Coxo C-SMART-I Parts list manual

*Thanks for using the endodontic treatment instrument.For the
sake of safety and efficient use of the product, please read this manual carefully.
C-SMART-I
C-SMART-I
ENDODONTIC TREATMENT INSTRUMENT
Usage manual
0482

Content
Ⅰ
Ⅱ
Ⅲ
Ⅳ
Ⅴ
Ⅵ
Ⅶ
ⅰ.
ⅱ.
Ⅷ
Ⅸ
Ⅹ
Ⅺ
Ⅻ
Safety caution
Introduction and technical parameter
Standard configuration
Structure and theory
Assemble
Function and settings
Use method
ⅰ.
ⅱ.
ⅲ.
Mode and function
Program settings
Apex position setting
Preparation before the use
Operation
ⅲ.Power manage
Maintenance and sterilization
Troubleshooting
Services for product and technology
Transportation and storage
Mark illustration

1
ⅠSafety caution
Before use, please read the safety instruction
carefully for making good use of this manual.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
'
'
,
.
.
,: ,
.'
,
;.
,
.
.
'.
.
.
.
,
This unit must be used comply the user s guide, not for other
Please refer to the usage instruction strictly. We won t take
for the damage caused by improper use.
Before using the main power make sure the power voltage is
according with the adaptor voltage range Improper input
will damage the unit and cause danger to the operator or
patient
Do not drag the wire, which connects to the endo motor emphatically.
would be broken or be loosened and then affect the natural use.
Please use the original accessories such as endo motor adap-
and battery We won t take the responsibility to any problem or
caused by using other parts, which are not supplied by us.
To avoid electric shock please do not insert any other parts into
unit it may cause electric shock or damage
Avoid the detergent going into the unit in case that causes the
circuit or problem
Please turn off the instrument immediately when something wr
It s not allowed to modify the unit at any condition Any
disassembling or modification may cause the invalidation of the
guarantee
Please use the intact standard file Or it would cause damage to
the patient while working
Prevent the instrument from environmental electromagnetic
When there is a patient who is using the cardiac
is an electronic operation please do not
the machine around.
Unstable voltage and being under electromagnetic environment
will interfere the normal operation.
purpose.
the responsibility
voltage
the
Or it
tor
damage
the
short
ong
interference.
pacemaker or there
put
When discard the accessories please abide with the local
regulation if necessary contact our service center to recover it
This unit is just for the professional user
,
,
,
,, .
.
11.
12.

ⅡIntroduction and technical parameter
Intended use:
Features:
Main technical parameter
C-Smart -I is the supplementary root-canal treatment device,
assist the dentists to operate more standard root canal in the
process root canal treatment.
Colorful, wide LCD screen
Rotation speed and torque can be adjusted, with 9 memory settings.
Automatic torque reverse
Dual-frequency apex locator
5 operation modes
Automatic apex reverse and stop
Automatic slow down in apex zone
Automatic motor start and stop
High capacity Li-ion rechargeable battery
Automatic power off and automatic memorized
Adaptor voltage: Input VAC 5 Hz
Output 10V DC / 1.5 A
Battery rechargeable Li-ion battery DC 7.4V/1000mAh
Power 5W
Current 500mA
Rotation speed 125-625rpm
Torque 3-52 mN.m)
which
can
of
100-240 0/60
0.3-5.2 N.cm (
Protection against electrical shock: type B
-
-
:
：
：
：
：
:
≤
2

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Main unit
Adaptor
Foot switch
Test wire (single & dual hole)
Contra angle(CX235-1)
Motor handle
File holder
Stainless electrode
Handle base
Usage manual
Torque card
The silicone sheath installation card
ⅢStandard configuration:
1pcs
1pcs
1pcs
2pcs
1pcs
1pcs
2pcs
4pcs
1pcs
1pcs
1pcs
1pcs
Main unit
Adaptor
Motor handle
Contra angle(CX235-1)
Foot switch Test wireFile holder
Stainless electrode Handle base
Usage manual
*Thanks for applying the endodontictreatmentinstrument. For
thesake of safety and efficient use of the product, please read this manua
C-SMART-II
lcarefully
.
C-SMART-I
ENDODONTICTREATMENT INSTRUMENT
Usage manual
3

ⅣStructure and theory
Main unit:
②．foot switch jack
①．adaptor jack
test wire jack
endo motor jack
on/off button forward/reverse button
mode select button
program select button
adjust button
set button
4

①
②③
⑥
⑦
④
⑤
⑧
LCD display:
①
②
③
④
⑤
⑥
⑦
⑧
Mode module
Forward & reverse sign: display for forward or reverse rotation
Apex locator module
Rotation speed setting value
Torque setting value
Current torque indicator
Program select
Battery power display
5

2.
.
Insert the foot switch plug
into the jack on the main
unit
1.
.
Please put the instrument on
a solid place
3.
,
Connect the plug of the mot-
or wire to the main unit m-
ake sure that they are in the
right position.
4.Connect the 1:1 contra
angle to the motor and
clamp the file into the
contra angle
ⅤAssemble
øIn automatic function ,
foot switch is unnecessary.
M3-M5( )
6

5. And then put the well conn-
ected main unit on the handle
holder reposefully.
6.Insert the adaptor plug into
the jack on the main unit
Notice: when the instrument is being used , please don t use the
adaptor for avoiding the electromagnetic interference
'
.
8. And connect the file holder
and stainless electrode to test
wire.
IF ONLY USE THE APEX LOCATOR FUNCTION (M )
2
7.
()
please insert the test wire
dual holes to the hole on the
main unit
only for charge.
7

USE MOTOR WITH APEX LOCATOR FUNCTION M M(3-5)
9.please insert the test wire
(single hole) to the hole on the
main unit.
10
silicone sheath intalla-
tion card
.Connect the stainless electr-
ode to test wire and hang the st-
ainless strap on the contra angle.
(see the
)
8

ⅥFunction and settings
ⅰ. Mode and Function
.
This unit has 5 modes and consists of 5 function options
Manual functions, file rotates in the setting speed.
When the file is approaching to apex, the file automatic-
ally slows down for safer treatment
Automatic reverse 2 the file reverses automatically
and starts rotating automatically upon withdrawal.
Working Mode Table
FUNCTION OPTIONS
The file speed in the apical constriction
The rotating direction of the file in the setting apex
location
NORMAL
SLOW DOWN
AUTO MATIC2
：
：
：,
MODE
M1
M2
M3
M4
M5
Apex
ü
ü
ü
Slow down
Automatic2
Normal
ü
ü
ü
Function option
Start/stop
ü
ü
ü
ü
üü
ü
ü
9

auto star auto stop
without
auto stop
10
If not select the AUTO MATIC 2 function, the file will stop when the
file goes to the setting value.
START/STOP
APEX
：
：
The file starts rotating automatically when inserted into
the canal and it stops automatically upon withdrawal
Apex locator
slow down
operation depth operation depth

indicate
reach the
setting
turque
turque
disappe-
ared
：， ,
，
.
M1 Manual motor mode press foot switch, file rotates forward when
the torque reaches the setting torque file reverses automatically
and will rotate forward when the torque is disappeared Release
the foot switch, the file stops.
,
stamp
5MODES
11
In Mode, you can assemble the unit as follow:M1In Mode, you can assemble the unit as follow:M1

：M2
NOTICE: It can not get an exact value of the apex length when the
treatment is in an unstable condition. So, please insert
the file into the root-canal and take an X-ray photo to
make sure the veracity.
In this mode, only apex locator functions, methods of operation are
as follows:
1. The plug of the testing wire should be completely plugged into
hole on the main unit.
12
In Mode, you can assemble the unit as follow:M2In Mode, you can assemble the unit as follow:M2

2. Clip the metal part of the file with the holder and hang the
stainless electrode up at any side of the patient's mouth.
3. Insert the file into the root canal and circumrotate the file toward
the apex of the root-canal. And then the distance between the tip of
the file and the apex of the root-canal will be displayed on the LCD
screen. When the figure on the LCD screen shows 0.5mm please
fasten the file with the rubber vernier caliper on the reference point
of the tooth crest rather than keep up probing into the root canal
Then measure the distance from the bottom of rubber vernier
caliper to the tip of the file
Root canal length is the file distance when the LCD displays 0.5.
-，
,
-.
.
*-
13
Xü
*'When you need to pull out the test wire, please don t pull the wire but
hold its pin and pull it out.

4. Deciding the working length of root canal
When the figure on the LCD screen shows 0.5mm then measure
distance from the bottom of rubber vernier caliper to the
file Take note of this figure So
,
..
the
tip of the subtract 0.5-1.0mm
from the above data is the working length of root-canal.
When the file drills through the root-canal, please make the final
value in terms of the one measured in 0.5mm
The working length of root-canal varies from each other for the
reason of different shapes of teeth and root-canal.
5. When the file reaches the position to 2.0mm away from the apex
of the root canal there will be a continuous alarm
.
-, .
30 20 10
2.0mm
operation depth
beep
14

the setting
apex ( the
setting
range from
1.0to0.0
mm)
auto stop
0.5mm
operation depth
reach the
setting
apex
position
M3:,
.
Apex locator and motor function the file starts to rotate forward
when it enter the root canal and when it reach the setting apex
position, the file stops working
15
InM3-M5(Automaticmotormodes),footswitchisunnecessary.
In Mode, you can assemble the unit as follow:M3-M5In Mode, you can assemble the unit as follow:M3-M5

M4:
,
Apex locator & auto reverse 2 motor& automatically start and
stop function. The file starts to rotate forward when it entering
into the root canal and reverse when it reaches the setting
apex position and stops automatically upon withdrawal.
auto star
0.5mm
operation depth
auto stop
reverse
16

:
.
.
Apex locator & auto reverse 2 motor & automatically start and
stop & slowdown The file starts to rotate forward when it entering
into the root canal and automatically slows down when
approaching to apex and reverses automatically when it reaches
the setting apex position and stops without touching the root canal
M5
the
setting
apex
auto star
slow down
operation depth
auto stop
0.5mm
operation depth
reverse
17

：
,
.
Notice When the torque reaches or exceeds the setting torque in
M3-M5, and no matter the root canal enlarged file
reaches the set data or not the file will reserves
automatically
the setting
apex
reach the
setting
turque
Reverse REVERSE
REVERSE
:,
.
Press the “ ” button file will reverse and you can
change the forward and reverse by press the “ ”
button
press
18