Corbin Russwin ED4800 Series User manual

1
ED4800, ED4800M & ED4800MA Series
Concealed Vertical Rod Exit Devices
Installation Instructions FM 322 /
ED4800M/ED4800MA
Top Latch & Bottom Bolt
Case
10 18

2
Maintenance
1. Periodically remove covers and coat mechanisms with a silicone
base lubricant. This is particularly required in corrosive
environments for proper product function.
2. Check mounting fasteners periodically. Retighten if found loose.
Apply screw looking compound (available at automotive part
stores) or change part fasteners if screws continue back up.
3. Periodic checks and adjustments of strike are required to
compensate for changes in the opening (e.g.; door sagging, etc....).
General Information
All
(No Trim)
All
(With Trim)
4
2
Rod Extension Options
ED4800 only
WARNING
This product can expose
you to lead which is
known to the state of
California to cause cancer
and birth defects or other
reproductive harm. For
more information go to
www.P65warnings.ca.gov.
08/2018

3

4

5

6

7

8

9
Page left intentionally blank

Page left intentionally blank
10

Page left intentionally blank
11

Copyright © 2008-201 Corbin Russwin, Inc., an ASSA ABLOY Group company. All
rights reserved. Reproduction in whole or in part without the expressed written
permission of Corbin Russwin, Inc. is prohibited.
In U.S.: Corbin Russwin, Inc.
225 Episcopal Road
Berlin, CT 06037-4004
www.corbinrusswin.com
In Canada: ASSA ABLOY
Door Security Solutions Canada
160 Four Valley Drive
Vaughan, ON, L4K 4T9
www.assaabloy.ca
Technical Product Support:
Telephone: [phone]
Fax: 8 0- -726 828 77
1