Copernicus Premium Royal Inspiration Station User manual

Tub Channel
(6)
Tub (6)
Rear Whiteboard (1)
This assembly guide provides instructions to build the Premium Model of the Inspiration Station
You must have previously built the Base and Standard Models of the Inspiration Station
Royal Inspiration Station - Assembly Guide
PREMIUM
Upgrade
1-800-267-8494 or email [email protected]
Have your packing slip ready for reference
If parts are missing or you require assistance, please call:
Premium Model IS3-2008-B
Please Recycle
Life
Time Life Time
Frame
Warranty Tub Warranty
R
This Product is meant to be assembled by an Adult.
In its unassembled state, small parts present a hazard.
Not intended for use by children.
WARNING
RIS Assembly Instructions - Premium Model IS3 - Version B - Released 18 December 2007 - Copernicus Educational Products Inc.

Before beginning, you should have:
Hardware
Actual Size
Contents - Box 1
M6 x 20mm Bolt
Bag of 18
M6
Barrel Nut
Bag of 18
8mm
Lock Washer
Bag of 18
Open Tub
5x
Divided Tub
1x
Tub Channel
6x
Additional tools required: Adjustable wrench
In Box 1
Tiny Tub
6x
Rear Whiteboard
1x
Allen Key
2x
Royal Inspiration Station - Parts
Bag of
Extra Hardware
1x
R
RIS Assembly Instructions - Premium Model IS3 - Version B - Released 18 December 2007 - Copernicus Educational Products

This symbol denotes a 2 Person Task. For safety, please ensure that there are two
people working on steps displaying this symbol
Watch for this symbol throughout the Assembly Instructions. Wherever you see it, pay
close attention. The symbol denotes a step needing extra attention to ensure it is done
correctly
The Star symbol highlights an advisory note
Tips for Assembly - Using this Manual
2 Person
!
Watch for These Helpful Symbols
Before You Begin
As You Assemble the Unit
Layout and identify all of the included parts
The hardware has been packed according to size, separate them based on those sizes
Read the assembly instructions over once to familiarize yourself with them
Please note that in its unassembled state, this product contains parts that can be a
hazard to small children; it should be assembled by an adult.
Follow the steps in sequence
Before beginning each step, find the part(s) that you need for that step
Pay attention to the labeling on the parts, they are there to help direct you at certain stages
The title of each step states what you will be doing. Review the text and the pictures as you
build the unit.
After Assembly; Before Use
Remove the plastic film from the Whiteboard before writing on it
Clean the Whiteboard surface well with soapy water and then rinse clean; or clean the board
well with Soy Safe (Copernicus Product #AC405)
We recommend expo brand markers for all our whiteboards. Be sure to replace your
markers when needed.
RIS Assembly Instructions - Premium Model IS3 - Version B - Released 18 December 2007 - Copernicus Educational Products

Identify the top and bottom of the Tub Channels
Align the Tub Channels with the matching holes on the Rear and Middle Frame.
- Fasten middle bolt first, this will make the other two bolts easier to install
- Fasten with M6 20mm bolts, 8mm lock washers & barrel nuts
- Tighten fasteners
Top
1
Install Tub Channels
!
Tub Channel x 6
You will need: (Not to Scale)
x 18 x 18 x 18
Bottom
Actual Size: 20mm Barrel Nut 8mm
!
Fasten middle bolt first
RIS Assembly Instructions - Premium Model IS3 - Version B - Released 18 December 2007 - Copernicus Educational Products

Angle tub into the Channel
Tubs slide in the Channels
2
Place Tubs onto Unit
Angle the Tubs slightly when inserting into channel; rotate to fit over stop rib, then
slide into place
In position, the Tubs will slide smoothly in the Channels and be stopped from sliding
out unintentionally.
The six Tiny Tubs fit into one Open Tub.
Divided Tub x 1 Open Tub x 5
You will need: (Not to Scale)
Tiny Tub x 6
RIS Assembly Instructions - Premium Model IS3 - Version B - Released 18 December 2007 - Copernicus Educational Products

3
Hang Rear Whiteboard
Board may be hung vertically or horizontally
Secure the hanging board to the Round Accessory Rod using the hooks as shown below.
!
Rear Whiteboard x 1
You will need: (Not to Scale)
RIS Assembly Instructions - Premium Model IS3 - Version B - Released 18 December 2007 - Copernicus Educational Products

“My idea of education is to unsettle the minds of the young and inflame their intellects.” - Robert Maynard Hutchins
Use Soy Safe to help keep your Whiteboard
Surface looking new!
Copernicus Product #AC405
For Whiteboard Tips and Tricks,
refer to the card on the back of the whiteboard!!
4
Validate Your Warranty On-Line
To validate your ten year frame warranty & lifetime tub warranty, submit the ON-LINE form at
www.copernicused.com
Username: quality
Password: safety#1
Life
Time Life Time
Frame
Warranty Tub Warranty
RIS Assembly Instructions - Premium Model IS3 - Version B - Released 18 December 2007 - Copernicus Educational Products