Corsair SF Series User manual

SF SERIES™
HIGH PERFORMANCE SFX POWER SUPPLY
MANUAL • MANUEL • MANUALE • MANUELLE • MANUAL DE
РУКОВОДСТВО • MANUAL • MANUELL • 用户手册 • 取扱説明書
SF600
SF450
SF750
SF SERIES™
WEB: corsair.com
PHONE: [phone]
SUPPORT: support.corsair.com
BLOG: corsair.com/blog
FORUM: forum.corsair.com
YOUTUBE: youtube.com/corsairhowto
© 2010-2018 CORSAIR MEMORY, Inc. All rights reserved.
CORSAIR and the sails logo are registered trademarks in the United States
and/or other countries. All other trademarks are the property of their respective
owners. Product may vary slightly from those pictured. 49-001769 AA

English 
Français 
Deutsch 
Italiano 
Español 
Россию 
Português 
Svenska 
中文 
日本語 

1 2
SF SERIES™SF SERIES™
PRODUCTSPECIFICATIONS
SF.................................................... 
SF.................................................... 
SF.................................................... 
Installation ........................................... 
ImportantSafetyInformation ......... 
Congratulations on the purchase of your
new CORSAIR Series High Performance
SFX power supply.
SF Series power supplies give you 80 PLUS Platinum eciency,
excellent electrical performance, and virtually silent operation in a SFX
form factor. With 105°C Japanese capacitors and Zero RPM fan mode,
they’re a great choice for high performance small form factor PC’s
where reliability and low noise are essential.
Safety and protection
• Over-voltage protection (OVP)
Over-voltage protection for the 12V, 5V and 3.3V DC outputs is
required to comply with the SFX specification. OVP shuts down the
PSU in the event that the DC outputs exceed a set level, determined
by the PSU manufacturer. The minimum voltage levels required for
compliance are 13.4V for the +12V rail(s), 5.74V for the +5V rail and
3.76V for the 3.3V rail.
• Over-current protection (OCP)
The SF Series features OCP on the 3.3V, 5V and 12V rails. OCP
ensures that the output of the DC voltage rails remains within
safe operating limits.
• Over-temperature protection (OTP)
OTP ensures that the PSU will shut down when the internal
temperature reaches a set point. This is usually as a result of
internal current overloading or a fan failure.
• Short-circuit protection (SCP)
A short-circuit is defined as any output impedance of less than
0.1 ohms. Amongst other things, SCP ensures that the PSU shuts
down should the 3.3V, 5V and 12V rails short to any other rail, or to
ground. It also ensures that no damage should occur to the unit, or
your PC’s components in the event of a short.

3 4
SF SERIES™SF SERIES™
Qty Description Total Length
1
ATX Cable 24 pin Connectors per cable
300mm
(± 10mm)
1
Total connectors
1
2
EPS/ATX12V 8 pin (4+4) cable Connectors per cable
400mm
(± 10mm)
1
Total connectors
2
2
PCIe 8 pin (6+2) cable Connectors per cable
500mm
(± 10mm)
2
Total connectors
4
2
SATA cable (4 SATA) Connectors per cable
445mm
(± 10mm)
4
Total connectors
8
1
Peripheral cable (4-pin) Connectors per cable
330mm
(± 10mm)
3
Total connectors
3
0 75
0
150 300 450 600
35
30
25
20
15
10
5
0
95
93
91
89
87
85
83
81
100
10 5020
CORSAIR SF750 POWER TABLE MAX LOAD MAX OUTPUT
MODEL RPS0115 +3.3V 20A
130W
PART NO. CP-9020186 +5V 20A
AC INPUT RATING 100–240V +12V 62.5A 750W
INPUT CURRENT 10A–5A -12V 0.3A 3.6W
FREQUENCY 47–63Hz +5Vsb 2.5A 12.5W
TOTAL POWER: 750W
SF750
CORSAIR SF750 POWER SUPPLY EFFICIENCY
input 115VAC input 230VACEFFICIENCY (%)
SYSTEM LOAD (%)
CORSAIR SF750 POWER SUPPLY FAN NOISE CURVE
FAN NOISE (db)
POWER OUTPUTS (WATTS)
CORSAIR SF750 DC CABLE LISTING
450mm 100mm 100mm
100mm 115mm 115mm
550mm 100mm 100mm 100mm
100mm 115mm 115mm 115mm
650mm
400mm
610mm
300mm
400mm
100mm
DIMENSIONS: 125mm (W) x 63.5 mm (H) x 100mm (L)
PACKAGE CONTENTS:
• CORSAIR SF Series power supply unit
• AC power cord
• DC modular cable set
• DC modular cable storage bag
• Cable ties
• CORSAIR case badge
• User manual
• SFX to ATX adapter
• Important safety information

5 6
SF SERIES™SF SERIES™
CORSAIR SF600 POWER TABLE MAX LOAD MAX OUTPUT
MODEL RPS0112 +3.3V 20A
120W
PART NO. CP-9020182 +5V 20A
AC INPUT RATING 100–240V +12V 50A 600W
INPUT CURRENT 10A–5A -12V 0.3A 3.6W
FREQUENCY 47–63Hz +5Vsb 2.5A 12.5W
TOTAL POWER: 600W
Qty Description Total Length
1
ATX Cable 24 pin Connectors per cable
300mm
(± 10mm)
1
Total connectors
1
1
EPS/ATX12V 8 pin (4+4) cable Connectors per cable
400mm
(± 10mm)
1
Total connectors
1
2
PCIe 8 pin (6+2) cable Connectors per cable
400mm
(± 10mm)
1
Total connectors
2
1
SATA cable (4 SATA) Connectors per cable
445mm
(± 10mm)
4
Total connectors
4
1
Peripheral cable (4-pin) Connectors per cable
330mm
(± 10mm)
3
Total connectors
3
CORSAIR SF600 DC CABLE LISTING
450mm 100mm 100mm
100mm 115mm 115mm
550mm 100mm 100mm 100mm
100mm 115mm 115mm 115mm
650mm
400mm
610mm
300mm
600mm
400mm
SF600
0 60
0
120 240 360 480
35
30
25
20
15
10
5
0
95
93
91
89
87
85
83
81
100
10 5020
CORSAIR SF600 POWER SUPPLY EFFICIENCY
input 115VAC input 230VACEFFICIENCY (%)
SYSTEM LOAD (%)
CORSAIR SF600 POWER SUPPLY FAN NOISE CURVE
FAN NOISE (db)
POWER OUTPUTS (WATTS)
DIMENSIONS: 125mm (W) x 63.5 mm (H) x 100mm (L)
PACKAGE CONTENTS:
• CORSAIR SF Series power supply unit
• AC power cord
• DC modular cable set
• DC modular cable storage bag
• Cable ties
• CORSAIR case badge
• User manual
• SFX to ATX adapter
• Important safety information

7 8
SF SERIES™SF SERIES™
SF450 CORSAIR SF450 DC CABLE LISTING
CORSAIR SF450 POWER TABLE MAX LOAD MAX OUTPUT
MODEL RPS0111 +3.3V 15A
100W
PART NO. CP-9020181 +5V 20A
AC INPUT RATING 100–240V +12V 37.5A 450W
INPUT CURRENT 10A–5A -12V 0.3A 3.6W
FREQUENCY 47–63Hz +5Vsb 2.5A 12.5W
TOTAL POWER: 450W
Qty Description Total Length
1
ATX Cable 24 pin Connectors per cable
300mm
(± 10mm)
1
Total connectors
1
1
EPS/ATX12V 8 pin (4+4) cable Connectors per cable
400mm
(± 10mm)
1
Total connectors
1
2
PCIe 8 pin (6+2) cable Connectors per cable
400mm
(± 10mm)
1
Total connectors
2
1
SATA cable (4 SATA) Connectors per cable
445mm
(± 10mm)
4
Total connectors
4
1
Peripheral cable (4-pin) Connectors per cable
330mm
(± 10mm)
3
Total connectors
3
450mm 100mm 100mm
100mm 115mm 115mm
550mm 100mm 100mm 100mm
100mm 115mm 115mm 115mm
650mm
400mm
610mm
300mm
600mm
400mm
0 45
0
90 180 270 360
35
30
25
20
15
10
5
0
95
93
91
89
87
85
83
81
100
10 5020
CORSAIR SF450 POWER SUPPLY EFFICIENCY
input 115VAC input 230VACEFFICIENCY (%)
SYSTEM LOAD (%)
CORSAIR SF450 POWER SUPPLY FAN NOISE CURVE
FAN NOISE (db)
POWER OUTPUTS (WATTS)
DIMENSIONS: 125mm (W) x 63.5 mm (H) x 100mm (L)
PACKAGE CONTENTS:
• CORSAIR SF Series power supply unit
• AC power cord
• DC modular cable set
• DC modular cable storage bag
• Cable ties
• CORSAIR case badge
• User manual
• SFX to ATX adapter
• Important safety information

9 10
SF SERIES™SF SERIES™
Installing your NEW SF Series
Step A: Removing your existing power supply
If you are building a new system, skip to Step B.
1. Disconnect the AC power cord from your wall outlet or UPS and
from the existing power supply.
2. Disconnect all the power cables from your video card,
motherboard and all other peripherals.
3. Follow the directions in your chassis manual and uninstall your
existing power supply.
4. Proceed to Step B.
Step B: Installing the CORSAIR SF Series power supply
1. Make sure the power supply’s AC power cable is not connected.
2. Follow the directions in your chassis manual and install the power
supply with the screws provided.
3. Connect the 24-pin main power cable from the power supply
directly to your motherboard.
4. Connect the eight-pin +12V (EPS12V) cable to the motherboard.
A. If your motherboard has an eight-pin +12V socket, connect the
eight-pin cable directly to your motherboard.
B. If your motherboard has a four-pin socket, detach the
four-pin from the eight-pin cable, and then plug this four-pin
cable directly to your motherboard.
5. Connect the peripheral cables, PCI-Express cables, and SATA cables.
A. Connect the peripherals cables to your hard drive and
CD-ROM/DVD-ROM power sockets.
B. Connect the SATA cables to your SATA SSD or hard drive’s
power sockets.
C. Connect the PCI-Express cables to the power sockets of your
PCI-Express video cards if required.
D. Connect the peripheral cables to any peripherals requiring
a small 4-pin connector.
E. Make sure all the cables are tightly connected. Be sure to save
any unused modular cables for future component additions.
6. Connect the AC power cord to the power supply and turn it on by
pushing the switch to the ON position (marked with “I”).

11 12
SF SERIES™SF SERIES™
Important safety information
CAUTION ELECTRIC SHOCK HAZARD!
1. Install in accordance with all manufacturer instructions and safety
warnings. Failure to do so may result in damage to your power
supply or system, and may cause serious injury or death.
2. High voltages are present in the power supply. Do not open the
power supply case or attempt to repair the power supply; there are
no user-serviceable components.
3. This product is designed for indoor use only.
4. Do not use the power supply near water, or in high temperature or
high humidity environments.
5. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus that produce heat.
6. Do not insert any objects into the open ventilation or fan grill area
of the power supply.
7. Do not modify the cables and/or connectors included with this
power supply.
8. If this power supply uses modular cables, use only manufacturer
supplied cables. Other cables might not be compatible and could
cause serious damage to your system and power supply.
9. The 24-pin main power connector has a detachable 4-pin
connector. This 4-pin connector is not a P4 or ATX 12V
connector. Do not force this cable in the P4 or ATX +12V socket
on the motherboard.
10. Failure to comply with any manufacturer instructions and/or any
of these safety instructions will immediately void all warranties
and guarantees.
Zero RPM mode
Zero RPM mode allows the fan to remain o during low to medium
loads. This technology uses various temperatures from inside the PSU
and the power output level to determine when active cooling is needed
for the PSU. When you’re pushing it hard the fan will turn itself on to
ensure that it gets the cooling it needs without any extra noise. For
the specific fan profile of your unit please refer to the specifications
section of that PSU.

13 14
SF SERIES™SF SERIES™
SPÉCIFICATIONSDUPRODUIT
SF.................................................. 
SF.................................................. 
SF.................................................. 
Installation ......................................... 
ConsignesdeSécurité
importantes ....................................... 
Nous vous remercions d’avoir acheté
l’alimentation SFX haute performance
de la gamme CORSAIR.
Les alimentations SF Series assurent une ecacité 80 PLUS Platinum,
d’excellentes performances électriques et un fonctionnement presque
silencieux dans un facteur de forme SFX. Grâce aux condensateurs
japonais de 105°C et au mode de ventilation Zero RPM, elles sont
idéales pour les ordinateurs performants de petite taille pour lesquels
la fiabilité et le faible bruit sont primordiaux.
Sécurité et protection
• Protection contre la surtension (OVP)
La conformité à la spécification SFX requiert une protection
contre la surtension au niveau des sorties CC 12V 5V et 3.3V.
Cette protection coupe l’alimentation lorsque les sorties CC
dépassent un seuil établi, déterminé par le constructeur de
l’alimentation. Les niveaux de tension minimum requis pour la
conformité sont de 13.4V pour le ou les rails +12V 5.74V pour le
rail +5V et 3.76V pour le rail 3.3V.
• Protection contre les surintensités (OCP)
Les rails 3.3V 5V et 12V des alimentations SF Series disposent d’une
protection contre les surintensités (OCP). Cette protection garantit
que la sortie en tension des rails CC s’inscrit dans les limites d’une
exploitation sûre.
• Protection contre les surchaues (OTP)
La protection contre les surchaues (OTP) garantit que
l'alimentation s'arrête lorsque sa température interne atteint un
seuil défini. Cette situation résulte généralement d'une surcharge
électrique interne ou de la défaillance du ventilateur.
• Protection contre les courts-circuits (SCP)
Un court-circuit se définit par toute impédance de sortie inférieure
à 0.1ohm. Entre autres opérations, la fonction SCP s'assure que
l'alimentation s'arrête si les rails 3.3V 5V et 12V entrent en court-
circuit les uns avec les autres ou avec la masse. La fonction SCP
garantit également qu’en cas de court-circuit, l’unité ainsi que les
composants de votre PC ne subissent aucun dommage.

15 16
SF SERIES™SF SERIES™
TABLEAU DE PUISSANCE
DE L’ALIMENTATION CORSAIR SF750
CHARGE MAXI SORTIE MAXI
MODÈLE RPS0115 +3.3V 20A
130W
RÉFÉRENCE PIÈCE CP-9020186 +5V 20A
ENTRÉE CA NOMINALE 100–240V +12V 62.5A 750W
COURANT EN ENTRÉE 10A–5A -12V 0.3A 3.6W
FRÉQUENCE 47–63Hz +5Vsb 2.5A 12.5W
PUISSANCE TOTALE: 750W
Qté Description Longueur
totale
1
Câble ATX 24broches Connecteurs par câble
300mm
(± 10mm)
1
Total des connecteurs
1
2
Câble EPS/ATX12V 8 broches (4+4) Connecteurs par câble
400mm
(± 10mm)
1
Total des connecteurs
2
2
Câble PCIe 8 broches (6+2) Connecteurs par câble
500mm
(± 10mm)
2
Total des connecteurs
4
2
Câble SATA (4 SATA) Connecteurs par câble
445mm
(± 10mm)
4
Total des connecteurs
8
1
Câble périphérique (4 broches) Connecteurs par câble
330mm
(± 10mm)
3
Total des connecteurs
3
LISTE DES CÂBLES CC CORSAIR SF750
450mm 100mm 100mm
100mm 115mm 115mm
550mm 100mm 100mm 100mm
100mm 115mm 115mm 115mm
650mm
400mm
610mm
300mm
SF750
DIMENSIONS: 125mm (I) x 63.5 mm (H) x 100mm (L)
CONTEN U DE L’EMBALLAGE:
• Alimentation CORSAIR SF Series
• Cordon d’alimentation CA
• Jeu de câbles modulaires CC
• Sac de stockage de câbles modulaires CC
• Attaches de câbles
• Badge de boîtier CORSAIR
• Manuel de l’utilisateur
• Adaptateur SFX vers ATX
• Informations de
sécurité importantes
0 75
0
150 300 450 600
35
30
25
20
15
10
5
0
95
93
91
89
87
85
83
81
100
10 5020
EFFICACITÉ DE L’ALIMENTATION CORSAIR SF750
EFFICACITÉ (%)
CHARGE SYSTÈME (%)
COURBE SONORE DU VENTILATEUR DE L’ALIMENTATION CORSAIR SF750
BRUIT DU VENTILATEUR (db)
PUISSANCE EN SORTIE (WATTS)
Entrée 115VCA Entrée 230VCA
400mm
100mm