Costway FP10179US User manual

ELECTRIC FIREPLACE
FP10179US
USER’S MANUAL
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled
near to the area in which they will be placed in use, to avoid
moving the product unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product
away from babies and children as they potentially pose a serious
choking hazard.
02

MODEL NO. : SF230-25J/FP10179US
IMPORTANT
READ ALL INSTRUCTIONS BEFORE USING YOUR ELECTRIC FIREPLACE. FAILURE
TO FOLLOW THE INSTRUCTIONS MAY LEAD TO DAMAGE TO THE MACHINE OR
PERSONAL INJURY.
KEEP THIS USER MANUAL FOR FUTURE REFERENCE.
Tip for First-Time Use
When using this fireplace for the first time, or after a long period of storage, let
the fireplace run for at least 15 minutes with the thermostat set at the maximum
heat level to remove the “new product” smell. The smell is because the fireplace
absorbs moisture, creating an odor similar to that of old leather. It will go away
after a few minutes of use.
Safety Instructions
Please read the following instructions before attempting to assemble,
operate, or install this product.
● Do not use this product with missing damaged, or broken legs.
● Do not use this product outdoors. This product is for indoor use only.
● This product is not intended for use in bathrooms, laundry areas, and similar
indoor locations. Do not place this product where it may fall into a bathtub or
other water container.
● This product is hot when in use. To avoid burns, do not touch surfaces with
bare skin. If necessary, use handles when moving this product. Keep combustible
materials such as furniture, pillows, bedding papers, clothes, and curtains at
least 3ft from the product.
● Do not use this product in an elevated location, such as on a shelf, raised
platform, countertop.etc.
● Do not run the power cord of this product under carpeting, throw rugs,
runners, or similar items. Arange the cord away from high-traffic areas so that it
will not be tripped over.
● Extreme caution is required when the product is used near children or invalids
and whenever the product is left operating unattended.
● Do not operate this product with a damaged power cord or plug, after the
appliance malfunctions, or the product is damaged. Any repairs to this appliance
should be carried out by a qulifed service person.
● Under no circumstances should this product be modifed. Parts removed for
service must be replaced prior to using this product. Connect to properly
grounded power outlets only.
03

● Always plug the fireplace directly into a wall outlet. An extension cord, outlet,
or power strip should never be used with this product.
● This product, when installed, must be electrically grounded in accordance with
local electrical codes. For the USA: National Electric Code ANSINFPA No.70. For
Canada: CSA C22.1Canadian Electrical codes.
● To disconnect this product, turn the product off from the control panel, then
remove the power plug from the outlet.
● Aways unplug this product if you do not plan to use it for a long period of time.
● Do not insert or allow foreign objects to enter any ventilation or exhaust
openings as this may cause an electric shock, fire, or damage to the appliance.
Safety Instructions
● To prevent possible fires, do not block air intakes or exhausts in any manner.
Do not use on soft surfaces, like a bed, where the opening may be blocked.
● The fireplace has hot, sparking, and arcing parts inside. Do not use it in areas
where gasoline, paint, or flammable liquids are used or stored. This appliance
should not be used as a drying rack for clothing.
● Use this appliance only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or personal
injury.
Electrical Safety
● A15- amp,120-volt, 60 Hz circuit with a properly grounded outlet is required.
Preferably, the item will be on a dedicated circuit. Having other appliances on
the same circuit may cause the circuit breaker to trip or the fuse to blow while
the product is in operation. The product comes with a 6 ft (1.8m) long power
cord with a 3-prong plug, which is located on the right side of the appliance.
● Electrical outlet wiring must comply with local building codes and other
applicable regulations to reduce the risk of fire, electical shock, and personal
injury.
CAUTION - Risk of Fire or Explosion due to
Flammable Refrigerant Used.
Follow Handing Instructions Careully in
Compliance with National Regulations.
WARNING Cancer and Reproductive Harm
www.p65wamings.ca.gov
Risk of fire
04

● Do not use this item if any part of it has been submerged in water.
Immediately call a qualified service technician to inspect the item and replace
any part of the electrical system which has been underwater.
● This product is equipped with a polarized plug where one prong is wider than
the other. For your safety, please insert the plug correctly. If you are unable to
insert the plug into the electrical outlet, try reversing the plug. If the plug still
does not fit, contact a qualifled electrician.
● Always plug the unit into a wall outlet. An extension cord, power strip, outlet
extender, or any similar products should never be used with this product as it
may increase the risk of fire.
US 3-Pin Polarized Plug
Technical Specifications
This product is equipped with a 3-pin polarized plug. Connect to properly
grounded outlets only. This unit is for use on 120 volts outlets only. For your
safety, please always plug the unit into a wall outletreceptacle. An extension cord
or power tap (outlet/power strip) should never be used with this device.
Power Supply
Rated Current
Rated Power
Adjustable Thermostat
Heating Element
110-120V/ 60Hz
12.7A
1400W/ 4780BTU
62℉-82℉
Convective Fan Heater
Timer 30min - 6hrs
Lighting Effect LED
Dimensions(HxWx D) 27 x 26 x 11.5 inches
68 x 66 x 29 cm
Remote Control Yes
05

Control Panel
Dimensions
LED Screen
Indicators
Timer
Heater ON/OFF
Flame Control
Main Power
1.LED Screen: Displays information about the settings you are using.
2.Indicator Lights:There are 3 indicator lights below the LED screen - red,
green, and blue.
a.Red - Indicates that the LED screen is displaying the temperature in degrees
Fahrenheit.
b.Green - Indicates that the LED screen is displaying the temperature in
degrees Celsius.
c. Blue - Indicates that the timer function is in use.
3.Timer: Controls the amount of time that the heater and/or flame effect will
run before powering off. See section below for more details.
Press the main power button to turn on the fireplace.
06

Control Panel
USING THE HEATER CONTROL
1.Press the heater on/off button to turn on the heating function.When turn it
on, the heater will keep in“ ON" mode automatically.
2.When the heater is on, long press the heater button for 5 seconds to enter
the temperature setting adjustment. The LED screen will start flashing.
3.Press the heater button to cycle through the temperature level.
4.After choosing your heat level, wait for the LED screen to flash 2 times. Y
our temperature is now set.
4.Heater On/Off Control:Controls how much heat is produced by the fireplace.
For safety concerns, this function must be used together with the flame effect.
See section below for more details.
5.Flame Control: Controls the flame colors. See section below for more details.
6.Power Switch:The power switch supplies power to all functions of the
fireplace.This switch must be in the ON position for any of the below functions
to work.
Note: The heater will automaticlly pause
after reaching the set temperature in your
room. If the heater control is set to" ON"
mode, the heater will work nonstop until
you shut it off manually.
16°C
17°C
18°C
21°C
22°C
23°C
26°C
27°C
ON
1
2
3
6
7
8
11
12
13
...
...
...
...
Button
Press
Celsius
Temperature
62℉
63℉
64℉
72℉
73℉
74℉
81℉
82℉
ON
1
2
3
11
12
13
20
21
22
...
...
...
...
Fahrenheit
Temperature
Button
Press
07

To switch from Fahrenheit to Celsius (or vice vera), press and hold the main
power button for 5 seconds. The LED screen will flash 2 times to confirm your
settings.
USING THE FLAME CONTROL
Press the flame control button to cycle through the flame controls. The default
flame color is Red after powering on.
USING THE TIMER FUNCTION
The timer button is used to control the time of the flame and/or heater
function.
If the heater and/or flame effect are powered on when you enter the timer
adjustment mode, those settings will be under the control of the time you set.
Press the timer button repeatedly to cycle through the timer settings.
The blue indicator light will power on once you have confirmed a timer.
The LED will show the timer you set for 2 seconds, then the timer is finish set.
Button Press Timer Interval Display
1st press
2nd press
3rd press
4th press
5th press
6th press
7th press
8th press
30 Minutes
1 Hour
2 Hours
3 Hours
4 Hours
5 Hours
6 Hours
0FF
30
1 h
2 h
3 h
4 h
5 h
6 h
None
Button Press Display Value
1st press
2nd press
3rd press
Low
Medium
High
08

USING THE REMOTE CONTROL
The remote control can be used up to 13 feet (4 meters ) away from the
heater, as long as there are no obstacles between the remote and the heater.
REMOTE CONTROL BATTERIES
Press and slide the battery cover on the rear of the remote and remove the
cover. The remote is equipped with button batteries.
NOTE: Do not mix old and new battries together in the remote. Do not mix
alkaline, standard (carbon-zinc), or rechargeable (NiCad, NiMh, etc.) batteries
together.
Cleaning & Maintenance
● Always turn the fireplace OFF and unplug the power cord from the outlet
before cleaning.
● Use a vacuum cleaner or duster to remove dust and dirt from the fireplace
and vent areas.
Thermostat Control
UP
DOWN
Power Button
Flame Control
Timer Setting
09

● Clean with a soft, damp cloth and buff with a dry cloth to maintain the luster of
this product.
● Never use abrasive cleaners, liquid sprays, or any cleaner that could scratch
the surface of the appliance.
Troubleshooting
Customer Support
Problem Possible Cause(s) Corrective Action
The fireplace
doesn't operate
Power light is
ON, but the
flame effect is
not visible
Excessive
noise when
the fireplace
is operating
●The fireplace is not plugged in.
●Make sure the
fireplace is plugged
into a standard 120V
outlet.
●Check additional
appliances on the
circuit. Ideally, the
fireplace should be on
a dedicated 15-amp
circuit.
●Unplug the unit.
Clear the vent area of
dust and debris. Wait
for 10 minutes, plug
the unit in again, and
turn on the fireplace.
●Contact customer
service.
●A circuit breaker is tripped or
a fuse is blown.
●The vents are dirty or clogged.
●The fireplace is not operating
correctly.
●The fan is defective.
●The fireplace assembly is
defective.
●Contact customer
service.
●Contact customer
service.
●The ON/OFF switch is defective.
●There is loose wiring.
●The fireplace switch is defective.
●The fireplace assembly is
defective.
10

Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
Contact Us!
Do NOT return this item.
US office: Fontana UK office: Ipswich AU office: Truganina
DE office: Hamburg
FR office: Saint Vigor d'Ymonville PL office: Gdańsk
US:[e-mail]
UK:[e-mail]
AU:[email protected]