1
10=100W
15=150W
17=175W
25=250W
40=400W 2
VOLTAGE 3
2=120V
0=208V
4=240V
7=277V
8=480V
9=347V
W=Multi-Tap
wired 120V
N=Multi-Tap
wired 277V
REFRACTOR
TYPE
3C=Cutoff III
5C=Cutoff V
TOP TYPE 7
5=Avenue
(Top Access)
CAGE TYPE 7, 8
6=Avenue
X=None
FINIAL TYPE
2=Modern
3=Architectural
OPTIONS
(See Below)
OPTIONAL COLORS [Standard color is black, other finish colors available. Consult your Cooper Lighting representative]
H
Hartford Green
WH
White BZ
Bronze AP
Grey DP
Dark Platinum
