Cornelius Nordic CCU0220 User manual

FEATURES:
NoRdic ccU0220 SERiES
Under CoUnter CUbed ICe Maker
CG5054-0112 Cubed ICe
Agion is a trademark of Agion Technologies, Wakefield, MA.
Protected by Agion
• Produces up to 251 lbs. (114 Kgs.) of ice per day
• 100 lbs. (45 Kgs.) built-in application storage
• Built in Agion Antimicrobial product protection
effective against mold, mildew and fungus
• Ultra low profile – only 39" (991 mm) tall and 24" (607 mm) wide
• Durable, rotomolded exterior cladding
• Large bin door opening for easy access
• Adjustable leg height

For more information or to place an order, contact your sales representative or authorized distributor.
OUTSIDE THE U.S.A.
Ph: 763.488.8200
Email: [email protected]
IN THE U.S.A.
Ph: 800.238.3600
Fax: [phone]
101 Broadway Street West
Osseo, MN 55369
www.cornelius.com
© 2012 IMI CORNELIUS
NUMBER OF WIRES . . . . . . . . . . . 3
MAX. FUSE SIZE . . . . . . . . . . . . . . 15
SHIPPING WEIGHT LBS (KGS.) . . 160 (73)
AGENCY LISTINGS . . . . . . . . . . . .
oPeratInG LIMItS
Ambient Temp. Range Air & Water 50° - 110°F (10° - 43°C)
Water Temp. Range 40° - 110°F (4.5° - 43°C)
Water Pressure Ice Maker Water in Min. 20 psi (1.4 bar)
Max. 60 psi (4.1 bar)
Condenser Inlet Water
(Water cooled only)
Min. 20 psi (1.4 bar)
Max. 60 psi (4.1 bar)
Model No.
Cond.
Unit
Ice Prod.
per 24 hrs.
at 70° Air /
50° Water
lbs. (Kgs.)
Ice Prod.
per 24 hrs.
at 90° Air /
70° Water
lbs. (Kgs.)
Water Used-Gals. (Ltrs.)
per 100 lbs. of ice 90°
Air / 70° Water
Kilowatts
Used per
100 lbs.
of ice 90°
Air / 70°
Water
Heat
Rejection
(Btuh)
Electrical
Rating
Min.
Circuit
Amp.
Ice Prod.
Use Cond. Use
CCu0220A*11 Air 238 (108) 175 (80) 30.3 (115) n/a 8.8 4609 115/60/1 11.9
CCu0220WH21 Water 232 (105) 192 (87) 36.3 (137) 166.9 (632) 6.6 4263 208-
230/60/1
4.4
CCu0220AH51 Air 211 (96) 143 (65) 32.7 (124) n/a 8.8 3774 230/50/1 4.9
CCu0220WH51 Water 210 (95) 174 (79) 36.6 (139) 156.3 (592) 6.3 3780 230/50/1 4.1
* Represents cube size. For full cube substitute an “F”, for half cube substitute an “H”.
Please note: air-cooled units require 6” (152 mm) clearance for air intake and exhaust.
1. Application bin storage is 100 lbs. (45 Kgs.) = 90% of Internal Volume x 34 lbs. per cubic foot
2. ARI bin storage is 74 lbs. (34 Kgs.) = 80% of Internal Volume x 30 lbs. per cubic foot
24" (610 mm)
33"
(838 mm)
6" (152 mm) to 7" (178 mm)
Adjustable Legs
Air Out -
Left Front
of ICE Maker Air In -
Right Front
of ICE Maker
16 3/8" (416 mm)
2 5/8" (67 mm )
Electrical Inlet
7/8 " (22 mm)
D Hole
ICE Maker -
Water IN
1/4" (6 mm)
Male Flare
30 1/16 "
(764 mm)
Water Condenser - Water OUT
3/4" (19 mm) FPT
Water Cooled Units Only
Water Condenser - Water IN
3/8" (10 mm) FPT
Water Cooled Units Only
6"
(152 mm)
9"
(229 mm)
32" (813 mm)
Bin & ICE Maker
Drain 3/4” FPT
2.69”
(68 mm)
9.56” (243) mm
23 5/8"
(600 mm)
24" (610 mm)
17 1/2" (444 mm)
Front View Side View Rear View
Cube Size: Width Depth Heigth
Full 7/8" (22mm) 7/8" (22mm) 7/8" (22mm)
Half 3/8" (10mm) 7/8" (22mm) 7/8" (22mm)