Cornelius Nordic CCU0300 Series User manual

FEATURES:
NoRdic ccU0300 SERiES
Under CoUnter CUbed ICe Maker
CG5055-0112 Cubed ICe
Agion is a trademark of Agion Technologies, Wakefield, MA.
Protected by Agion
• Produces up to 356 lbs. (162 Kgs.) of ice per day
• 130 lbs. (59 Kgs.) built-in application storage
• Built in Agion Antimicrobial product protection
effective against mold, mildew and fungus
• Low profile – only 39" (991 mm) tall and 30" wide (752 mm)
• Available with an air- or water-cooled condenser
• Durable, rotomolded exterior cladding
• Large bin door opening for easy access
• Adjustable leg height

For more information or to place an order, contact your sales representative or authorized distributor.
OUTSIDE THE U.S.A.
Ph: 763.488.8200
Email: [email protected]
IN THE U.S.A.
Ph: 800.238.3600
Fax: [phone]
101 Broadway Street West
Osseo, MN 55369
www.cornelius.com
© 2012 IMI CORNELIUS
NUMBER OF WIRES . . . . . . . . . . . 3
MAX. FUSE SIZE . . . . . . . . . . . . . . 15
SHIPPING WEIGHT LBS (KGS.) . . 205 (93)
AGENCY LISTINGS . . . . . . . . . . . .
oPeratInG LIMItS
Ambient Temp. Range Air & Water 50° - 110°F (10° - 43°C)
Water Temp. Range 40° - 110°F (4.4° - 43°C)
Water Pressure Ice Maker Water in Min. 20 psi (1.4 bar)
Max. 60 psi (4.1 bar)
Condenser Inlet Water
(Water cooled only)
Min. 20 psi (1.4 bar)
Max. 60 psi (4.1 bar)
Model No.
Cond.
Unit
Ice Prod.
per 24 hrs.
at 70° Air /
50° Water
lbs. (Kgs.)
Ice Prod.
per 24 hrs.
at 90° Air /
70° Water
lbs. (Kgs.)
Water Used-Gals. (Ltrs.)
per 100 lbs. of ice 90°
Air / 70° Water
Kilowatts
Used per
100 lbs.
of ice 90°
Air / 70°
Water
Heat
Rejection
(Btuh)
Electrical
Rating
Min.
Circuit
Amp.
Ice Prod.
Use Cond. Use
CCu0300A*11 Air 309 (140) 228 (104) 32.9 (124) n/a 8.6 5928 115/60/1 13.1
* Represents cube size. For full cube substitute an “F”, for half cube substitute an “H”.
Please note: air-cooled units require 6” (152 mm) front clearance for air intake and exhaust.
1. 90° / 70° figures are rated in accordance with ARI Standard 810.
2. All specifications and performance data are subject to normal manufacturing variances.
3. Application bin storage is 130 lbs. (59 Kgs.) = 90% of Internal Volume x 34 lbs. Per Cubic Foot
4. ARI bin storage is 112 lbs. (51 Kgs.) = 80% of Internal Volume x 30 lbs. Per Cubic Foot
Side View
28.61
29.97
Rear View
23.30
2.90
Electrical Inlet
7/8” DIA Hole
ICE Maker -Water In
1/4 O.D. Compression
31.45
Bin & ICE Make r
Drain 3/4” FP T
Water Condenser
Water Out 3/4” FPT
Water Cooled Units Only
Water Condenser
Water Out 3/8” FTP
Water Cooled Units Only
2.69
4.81
6.57
4.80 4.57 3.19
30.86
Front View
30.00
33.00
6.00 to 7.00
Adjustable Legs
(Air In)
(Air Out)
(Dimensions Are In Inches)
Cube Size: Width Depth Heigth
Full 7/8" (22mm) 7/8" (22mm) 7/8" (22mm)
Half 3/8" (10mm) 7/8" (22mm) 7/8" (22mm)