Cornell CTF-E43M User manual

TOWER CTF-E43M
FAN

General Safety Precautions
1. Thank you for your purchase of this appliance. Read all instructions
carefully. Keep this User Manual for future reference.
2. Always unplug the appliance from the power socket before cleaning
or when not in use.
3. Never immerse the appliance, power cord or plug into water or other
liquids. Please refer to section on “Care and Cleaning”.
4. Always attach the power cord to the appliance first BEFORE plugging
it into the power socket. To disconnect the appliance, switch it off first
before removing the power plug from the power socket.
5. Close supervision is necessary when operating the appliance near
children. Ensure that the power cord does not hang over the work
surface.
6. Do not operate the appliance with a damaged cord set, or plug. Any
repairs should always be carried out by the Customer Service Centre
or by an authorized service centre.
7. Do not use this appliance for any other purposes than its intended
use. This appliance is intended for household use only.
8. Do not use outdoors or in damp area.
9. Do not insert the fingers or other objects into the fan during operation.
Take care of the children especially.
10. Always place appliance on a flat sturdy surface.
11. Do not place the appliance on or near a hot gas or electric burner, or
near easily flammable material.
12. This appliance should not be used by the physically challenged, slow
response or mentally disabled people (including children) unless
guidance is provided during operation.
1

Parts Identification
Specifications
Model No.
CTF-E43M
Rated Voltage
220-240V~
Rated Power
45W
Frequency
50Hz
2
Control Panel
Main Body
Base

How to Use
Assembling Method
Unpack the fan from gift box.
Lay the Main Body horizontally on the ground.
Assemble the Front Base and Rear Base.
Operating Procedure
The fan is to be operated by adjusting the speed control knob at the
control panel.
Turn on the fan by turning the speed control knob to either speed
indicator with or without oscillation function.
To activate the fan without oscillation, turn the speed control knob
clockwise. The fan speed can be manually adjusted in sequence
from Low –Medium –High.
Low Speed with oscillation
Medium Speed with oscillation
High Speed with oscillation
To activate the fan with oscillation, turn the speed control knob anti-
clockwise. The fan speed can also be manually adjusted in sequence
from Low –Medium –High.
The fan can be stopped any time during any of the above operation
by turning the speed control knob to OFF.
3

Cleaning and Maintenance
Always disconnect the appliance from the power outlet before
cleaning.
Never immerse fan or cord in water, or allow moisture to contact with
the appliance.
Wipe the outer surfaces of the fan with a mild and damp cloth or
cleaner, never use a corrosive cleaner.
For proper storage, always place the fan in a low humidity
environment.
4