Owner’s Instructions
Caution: Read all instructions and warnings before operating.
SAVE THESE INSTRUCTIONS! READ ALL INSTRUCTIONS!
NOTE: To avoid serious injury or death from electrical
shock or fire:
1. DO NOT handle this fixture or try to plug it in when your hands
are wet or damp or when you are standing on a wet or damp
surface or in water.
2. This fixture MUST ALWAYS BE USED in accordance with all
electrical and safety codes and ordinances, including the most
recent National Electric Code (NEC) and with the Occupational
Safety and Health Ace (OSHA) Volume 1 on General Industry
Standards and interpretations.
3. ONLY USE the UL Listed battery charger, or 12V DC plug
supplied with the fixture.
4. DO NOT replace batteries.
5. DO NOT work on this battery pack
Maintenance
Before performing any maintenance, ALWAYS unplug worklight. Remove dirt and grime as soon as
it accumulates. Use a soft, damp cloth and a mild soap, if needed. Be sure not to get the electrical
plug wet. NEVER submerge any part of the worklight in any solution to clean it. DO NOT USE
solvents such as gasoline, turpentine, etc. to clean unit. Aerosols and other chemicals may fog
the clear polycarbonate lens.
One Year Full Warranty on Worklight
If this product fails due to a defect in material or workmanship within one year from the date of
purchase, RETURN IT TO YOUR NEAREST SEARS STORE OR CRAFTSMAN OUTLET IN
THE UNITED STATES, and it will be replaced free of charge. This warranty applies for only
90 days from the date of purchase if this Craftsman Worklight is used for commercial or rental
purposes. This warranty gives you specific legal rights, and you may also have other rights,
which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
Assembly or operation questions? Call 1-800-334-6871
www.craftsman.com 9/2006
Contains nickel metal-hydride battery.
BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY
Printed in China
325-1584
LED Work Light
Model No. 73904
