Schlage HDB User manual

*23737901*
23737901
1 Install HDB bracket
1a Select Appropriate Shim
HDB bracket
Glass
Shim with
compression pad
OR
1b Install HDB Bracket
• Install appropriate shim (padded side toward glass)
• Tighten set screws (3/32” hex wrench included)
Set screws
Shim with compression pad to be installed on top of glass
opposite the hinge side with the hole for the armature facing
toward the “push” side of the opening.
2 Prepare frame
2a Tape Template on HDB Bracket and Frame
• Align armature hole on template with armature hole in HDB
bracket
• Prepare frame holes per template
SINGLE DOOR
TEMPLATE
Armature hole
TEMPLATE TEMPLATE
DOUBLE DOORS
Armature holes
LHerculite Door Bracket (HDB) is to be used with glass doors.
M400 Series Electromagnetic Lock Kit
HDB
Installation Instructions

© Allegion 2014
Printed in China
23737901 Rev. 04/14-c
3 Install Magnetic Lock
3a Attach Armature Holder to HDB Bracket
2x
OUTSIDE
Armature
holder
HDB bracket
Armature holder
screws must be
ush to inside of
armature holder.
HDB
bracket
Armature
holder
3b Install Armature Plate
HDB
Bracket
Flat Washer
Star Locking Washer
Cone Washer
Armature Plate
Armature Holder
Armature
Bolt*
Shim
• Armature bolt must be tightened to 120 in-lbs.
• Use bolt supplied in HDB kit.
• M490 armature must be disassembled to replace armature bolt
3c Continue Installation Per Magnetic Lock Installation
Instructions
Customer Service
1-877-671-7011 www.allegion.com/us