Cooper Lighting Halo L50516 User manual

Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
10/31/2007 11:28:51 AM
Consult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice.
ADV070777
DESCRIPTION
A series of understated, balanced lampholders that come in a variety of
lamp types. The Stasis family of lampholders feature die cast and extruded
aluminum bodies with elegant free flowing lines. Ideal for accent and
display lighting applications. This Ceramic Metal Halide MR16 lampholder
is perfect for those applications where performance is required from a
discreet source.
A ... Quick-Lock Adapter
Die cast adapter attaches
electrically and mechanically
anywhere along track. Includes
discreet locking tab that locks
lampholder on track and allows for
easy removal and repositioning.
Two position conductor allows use
in single circuit and either circuit of
two circuit track.
B ... Lockable Aiming
Lampholder tilt and rotation can be
locked in place easily with the
included 1.5mm allen wrench.
C ... Switch
On-off switch allows power to be
turned off during lamp
replacement on individual
lampholders.
D ... Ballast Housing
Die cast and extruded aluminum
housing incorporates the lamp
control circuit.
E ... Lamp Housing
Aluminum die cast housing
provides lamp shielding and
includes a decorative bezel for a
finished look.
F ... Lampholder Arm
Arm allows the lamp housing tilt to
adjust +/-90°. It also pivots +/-90°
around the ballast housing. This
enables the ballast housing to
remain static on the track creating
a clean look, while providing full
aiming capabilities. The arm
employs graduations every 15° for
precise and repeatable tilt aiming.
Indicator mark on the bottom
ensures perfect lamp housing
alignment with track.
Labels
UL/c-UL Listed for use with Halo
Power-Trac and Lazer Track.
L50516
Stasis
20W Ceramic Metal Halide MR16
Power-Trac
A
B
C
D
F
E
B
4-1/2”
[114mm]
2-3/8”
[60mm]
2-1/4”
[57mm]
3-3/8”
[86mm]
Track
L=Halo Track
Lamp Type
5=Metal
Halide
Series
05=Stasis
Lamp
16=MR16
5L 05 16
Finish
P=White
MB=Black
Accessories
L100=Series Lenses (requires LM50516)
L100MB
LM50516=Lens holder
=Hex Cell Louver (requires LM50516)
Wattage
20=20 Watt
CMH
MR16
(Lamp Not
Included) AH =Aluminum
Haze
Energy Data
20W Electronic Ballast
Input Power: 23W
Power Factor: >0.95
Input Current: 0.20A max.
Harmonic Distortion: <10%
HALO®

HALO Track • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL [phone] • FAX [phone]/2007 11:28:51 AM
Specifications and Dimensions subject to change without notice.
ADV070777
.
.
L50516
L100 Series 2"50mm UV
and Color Filters
For use with MR16
Lampholders. Make a powerful
lighting statement by injecting
soft or intense hues to accent
any space.
L112=Red Gel Filter
L114=Ultraviolet, Dichoric Filter
L120=Red, Dichroic Filter
L121=Amber, Dichroic Filter
L122=Yellow, Dichroic Filter
L123=Green, Dichroic Filter
L124=Daylight Blue, Dichroic
Filter
L125=Blue, Dichroic Filter
L127=Cosmetic (2700oK),
Dichroic Filter
L130=Yellow Gel Filter
L131=Amber Gel Filter
L100 Series UV and
Color Filters
2"
[51mm]
1/8"
[3mm]
L110 Series
Optical Lenses
2"
(51mm)
L115L113L111L110
1/8"
(3mm)
L100 Series Optical
Lenses
L110N=Diffuse Sandblasted
Lens
Provides an even beam spread
from MR16 lamps----especially
useful in wall washing.
L111=Soft Focus Lens
Smooths irregular beam pattern
while maintaining high
controlled illumination levels
and beam angles of MR16
lamps.
L113=Prismatic Spread Lens
Provides a symmetrical
broadening of MR16 lamp
beams.
Suitable when a wide, uniform
light distribution is required.
L115=Linear Spread Lens
Fans out the MR16 beam 55o(27
1/2oto each side) to produce a
wide rectangular pattern.