Costway AP2134 User manual

www.costway.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Visit us: www.costway.com
Follow Costway
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
Inflatable Bed
AP2134

2
www.costway.com
3
www.costway.com
Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: [e-mail]
UK: [e-mail]
Before You StartBefore You Start
Please read all instructions carefully.
Retain instructions for future reference.
Seperate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
WARNING: Remember not to use it while driving to avoid
unnecessary trouble
Inflation Instructions
Using a DC12V or AC electric pump to inflate the inflatable bed: open the air nozzle cover plug
the DC 12V or AC electric Pump into the power supply connect the medium nozzle to the
electric Pump coven insert the nozzle into the air inlet of the bed, and turn on the power switch
to inflate. The saturation of the inflation must be controlled at about 95%. Then turn off the
power switch to stop inflation, remove the electric pump, and just cover the air nozzle cover for
using.
Deflation, Folding and Storage:
1. Open the air nozzle cover on the side of the air bed to make并naturally deflated. If you need
to deflate more quickly you can fold or squeeze the bed.
2. Press and release the remaining air in the bed when folding for multiple times.
3. Put the bed into a carrying case and store it in a clean and dry place for the next time use.
4. Regular Maintenance and cleaning of the inflatable bed.
WARNING:
1. Do not get close to sharp objects during use and place them on a flat surface.
2. Do not get close to flammable objects or sources of ignition.
3. Do not use on water or near water
4. Please do not jump on the bed, which may cause
personal injury or damage to the bed.
5. Please do not use the bed in a very cold place. Please inflate the airbed at a normal
temperature. PVC materials will become hard and brittle in cold conditions and easily get
damaged. Do not use any heating equipment or hair dryer because it will cause damage to the
bed.
6.Ifthe inflation bed is dirty just clean it with a damp cloth and do not use any chemicals.

5
Welcome to visit our website and purchase our quality products!
Reward Points
Exclusive Customer Service
Personalized Recommendaons
Permanent Shopping Cart
Order History
We would like to extend our hearelt thanks to
all of our customers for taking me to assemble
this product and giving us valuable feedbacks.
www.costway.com
Your suggestions and comments for COSTWAY are really important to us!
We sincerely solicit you to go back to our shop and leave a good rating in just a
simple click. It would be quite encouraging if you could kindly do so like below:
February 24, 2019
Great products so far. Fast delivery, easy setup, and working without any issues.
Great products so far
With your inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
www.costway.com
4
www.costway.com
Patching Instructions:
Needle eye repair
1. After the bed is deflated, cover the nozzle and reduce the gas
flow in the bed.
2. Take out the glue in the repair kit and add a drop of glue to the needle eye to complete the
repair Wait for four hours before refilling.
3.Ifthe needle eye is large, take a toothpick, apply the glue on thettip of the toothpick, apply it
to the damaged area and fill the needle eye with glue.
4. After the repair is completed, wait for four hours before refilling.
Repair scratches and burns
1. After the bed is deflated, cover the nozzle and reduce the gas
flow in the bed.
2. Find the patch material in the repair kit and cut a piece that needs to fully cover the broken
seam.
3. Apply the glue to the damaged area, press the patch, and glue the edges of the patch.
4.Apply pressure to ensure there are no gaps on the rubber surface and press it with smooth,
heavy objects.
5. Wait for elght hours before inflating and repair is completed.
Flocking surface repair
1. Carefully clean the repair area.
2. After drying, remove the patch, cut it and cover it over the damaged surface to allow the
patch to be a little more than the surrounding leather
3. Apply alayer of glue to the patch and the damaged surface, and glue the edges of the patch
to ensure a complete seal.
4. squeeze it with a smooth, heavy object.
5. Press it with heavy objects for 24 hours, then inflate and the repair is completed.