Costway HW63923 User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
USER’S MANUAL
Sit Stand Stool
HW63923

3
(1) Base x1
Seat cushion x1
Gas Lift x1
Gas Lift Cover x1
1. This item is not a barstool & should not be used as one.
2. Stool can be tilted. But please make sure both feet on the
ground while tipping the stool when seating.Make sure the
angle of the tipping should not exceed 15 degrees.
3. Do not stand on this chair,do not use this chair as a step
ladder.
4. Use this product only for seating one person at one time.
5. Do not use this chair unless all bolts,screws and knobs
are firmly secured.
Failure to follow these warnings could result in serious injury.
(2)
(3)
(4)
WARNING

4
Note: Turn the Seat Cushion (3) upside
down. Press the Gas Lift Cover (4)
into holes at the bottom of Seat
Cushion.Turn right to fix the Gsa
Lift Cover (4) with Seat Cushion (3).
1
45
23
(4)
(3)
(3)
(2)
(1)
(2)
(2)
Step 1
Note: Insert Gas Lift (2) into the center
hole of Base (1).
Step 3
Please remove protective sheath before
assembly of seat cushion.
Step 2
Note: Position the Seat Cushion (3) over Gas Lift (2)
and push down firmly until the connection is secure.
Step 4
Your Sit Stand Stool is now complete and ready for use.
Step 5