Costway FP10074US User manual

FP10074US
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
ICE MAKER
Machine à Glaçons

EN
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in
which they will be placed in use, to avoid moving the product unnecessarily once
assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from babies
and children as they potentially pose a serious choking hazard.
FR
Veuillez lire attentivement toutes les instructions.
Conservez les instructions pour vous y référer ultérieurement.
Vérifiez toutes les pièces et les accessoires.
Lisez attentivement chaque étape et suivez l’ordre correct.
Nous recommandons que, dans la mesure du possible, tous les produits
soient assemblés à proximité de la zone où ils seront utilisés, afin d’éviter tout
déplacement inutile du produit une fois assemblé.
Placez toujours le produit sur une surface plane et stable.
Conservez toutes les petites pièces de ce produit et les matériaux d’emballage
hors de portée des bébés et des enfants, car ils pourraient présenter un risque
d’étouffement.
Avant de Commencer
02

IMPORTANT SAFETY INSTRUCTIONS
Your safety and the safety of others are very important.
We have provided many important safety messages manual and
your appliance.
Always read and obey all safety messages.
This is the safety alert symbol:
All safety messages will follow the safety alert symbol and the
word “DANGER” or “WARNING”.
These words mean:
You can be killed or seriously injured if you don’t immediately
follow instructions.
All safety messages will tell you what the potential hazard is, tell
you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
DANGER
WARNING
EN
03
EN

EN
When using electrical appliances, basic safety precautions should
be followed to reduce the risk of fire, electric shock, and injury to
persons or property. Read all instructions before using any
appliance.
Do not operate this，or any other appliance with a damaged
cord.
Connect to properly polarized outlets only. No other appliance
should be plugged into the same outlet. Be sure that the plug is
fully inserted into the receptacle.
Do not run the power cord over carpeting or other heat
insulators. Do not cover the cord. Keep cord away from traffic
areas, and do not submerge in water.
We do not recommend the use of an extension cord, as it may
overheat and become a risk of fire. If you must use an extension
cord, use No.14 AWG minimum size and rated no less than
1875 watts.
Unplug the ice maker before cleaning or making any repairs or
servicing.
IMPORTANT SAFETY TIPS
PREPARING YOUR ICE MAKER FOR USE
04

EN
Exercise caution and use reasonable supervision when appliance
is used near children.
Do not use your ice-maker outdoors. Place the ice-maker away
from direct sunlight and make sure that there is at least 4 inches
of space between the back of your unit and wall. Keep a minimum
distance of 4 inches on each side of your unit free.
Do not use other liquid to make the ice-cube other than water.
Do not clean your ice maker with flammable fluids. The fumes
can create a fire hazard or explosion.
Do not tip over.
If the ice maker is brought in from outside in wintertime, give it
a few hours to warm up to room temperature before plugging it
in.
If the supply cord is damaged, it must be replaced by the
qualified person in order to avoid a hazard.
This ice maker must be positioned so that the plug is accessible.
Disconnect the mains plug from the supply the supply socket
when not in use, where supply connection is via mains plug.
WARNING: This appliance must be earthed.
05
EN

EN
v
Warning:
W K v
W
W
v
WARNING:
T v
v
v
GETTING TO KNOW YOUR UNIT
IMPORTANT:
06

EN
GETTING TO KNOW YOUR UNIT
UNIT
OPERATION PANEL
A
WA
WA
FA
SMAWA T
TT T
WA FA
A
W
WA
W
07

EN
OPERATING PROCEDURES & MAINTENANCE
1.Remove the exterior and interior packaging. Check that ice
scoop is included. If you have any trouble, please ask qualified
technician for help.
2.Clean the interior with lukewarm water and a soft cloth. Take
out the ice basket and clean it.
3.Find a location for your ice maker that is protected from direct
sunlight and other sources of heat (i.e.: stove, furnace, radiator).
Place the ice maker on a level surface. Maker sure that there is at
least 4 inches of space between the back and sides of your ice
maker and the wall.
4.Allow one hour for the refrigerant fluid to settle before plugging
ice maker in.
5.The appliance must be positioned so that the plug is accessible.
6.Before placing water bottle on the unit, be sure that the drain
plug on the back is tightly fastened.
7.Hold the water bottle vertically and upside down (over the unit)
and place the water bottle into the SMART CORE for the water
bottle. Apply slightly pressure in order to pierce the bottle cap
with the spigot. This unit accepts two, three or five gallon water
bottle with pierceable sealed caps.
UNPACKING YOURICE MAKER
PLACEBOTTLE
VERTICALLY
STRAIGHT DOWN
08

EN
* Improper use of the grounded plug can result in the risk of
electrical shock. If the power cord is damaged please ask qualified
technician for help.
1.This unit should be properly grounded for your safety. The
power cord of this appliance is equipped with a three-prong plug
which mates with standard three prong wall outlets to minimize
the possibility of electric shock.
2.Plug your appliance into an exclusive, properly installed,
grounded wall outlet. Do not under any circumstances, cut or
remove the third (ground) prong from the power cord. Any
questions concerning power and/or grounding should be directed
toward a certified electrician.
3.This appliance requires a standard 110-120V~ 60Hz, electrical
outlet with three-prong ground.
Before using your ice maker, it is strongly recommended to clean
it thoroughly.
1.Take out the ice basket.
2.Clean the interior with diluted detergent, warm water and a soft
cloth.
3.Then use the water to rinse the inside parts, and drain out the
water by unplugging the drain cap on the side.
4.The outside of the ice maker should be cleaned regularly with a
mild detergent solution and warm water.
5.Dry the interior and exterior with a soft cloth.
6.When the machine is not in use, open water drained cap to drain
water completely from water reservoir.
CONNECTING YOURICE MAKER
CLEANING AND MAINTAINING YOURICE MAKER
DANGER
09

EN
USING YOURICE MAKER
MAKING THE ICE -CUBE
1.Press “ON/OFF” on the control panel to begin the ice making
cycle.
2.Select the size of the ice cube by pressing the “Select” button.
3.The ice making cycle lasts 6 to 15 minutes, depending on the
size of the ice cube selection and the ambient temperature. And
during the extreme temperature, the lasting time maybe vary a
lot.
4.If water pump can’t inject water, the ice maker will stop
automatically, and the “ADD WATER” indicator will be on on the
operation panel. Please check the water bottle and replace a new
bottle full of water.
Press “ON/OFF” button again to start the unit again.
And if the new bottle full of water is replaced and the “ADD
WATER” indicator is still on because of water pump not working
properly, please check the two water filter:
A.The water filter is located in the bottom of water tank, first
check it is blocked or not. Otherwise clean it.
B.The water filter is displayed in following figure. Release the
clipper and take down the water pipe, then take out the water
filter and clean it, then install back and use the clipper to fasten
the water pipe again.
10

EN
Allow the refrigerant liquid inside the compressor at least 3
minutes to settle before restarting.
5.The ice maker automatically stops working when the ICE light
on the operation panel is on means that ice basket is full.
ENJOY THE COLD WATER
The cold water can be enjoyed only after the ice-making have
worked for more than half hour.
1.Press the button to pop up the cold water faucet.
2.Press the “WATER” Water Dispensing Button on the operation
button to dispense the cold water to your cup. Release pressing till
your cup is full of the cold water.
TOP COVER
CLIPPER
WATER FILTER
WATER PIPE
11

EN
TROUBLESHOOTING
Push this button to let the
cold water faucet pop up.
PROBLEM POSSIBLE CAUSE SOLUTION
“WATER”
indicator is on.
Lack of Water.
One of two water
filter is blocked.
Stop the ice maker,
replace with a new
bottle full of water,
and then restart it.
Check both of water
filter and clean it.
12

EN
“ICE” indicator
is on.
Ice cubes stick
together.
The ice basket is full
of the ice-cube.
The ice cycle is too
long.
Pull the ice basket
and empty it.
Stop the ice maker,
and restart it when
the ice blocks melt.
Select the small ice
button.
Water temperature in
inner tank is too low.
Change the water in
the inner Tank.
Temperature of water
is better set between
8OC-32OC/46OF-90OF.
Ice making
cycle is normal
but no ice is
made.
Ambient
temperature or
water temperature
in inner tank is too
high.
Please run the ice
maker below
32OC/90OF and pour
colder water into
tank.
Refrigerant liquid
leakage.
Verify by a qualified
technician.
Pipe in the cooling
system is blocked.
Verify by a qualified
technician.
13

EN
USING YOUR ICE MAKER
TECHNICAL PARAMETERS
Model
Description
Protection Type
Climate Type
Power Rating
Ice-making Rated Current
Ice-harvest Rated Current
Refrigerant
Vesicant
Enclosure
Ice maker using bottled water,
with cold water dispensing function
I
SN/N/ST/T
110-120V/60Hz
2.0A
2.7A
R290 / 33g
C5H10
Stainless steel
FP10074US
14

EN
CIRCUIT DIAGRAM
ELECTRICAL
DIAGRAM FOR
ICE-MAKER
POWER
SUPPLY
MICRO SWITCH FOR
FAUCET DETECTING
DC Pump FOR
Water FAUCET
N
L
G
ICE
LED3 LED2 LED1
WATER
WATER
T1
T1
T2
MCU
SM
M
7C
SET
ON/OFF
ON/OFF
SENSOR FOR ICE
FULL DETECTING
SENSOR FOR
CONTROLING
FAN MOTOR
WATER DETECTING
SWITCH
MICRO SWITCH
MICR0 SWITCH
MAIN CONTROL PCB
COMP
-PUMP+
-PUMP+
+FAN-
DC Fan Motor
DC Water Pump
COMPRESSOR
MW
AC-N
AC-L Relay
Relay Relay
AW
Motor For Ice shovel
Solenoid
Valve
Start Relay
Over 1oad
Protector
VALVE
OPERATION PCB
MOTOR
15

CONSIGNES DE SÉCURITÉ IMPORTANTES
Votre sécurité et celle des autres sont très importantes.
Nous avons fourni de nombreux manuels de messages de sécurité
importants et votre appareil.
Lisez et respectez toujours tous les messages de sécurité.
C'est le symbole d'alerte de sécurité:
Tous les messages de sécurité suivront le symbole d'alerte de
sécurité et le mot « DANGER » ou « AVERTISSEMENT ».
Ces mots signifient:
Vous pouvez être tué ou gravement blessé si vous ne suivez pas
immédiatement les instructions.
Tous les messages de sécurité vous indiqueront quel est le danger
potentiel, vous indiqueront comment réduire les risques de
blessure et vous indiqueront ce qui peut arriver si les instructions
ne sont pas suivies.
DANGER
ATTENTION
FR
16

v
v
v
-v
A
r -v
r
v v v
r
r v oy
r
CONSEILS DE SÉCURITÉ IMPORTANTS
PRÉPARATION DE VOTRE MACHINE À
GLAÇONS POUR L'UTILISATION
FR
17

F v v
r o
v r
-v
v r
v
oy v v
v
v r
r
v r r
r
r
r
AVERTISSEMENT :
FR
18

k v
v
v
Avertissement:
V v
AVE TIS v v
AVE TIS
AVE TIS
y
AVERTISSEMENT :
P
v
APPRENDRE À CONNAÎTRE VOTRE UNITÉ
IMPORTANT:
FR
19

APPRENDRE À CONNAÎTRE VOTRE UNITÉ
UNITÉ
PANNEAU DE COMMANDE
SO
P A
OU E
VI A E EAU
A
SMA
U A
T A
EA
P
P
MA E A ÊT
Vy
L EAU
Vy
A
V y
T
T y
P T
FR
20