Costway HW58760 User manual

USER'S MANUAL
Sit-to-Stand Electric Desk Riser
HW58760
TIPS：
Your suggestions and comments for Costway are really important to us!
We sincerely solicit you to go back to our shop and leave a good rating in just a
simple click. It would be quite encouraging if you could kindly do so like below:
February 24, 2018
Great product so far. Fast delivery, easy setup, and working without any issues.
Great products so far
With your inspiring rating, Costway will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
UNITED STATES
CANADA UNITED KINGDOM
GERMANY
FRANCE
ITALY
SPAIN
JAPAN
RUSSIA
AUSTRALIA

PARTS ASSEMBLY INSTRUCTION
A Desk Riser X1 B Keyboard Tray X1
C Center Knob X1
(D Side Knobs X2) E Table Connector X1
F Power Cord X1 G Keypad X1
Step1:
Place B(Keyboard Tray) onto E(Table Connector)
Step2:
Hold B(Keyboard Tray) and attach C (Centor
Knob) into E(Table Connector). Firmly screw
C(Center Knob) and D(Side Knobs).
A
B
D
E
B
E
D
C
C

G Keypad use instruction:
liting up liting down
Step3:
Plug F(Power Cord), all set.
ASSEMBLY INSTRUCTION
WARNINGS
WARNINGS
System Initialization
F
G
Drive the desk to the desired height when
pressing and holding “↑” or “↓” button.
If the system doesn’t work normally when we
use it, we need reset the system, to make the
system be initialized.
Resetting procedure is as follows, press both
"↑” and "↓" button together for about 15s and
you can hear a beep. And then lifting columns
will go down to its lowest position when holding
the “↓” button, you will hear the beep for three
times, and the whole step finishes.
1.This product must meet the actual technical
parameters in use.
2.The system should be away from water and
corrosion resistant gas.
3.Prevent direct sunlight and avoid long time
sunlight exposure.
4.Do not put overweight on the desktop and
keyboard.
5.Please contact us if there is anything wrong
with the product.