Country Living D71 M80754 User manual

OWNER’S
MANUAL
Date of purchase: _____/ _____/ _____
Ashmore 7 Piece
Dining Set
Product code: D71 M80754
UPC code: 7-6945575814-9
1
Vendor Item: AS-J-252-3T

2
PARTS
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
A (1)
Table Rim (16 Bolts and
16 Metal Washers attached)
B (4)
Metal Leg
ACCESSORIES
Ed (1)
Assembly
Instructions Sheet
Ee (40 + 3 spares)
Tile Pad
C (2)
Tile 1
Ea (1 spare)
Bolt
Eb (1 spare)
Metal Washer
D (2)
Tile 2
Ec (1)
Allen Wrench

3
CARE INSTRUCTIONS
Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents.
Cover furniture with outdoor furniture covers when not in use.
Made in CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
For questions or comments about product:
Call toll-free:
800-457-4652
Please refer to part numbers when reordering
sears.com
ASSEMBLY INSTRUCTIONS
1Place the table rim (A) upside on a flat surface.
Attach a leg to the table rim (A), align the holes
in the bracket of the metal leg (B) with the holes
in the table rim (A). For each hole, insert a bolt (Ea)
through a metal washer (Eb), through the bracket
of the metal leg (B) and secure into the table rim (A).
See Fig. 1. Don’t tighten completely. Repeat
procedure for the other three legs.
2
Your table is ready for use.
Securely tighten all bolts diagonally by using
Allen wrench (Ec). Turn the table over. Evenly
attach tile pads (Ee) to each side in the table
rim (A). See Fig. 2. Place the tiles 1 (C) and
tiles 2 (D) onto the table rim. Level the table
by adjusting leg feet up and down as desired.
See Fig. 3.
Fig. 1
Fig. 2
Ea
Eb
A
B
C
D
D
C
A
Ee
Fig. 3