Costway AT4534 User manual

USER’S MANUAL
SEILLODELCIHEVSBL00051
4354TA

Page 2
Specifications
Rated Capacity 1500 lb. per dolly
Casters
(per dolly)
Two swivel casters
Two swivel casters with brakes
Important Safety Information
1. Study, understand, and follow all
instructions before operating this device.
2. Do not exceed rated capacity.
3. Use only on hard level surface.
4. Before moving a load, assure that
the load is centered and secured
with a load restraint device.
5. No alterations shall be
made to this product.
6. Wear ANSI-approved safety goggles
and heavy-duty work gloves during use.
7. Keep clear of load’s path while
placing on and removing from
dollies, and while moving.
8. Use as intended only. Do not use for
aircraft purposes. Use only in pairs.
9. Inspect before every use; do not
use if parts loose or damaged.
10. Be aware of dynamic loading! Sudden
load movement may briefly create
excess load causing product failure.
11. Use two Vehicle Dollies to support
the front or rear end of the vehicle.
Use four Dollies (two pairs) to
support entire vehicle.
12. Read vehicle owner’s manual
and instruction manual for
Jack (not included) for proper
jacking positions before use.
13. Position carrying handles to outer
side of car; do not work under
vehicle while on Dollies.
14. If used for extended storage
under vehicle tires, periodically
lift vehicle to rotate tires.
15. Keep lifting area free of spectators
and do not allow anyone into
vehicle while on Dollies.
16. Use wheel chocks when raising front
of vehicle for placement onto Dollies.
17. Assemble only according to instructions.
Improper assembly can create hazards.
18. This product is not a toy. Do not allow
children to play with or near this item.
19. Maintain product labels and nameplates.
These carry important safety
information.

Page 3
Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
Assembly
1. Insert Brake Casters (2) and Casters (3)
through holes in Frame (1), making
sure Brake Casters are on same
outer side. Fasten using Washers (6),
Lock Washers (5) and Nuts (4).
2. Once Dollies are assembled, roll Dollies
along surface to verify all connections
are secure and Dollies roll freely.
Operation
1. Chock opposite end wheels
to keep vehicle from rolling.
Chocks sold separately.
2. Place Dolly in position under raised
front or rear wheels and lower
vehicle slowly onto Dollies.
3. To move a vehicle supported by
four Dollies: remove wheel chocks,
unlock Casters, and use Handles
to guide vehicle to location.
4. Lock casters once vehicle is in location.
Parts List and Diagram
Part Description Qty.
1 Frame with Handle 2
2 Caster With Brake 4
3 Caster 4
4 Nut 8
5 Lock Washer 8
6 Washer 8
Note: Some parts are listed and shown
for illustration purposes only, and are not
available individually as replacement parts.
Handle