Cosco Altura User manual

User Guide
Questions? Comments?
Missing Parts? Contact us:
www.coscojuvenile.com
©2009 Dorel Juvenile Group.
All Rights Reserved. Todos derechos
reservados.
www.djgusa.com [phone]
www.coscojuvenile.com
Made in CHINA. Hecho en CHINA.
Styles and colors may vary.
Los estilos y los colores pueden variar.
Distributed by (distribuido por) Dorel Juvenile
Group, Inc.,
2525 State St., Columbus, IN 47201-7494
Dorel Distribution Canada,
873 Hodge, St. Laurent, QC H4N 2B1
10/18/09 4358-4433E
Altura Stroller
Avila Stroller
Models 01900, 01951, CV042 & CV069
Spanish Guide: page 13
Guía en español: página 13
OR

FOR THE SAFETY OF YOUR CHILD, PLEASE READ THE FOLLOWING
WARNINGS AND ASSEMBLY INSTRUCTIONS AND KEEP FOR FUTURE
REFERENCE.
• Adult assembly required.
• CAUTION: Keep small parts away from children during assembly.
• NEVER LEAVE CHILD UNATTENDED. ALWAYS keep child in view
when in stroller.
• AVOID SERIOUS INJURY from falling or sliding out. ALWAYS use seat
belt. Check frequently to make sure it is secure.
• ALWAYS keep fingers away from moving parts, when folding,
unfolding or adjusting stroller to prevent finger entrapment.
• ALWAYS make sure stroller is FULLY OPEN AND LOCKED before using.
• ALWAYS use the brakes when stroller is stopped.
• ALWAYS remove protective material and poly bags and dispose before
assembly.
• NEVER put hot liquids in the cup holder.
• NEVER use stroller on stairs or escalators.
• NEVER rollerblade with stroller.
• NEVER allow children to play with or hang onto the stroller.
• NEVER allow children to climb into the stroller unassisted. Stroller
may tip over and injure child.
• NEVER place or hang parcels, bags or accessories on the handle or
canopy. The stroller may tip over or the canopy may collapse.
• This product will become unstable if a parcel bag or rack is used when
there is no provision for one.
• This product may become unstable if a parcel bag, other than the one
recommended by the manufacturer is used.
• This product will become unstable if the manufacturer’s recommended
load is exceeded.
• DO NOT carry additional children, goods or accessories in or on this
product except as recommended in the manufacturer’s instructions.
• NEVER place more than 2 lbs. (0.91 kg) in parent’s tray to prevent
tipping.
• NEVER place more than 10 lbs. (4.5 kg) in the storage basket. If
weight is exceeded, hazardous unstable conditions may exist.
• STROLLER is only for use with children up to 40 lbs. (18 kg), and
WHEN SEATED, the midpoint of the child’s head is at or below the top
of the stroller seat.
• ONLY use this stroller with ONE child at a time.
• STROLLER is for use with children who can sit up unassisted, and is
NOT recommended for newborns.
WARNING

Parts List
1 Rear axle
2 Rear wheels
4 Washers
2 Cotter pins
1
2 Hubcaps
2 Front wheels
Child’s tray
Parent’s tray
A
A
B
B
C
C
D
D
E
E
F
F
G
G
H
H
Styles and colors may vary.

• Lay out and identify all parts.
• Hardware for rear wheel assembly is located on axle.
• Do not return this product to the place of purchase. If any parts are missing, call Consumer
Relations at [phone]. Or visit our website at www.coscojuvenile.com.
• Include the model number and manufacture date (found on the stroller)
and a brief description of the part.
Assembling Your Stroller
Keep these instructions for future use
Assemble Stroller Frame
1. With the stroller laying flat on floor, lift
and unfold handle.
1
2
2. Slide lower braces into fittings on rear
legs until they click.
Pull on each brace to make sure
the braces are securely snapped
into fittings.
2
3
3. Open legs and lift stroller into the
upright position. Once upright, let
handle fall back
as shown.

Assembling Your Stroller
3
4
4. Insert handle into frame. Both sides
must be inserted at the same time
until they click.
Pull on each handle to make sure
handles are securely snapped into
fittings.
NOTE: Stroller was disassembled
for shipping purposes only, once
assembled stroller must not be
taken apart.
5
5. Slide the red button on handlebar to
the left and squeeze.
Hold button and lift handlebar. Stroller
will click when completely open and
locked.
6. Snap footrest over lower crossbar.
Push down.
6

2 Washers
4
Install Rear Wheels
NOTE: Hardware for rear wheel
assembly is located on axle.
1. Remove cotter pin and one washer from
axle leaving one washer on the axle.
With the spokes facing out, slide a wheel
onto the axle. Slide on a second washer
(Figure 1).
1
2
2. Insert straight side of cotter pin
through hole in axle (Figure 2).
Repeat steps on other rear wheel.
3. Snap hub caps onto both wheels
(Figure 3).
Assembling Your Stroller
3
Assemble Stroller Frame
7
7. Hook D-rings onto each side of the
stroller frame.

5
3. Turn stroller upside down. Hold the
axle assembly with the brakes toward
the handlebars. Push onto frame until
buttons “snap” into place (Figure 4).
Assembling Your Stroller
1
Install Front Wheels
1. Slide front wheel onto frame tube.
Wheel will click when installed
properly (Figure 1). Repeat for other
front wheel. Turn stroller upright.
Button
Front Wheels
4

Assembling Your Stroller
1
1. Open canopy. Snap parent’s tray onto
handlebar tubes.
1
1. Guide tray tabs into slots on
stroller frame. Push until tray clicks
into place.
2
2. To remove tray, pull out finger tabs
on both sides and slide tray out.
Install Parent’s Tray
Install Child’s Tray
6

7
Using Your Stroller
1
1. Step down onto red levers on both
rear wheels. To park stroller, BOTH
BRAKES MUST BE LOCKED. Lift up
levers to unlock brakes.
1
1. Unbuckle recline strap behind
backrest.
2
2. Lower seat back. NOTE: DO NOT
adjust the seat when your child is in
the stroller.
To Adjust Seat Position
To Use Brakes

Using Your Stroller
1
1. Place your child in the stroller, with
the crotch strap between the child’s
legs. Fasten both buckles.
2
2. Tighten straps snugly around
your child.
To Use Restraint System
• NEVER LEAVE CHILD UNATTENDED. ALWAYS keep child in view when
in stroller.
• AVOID SERIOUS INJURY from falling or sliding out. ALWAYS use seat
belt. Check frequently to make sure it is secure. Belts must be threaded
exactly as shown.
• Failure to follow these instructions could result in the serious injury or
death of your child.
WARNING
8

9
Using Your Stroller
3
3. To tighten straps, pull out bottom
loop (B) then pull on strap end. To
loosen straps, pull out top loop (C)
then pull out on buckle. If the straps
should come out of the buckle,
rethread as shown.
1
1. Pull canopy out to open.
2
2. Push to close.
To Use Canopy
A
B
C
D

Using Your Stroller
1
1. Lock rear brakes and remove your
baby. Close canopy. Slide the red
button on handlebar to the left
and squeeze.
2
2. Hold the button in and push
the handlebar down.
3
3. Hook red tab on the left of
the handlebar onto post stroller
frame tube. Stroller will stand alone.
To Fold Stroller
10

11
• Front wheels
• Rear wheels
• Axle
• Hardware bag for rear wheel assembly
• Child’s tray
• Parent’s tray
• To order parts call [phone].
• Include the model number and manufacture date (found on the stroller) and a brief
description of the part.
• We will ship replacement parts within two working days (in the United States).
Stroller Care and Maintenance
Replaceable Parts
• To clean stroller fabric and seat pad, use a sponge or damp cloth with cold water and
mild soap. Air dry only. Do not use harsh household cleaners or bleach to clean stroller.
• Restraint and crotch straps should be surface washed and air dried only. Do not place in
washing machine or dryer.
• Periodically, check for loose screws, worn parts, torn material or loose stitching. Tighten
or replace parts as needed.

One-Year Limited Warranty
Dorel Juvenile Group, Inc. warrants to the original purchaser that this product (Altura/
Avila Stroller), is free from material and workmanship defects when used under normal
conditions for a period of one (1) year from the date of purchase. Should the product
contain defects in material or workmanship Dorel Juvenile Group, Inc., will repair or replace
the product, at our option, free of charge. Purchaser will be responsible for all costs
associated with packaging and shipping the product to Dorel Juvenile Group Consumer
Relations Department at the address noted on front page and all other freight or insurance
costs associated with the return. Dorel Juvenile Group will bear the cost of shipping the
repaired or replaced product to the purchaser. Product should be returned in its original
package accompanied by a proof of purchase, either a sales receipt or other proof that the
product is within the warranty period. This warranty is void if the owner repairs or modifies
the product or the product has been damaged as a result of misuse.
This warranty excludes any liability other than that expressly stated previously, including
but not limited to, any incidental or inconsequential damages.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE
OTHER RIGHTS THAT MAY VARY FROM STATE TO STATE.
12

Guía del usuario
¿Preguntas? ¿Comentarios? ¿Faltan piezas?
Comuníquese con nosotros:
www.coscojuvenile.com
©2009 Dorel Juvenile Group.
All Rights Reserved. Todos derechos reservados.
www.djgusa.com [phone]
www.coscojuvenile.com
Made in CHINA. Hecho en CHINA.
Styles and colors may vary.
Los estilos y los colores pueden variar.
Distributed by (distribuido por) Dorel Juvenile Group, Inc.,
2525 State St., Columbus, IN 47201-7494
Dorel Distribution Canada,
873 Hodge, St. Laurent, QC H4N 2B1
10/18/09 4358-4433E
Altura Carriola
Avila Carriola
Modelos 01900, 01951, CV042 & CV069
13
OR

14
POR LA SEGURIDAD DE SU HIJO, POR FAVOR LEA LAS SIGUIENTES
ADVERTENCIAS E INSTRUCCIONES DE ENSAMBLE, Y GUÁRDELAS PARA
CONSULTA FUTURA.
• El armado debe ser realizado por un adulto.
• PRECAUCIÓN: Durante el armado, mantenga las piezas pequeñas fuera del
alcance de los niños.
• NUNCA DEJE AL NIÑO SIN SUPERVISIÓN. SIEMPRE mantenga al niño
a la vista cuando esté en la carriola.
• EVITE UNA LESIÓN GRAVE por caída o resbalamiento. SIEMPRE use el cinturón
de seguridad. Revise con frecuencia para asegurarse que esté asegurado.
• SIEMPRE mantenga los dedos alejados de las piezas movibles, al plegar,
desplegar o ajustar la carriola, con el fin de evitar que se atrapen los dedos.
• SIEMPRE asegúrese de que la carriola esté COMPLETAMENTE ABIERTA Y
BLOQUEADA antes de usarla.
• SIEMPRE use los frenos cuando la carriola esté parada.
• SIEMPRE quite el material de protección y las bolsas de plástico y
deséchelos antes de ensamblar.
• NUNCA ponga líquidos calientes en el apoyavasos.
• NUNCA use la carriola en escaleras ni escaleras eléctricas.
• NUNCA deje que los niños jueguen con ni se cuelguen de la carriola.
• NUNCA deje que los niños jueguen con ni se cuelguen de la carriola.
• NUNCA deje que los niños se suban a la carriola sin ayuda. La carriola
podría volcarse y lesionar al niño.
• NUNCA coloque ni cuelgue paquetes, bolsas ni accesorios en el asa ni en
la capota. La carriola podría volcarse o la capota podría colapsarse.
• Este producto se volverá inestable si se usa una bolsa de paquetes o una
rejilla cuando no hay provisión para ello.
• Este producto puede volverse inestable si se usa una bolsa de paquetes
diferente a la recomendada por el fabricante.
• Este producto se volverá inestable si se excede la carga recomendada por el
fabricante.
• NO cargue a otros niños, artículos ni accesorios dentro o sobre este
producto excepto lo recomendado en las instrucciones del fabricante.
• NUNCA coloque más de 2 lbs. (0.91 kg) en la charola de los padres, para
evitar volcaduras.
• NUNCA coloque más de 10 lbs. (4.5 kg) en el cesto de almacenamiento.
Si el peso se excede, podrían existir condiciones inestables peligrosas.
• La carriola es sólo para niños que pesen hasta 40 lbs. (18 kg), y que
AL ESTAR SENTADOS, el punto medio de la cabeza del niño está al nivel
o más abajo que el borde superior del asiento de la carriola.
• SÓLO use esta carriola con UN niño a la vez.
• LA CARRIOLA debe usarse con niños que pueden sentarsesin asistencia,
NO se recomienda para recién nacidos.
ADVERTENCIA

Lista de piezas
15
A
B
C
D
E
F
G
1 Eje trasero
2 Ruedas traseras
4 Arandelas
2 Pasadores de
chaveta
2 Tapones de cubos
2 Ruedas delanteras
Charola para el niño
Charola para los padres
A
B
C
D
E
F
G
H
H
Los estilos y colores
pueden variar.

• Presente todas las piezas e identifíquelas.
• Los elementos de ferretería para el armado de las ruedas traseras se encuentran en el eje.
• No devuelva este producto al lugar donde lo compró. Si faltara alguna pieza,
llame a Consumer Relations al [phone]. O visite nuestro sitio web en
www.coscojuvenile.com.
• Incluya el número de modelo y la fecha de fabricación (se encuentran en la carriola)
y una breve descripción de la pieza.
Guarde estas instrucciones para consulta futura
Ensamble el armazón de la carriola
1. Con la carriola colocada
horizontalmente sobre el suelo,
levante y despliegue el asa.
16
2. Deslice los soportes inferiores en los
acoples de las patas traseras hasta
que encajen con un clic.
Jale cada soporte para asegurarse
de que los soportes hayan encajado
firmemente en los acoples.
3. Abra las patas y levante la carriola
a la posición vertical. Una vez
en posicion
vertical, deje
que el asa caiga
tal como se
muestra.
1
2
Cómo ensamblar su carriola
3

17
Cómo ensamblar su carriola
4. Inserte el asa en el armazón.
Ambos lados deben insertarse
simultáneamente hasta que encajen
en su lugar con un clic.
Jale cada una de las asas para
asegurarse que estén bien encajadas
en su lugar.
NOTA: La carriola se desarmó
para su envío solamente; una vez
ensamblada, la carriola no se
debe desarmar.
6. Encaje el descansapies sobre la
barra transversal inferior. Empuje
hacia abajo.
5. Deslice hacia la izquierda el botón
rojo del asa del manubrio y apriete.
Mantenga el botón apretado y levante
el asa del manubrio. La carriola hará
clic cuando esté completamente
abierta y
bloqueada.
4
5
6

18
Cómo ensamblar su carriola
Ensamble el armazón de la carriola
7. Enganche los anillos en D a cada lado
del armazón de la carriola.
7
2 Arandelas
Instale las ruedas traseras
NOTA: Los elementos de ferretería para el
armado de las ruedas traseras se encuen-
tran en el eje.
1. Quite el pasador de chaveta y una
arandela del eje de modo que quede
sólo una arandela en el eje. Deslice una
rueda, con los rayos hacia fuera, en el
eje. Deslice la otra arandela (Figura 1).
1
2
2. Inserte el lado recto del pasador de
chaveta a través del orificio del eje
(Figura 2). Repita el procedi- miento
para la otra rueda trasera.
3. Encaje los tapones de los cubos en
ambas ruedas (Figura 3).
3