Cooper Lighting Ametrix P2R User manual

Cover plate
1/4-20 x4"
(2x)
Exploded view and part call-out
Hex bolt
Canopy
(2x)
Wiring the fixture
. Replace canopy and secure usin both set screws.
(2x)
Set screw
Fixture head
#8-32 x3/8"
assembly
1. Remove both 1/4-20 x4 hex bolts from bottom of pendant.
2. Remove both #8-32 x3/8" set screws and allow canopy to
slide down pendant.
3. Run wires from J-box into pendant, ensure there is enou h
wire to reach cover plate.
4. Usin appropriate fasteners, secure fixture to ceilin . Use
additional bracing around J-box to support fixture.
Aiming the fixture
Attention:
Large fixtures require additional bracing/structure
around J-box to support fixture.
Secure cover plate
1/4-20 x4
1.
(2x)
Hex bolts
properly matched
Slide fixture assembly onto pendant and secure with both
Attach appropriate wires and ensure all connections are
1/4-20 x4 hex bolts.
2.
Cover plate
3.
1. To aim fixtures, loosen both #10-32 end screws on one
fixture. When both indicators are lined up, the slope of the
lens face is 40-de rees. Each subsequent notch is an
additional +/- 10-de rees.
2. When fixture head is rotated to the desired an le, reti hten
end screws to secure the position.
3. Repeat for second fixture head.
Fixture head
indicatorindicator
Yoke arm
#10-32
End screw
Mounting pendant to ceiling
Cover plate
#8-32 x3/8"
(by others)
J-box
3/8" fasteners
(by others)
Canopy
Set screw
(2x)
1/4-20 x4
Hex bolts
(2x)
These installation instructions are valid with the above Ametrix styles.
Sheet 1 of 3
that all sources of power are turned off. All
1
Visor and Non-Visor
3
Warning
2
performed by a certified electrician.
: Before startin any work ensure
work must meet local/national codes and be
Do not
mount fixtures vertically.
Installation Instructions
Vault C-Scroll Roundel
Large, INDOOR
P2R
(Pendant, 2-way, Remote ballast)
ADY071471 REV A(ECN070347)

Installation Instructions
Vault w/ visor C-Scroll w/ visor Roundel w/ visor
These installation instructions are valid with the above Ametrix styles
Warning : Before startin any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician. Do not
mount fixtures vertically.
Large, INDOOR
P2R
(Pendant, 2-way, Remote ballast)
Visor and Non-Visor
Sheet 2 of 3
ADY071471 REV A(ECN070347)
Mounting plate dimensions In[mm]
1
2"
12.70
on order
Length dependant
Top View
Side View
6"
19.05
114.30
"
152.40
6"
42
1
"4 2
1
114.30
19.05
"
4
3
3
4"
R1"
25.40

Lamping Size Chart
(lamps provided by others)
Installation Instructions
Vault w/ visor C-Scroll w/ visor Roundel w/ visor
These installation instructions are valid with the above Ametrix styles
Warning : Before startin any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician. Do not
mount fixtures vertically.
Large, INDOOR
P2R
(Pendant, 2-way, Remote ballast)
Visor and Non-Visor
Sheet 3 of 3
ADY071471 REV A(ECN070347)
FIXTURE SIZE
(inches/ mm) WATTAGE
# OF
LAMPS LAMP TYPE LAMP DESCRIPTION
Lamp
(not to scale)
16
1/2
/ 419.1 32 W 1 T4 Compact Flourescent
16
1/2
/ 419.1 42 W 1 T4 Compact Flourescent
16
1/2
/ 419.1 57 W 1 T4 Compact Flourescent
16
1/2
/ 419.1 100 W 1 ED17 Ceramic Metal Halide
16
1/2
/ 419.1 150 W 1 T6 Ceramic Metal Halide
16
1/2
/ 419.1 175 W 1 ED17 Ceramic Metal Halide
22
1/2
/571.5 mm 250 W 1 ET18 Metal Halide
22
1/2
/571.5 mm 400 W 1 ET18 Metal Halide
22
1/2
/571.5 mm 150 W 2 T6 Ceramic Metal Halide
22
1/2
/571.5 mm 32 W 2 T4 Compact Flourescent
22
1/2
/571.5 mm 42 W 2 T4 Compact Flourescent
22
1/2
/571.5 mm 250 W 1 ET18 Metal Halide
22
1/2
/571.5 mm 400 W 1 ET18 Metal Halide
22
1/2
/571.5 mm 150 W 2 T6 Ceramic Metal Halide
22
1/2
/571.5 mm 350 W 1 T3 Halogen(Double Ended)
22
1/2
/571.5 mm 500 W 1 T3 Halogen(Double Ended)
30
1/2
/ 774.7 36 W 1 T5 Twin Tube
30
1/2
/ 774.7 40 W 1 T5 Twin Tube
30
1/2
/ 774.7 50 W 1 T5 Twin Tube
30
1/2
/ 774.7 55 W 1 T5 Twin Tube
30
1/2
/ 774.7 36 W 2 T5 Twin Tube
30
1/2
/ 774.7 40 W 2 T5 Twin Tube
30
1/2
/ 774.7 50 W 2 T5 Twin Tube
30
1/2
/ 774.7 55 W 2 T5 Twin Tube
30
1/2
/ 774.7 250 W 2 ET18 Metal Halide
30
1/2
/ 774.7 400 W 2 ET18 Metal Halide
30
1/2
/ 774.7 900 W 1 T3 Halogen(Double Ended)
30
1/2
/ 774.7 1000 W 1 T3 Halogen(Double Ended)