Copernicus RC105 User manual

RC105 - Version A - Released October 28, 2021 - Copernicus Educational Products Inc.
Assembly Guide
RC105_2021_A
RC105
R o y a l
®
R eading/ W riting Center
Lifetime
Easel Component
Warranty
5 year
Whiteboard
Replacement
Program

2
RC105 - Version A - Released October 28, 2021 - Copernicus Educational Products Inc.
Before You Begin:
 Lay out and identify all of the included parts.
 The hardware has been packed according to step.
 Read the assembly guide over once to familiarize yourself with them.
As You Assemble the Unit:
 Follow the steps in sequence.
 Before beginning each step, find the part(s) that you need for that step.
 The title of each step states what you will be doing. Review the text and
the pictures as you build the unit.
Please read the warnings below for important safety information regarding your product. Failure to read these
warnings or to follow the instructions below could result in personal injury or damage to your product that could
void your warranty.
Small Parts
Adult
Supervision
In its unassembled state, this product contains parts that can be hazardous to small children.
This product should be assembled by an adult.
This product is to be used under the supervision of an adult.
No
Maintenance
This product does NOT require maintenance. Repairs should only be performed by
authorized personnel. Please contact customer service if repairs are required.
Climb
Hazard
Indoor Use
Only
Do not climb on, hang from or suspend objects from any components of your product
unless otherwise specified.
This product is intended for indoor commercial use only. To reduce the risk of fire or
electricshock, do not expose this product to rain or moisture. The internal components
are not sealed from the environment.
Tips for Assembly
Watch for These Helpful Symbols:
For safety, please have
someone help you when
working on steps
2-Person Task
displaying this symbol.
The symbol denotes a
step needing extra
attention to ensure it is
done correctly.
Important Information! Warning!

3
RC105 - Version A - Released October 28, 2021 - Copernicus Educational Products Inc.
1x
Before beginning, you should have:
Lower Frame
1 Left, 1 Right
M-Rack
Inner
M-Rack
Outer
M8 Lock Washer
12x
M6 Barrel Nut
12x
2x
Upper Frame
1 Left, 1 Right
2x
Rear Whiteboard
1x
1x
Tub Channel
4x
Front Frame Support
1 Left, 1 Right
2x
3” Caster
4x
Chart Loop Hook
2x
2x
Rear Whiteboard
Hooks
2x
Tools
Not to Scale
RC105
Royal Reading/Writing Center
OR
PTP-5
Premium Tub Pack Upgrade
Stubby Tubby Open Tub Tiny Tub
4x 2x 2x
Tub Channel
2x
C M6 x 15mm
4x
E
M8 Lock Washer
4x
F
M6 Barrel Nut
4x
1x
D
F
E
Allen Key
2x
Additional tools required:
Rubber Mallet 1x
Hardware
Actual Size
Base Shelf Front Frame
2x 1x
A M6 x 35mm
12x
B
In Box 1
M5 x 35mm
2x
Center Frame
1x
Ultra Safe Premium
Book Ledge
Stretcher
2x
C
M6 x 15mm
12x
M6 Lock Washer
14x
Hex Drive Drill Bit
1x
C68-4-1A
Open Book Tubs
Open Tub
4x
Tiny Tub
2x

4
RC105 - Version A - Released October 28, 2021 - Copernicus Educational Products Inc.
2X
!
!
Install Casters
Front
Actual Size:
A M6 x 35mm
4x
D
M6 Lock Washer
4x
You will need: (Not to Scale)
Center Frame
1x
Lower Frame
1 Left, 1 Right
2x
Hex Drive Drill Bit
1x
Install Center Frame & Rear Frame Lower
Note - L & R stickers
on the frames
R
L
Note - Front of
base is the end
with the brake
D D
D D A
A A
You will need: (Not to Scale)
1 Base
3” Caster
4X
Press Casters firmly into the Base:
ŸCasters will click into place
ŸIf necessary, tap the caster in
using a rubber mallet.
2
!
!
A

5
RC105 - Version A - Released October 28, 2021 - Copernicus Educational Products Inc.
Actual Size:
A M6 x 35mm
4x
D
M6 Lock Washer
4x
You will need: (Not to Scale)
Rear Whiteboard Hooks
2x
Stretcher
2x
Upper Frame
1 Left, 1 Right
2x
Hex Drive Drill Bit
1x
Install Front Frame Supports
Note - Front Frame
Supports angle outward
Use labels to help you
assemble correctly
D A
3
!
Build Rear Frame
1
L
R
L
R
2
A D
D
A
3
A D
D A
X 2
!
Note - install Rear Whiteboard
Hooks on top Stretcher before
fastening to frame.
Ensure hooks face back of unit!
Actual Size:
4 A M6 x 35mm
2x
D
M6 Lock Washer
2x
You will need: (Not to Scale)
Front Frame
Support
1 Left, 1 Right
2x
Hex Drive Drill Bit
1x

6
RC105 - Version A - Released October 28, 2021 - Copernicus Educational Products Inc.
Actual Size:
C M6 x 15mm
8x
E
M8 Lock Washer
8x
F
M6 Barrel Nut
8x
You will need: (Not to Scale)
Tub Channel
4x
Allen Key
2x
Install Top and Bottom Tub Channels
For RC105 PTP-5 setup please look inside boXlabelled “PTP-5”
for parts and assembly instructions. Complete this before
proceeding to step 6.
If you purchased the PTP-5 separately as an upgrade kit you can
install the parts on an already assembled RC105.
5A
!
!
!
Top
Bottom
F
E
C
C
E
F
F
E
C
C
E F
5B
PTP-5
ONLY

Actual Size:
C M6 x 15mm
4x
E
M8 Lock Washer
4x
F
M6 Barrel Nut
4x
You will need: (Not to Scale)
Shelf
Allen Key
1x
2x
Install Shelf
C
E
!
Ensure correct hole is used
Attach Whiteboard
1. Put brakes in the LOCKED / DOWN position
to help hold unit steady.
2. Fasten top fasteners first, then bottom.
B D B D
A D
A D
Use bottom
hole
8
RC105 - Version A - Released October 28, 2021 - Copernicus Educational Products Inc.
6
F
7
Actual Size:
A
M6 x 35mm
2x
B
M5 x 35mm
2x
You will need: (Not to Scale)
Front Frame
1x
D
M6 Lock Washer
4x

9
RC105 - Version A - Released October 28, 2021 - Copernicus Educational Products Inc.
Install Book Ledge
Note - the spring tension
is designed to discourage
children from unhooking
the book ledge
Install Big Book Rack Divider M-Racks
Note the orientation of the M-Racks
8
You will need: (Not to Scale)
Ultra Safe Premium
Book Ledge
1x
!
9
You will need: (Not to Scale)
M-Rack
Inner
1x
M-Rack
Outer
2x

10
RC105 - Version A - Released October 28, 2021 - Copernicus Educational Products Inc.
Attach Chart Paper Hooks
Place an empty hardware
bag over the frame to avoid
scratching the paint.
Hang Rear Whiteboard
10
You will need: (Not to Scale)
Chart Loop Hook
2x
!
11
You will need: (Not to Scale)
Rear Whiteboard
1x

11
RC105 - Version A - Released October 28, 2021 - Copernicus Educational Products Inc.
Place Tubs into Unit
Place Tubs into Unit
13B
RC105
PTP-5
ONLY
!
Look inside boXlabelled “PTP-5” for parts and
assembly instructions.
12
You will need: (Not to Scale)
Tiny Tub
2x
13A
RC105
ONLY
You will need: (Not to Scale)
Open Tub
4x