Crane Infrared smartHEATER EE-8077W User manual

Infrared smartHEATER
MODEL # EE-8077W
PLEASE READ AND SAVE ALL INSTRUCTIONS TO ENSURE
THE SAFE AND EFFCTIVE USE OF THIS APPLIANCE.
If you have any questions about the operation of your
infrared heater, please contact Crane Customer Care.
Toll Free: 888-599-0992
Email: [email protected]
24/7 Chat: www.crane-usa.com or with the FREE Crane App

1
TABLE OF CONTENTS
Table of Contents
P. 1
Safety Instructions
P. 2-3
List of Main Parts
P. 4
Technical Specifications
P. 4
Assembly, Operation and Use
P. 4-5
Heater Settings
P. 6
Wi-Fi Setup
P. 7
Maintenance
P. 8
Customer Care
P. 9
Warranty
P. 10
For information about all CRANE products,
please visit http://www.crane-usa.com.

2
IMPORTANT SAFETY INSTRUCTIONS
Always follow basic safety precautions when using electrical products, especially when
children are present.
WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, ALWAYS MAKE SURE THE
PRODUCT IS UNPLUGGED FROM THE ELECTRICAL OUTLET BEFORE RELOCATING,
SERVICING, OR CLEANING IT.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
OUTLET SLOT AND FULLY INSERT.
WARNING! READ AND SAVE THESE INSTRUCTIONS. Failure to follow all of the
instructions listed below may result in electric shock, fire and/or serious personal injury.
1. This product is intended for indoor, non-commercial, household use for temporarily
heating residential rooms. Do not use the product for any other purpose.
2. Do not leave the product unattended while it is in use. Always unplug the product
from the electrical outlet when it is not in use.
3. Keep the product out of the reach of children and pets. This product is not intended
for use by children.
4. Place the product on a flat, steady, stable, heat-resistant surface.
5. This product has hot parts inside. Do not use it in areas where gasoline, paint, or
flammable liquids are used or stored, as there may be a risk of fire or explosion.
6. Use the product in a well-ventilated area. This heater is hot when in use. To avoid
burns, do not let bare skin touch a hot surface. Use handle when moving this heater.
Keep combustible materials, such as furniture, pillows, bedding, paper, clothes, and
curtains at least 3 feet (0.9 meters) from all sides of the heater.
7. Use this heater only as described in this manual. Any other use not recommended by
the manufacturer may cause fire, electric shock, or personal injury.
8. Do not insert or allow foreign objects to enter any opening on the heater as this may
cause an electric shock, fire, or product damage.
9. Do not use this product to dry or heat clothing, shoes, pipes, or any other item.
10. This heater is not intended for use in damp/wet locations.
11. Never locate heater where it may fall into a bathtub or other water container.
12. Do not move the product when it is heated. Allow the product to thoroughly cool
before handling it.
13. Plug the product into a standard 120V AC electrical outlet.
14. Do not allow the Power Cord to hang (e.g., over the edge of a table or counter) or
place/run the Power Cord under rugs, carpeting, or in high-traffic areas where it may
be tripped over or pulled.
15. To disconnect the product, turn the controls to the off position, then remove the plug
from the electrical outlet. Never pull on the Power Cord when disconnecting from
power outlet.
16. Do not put any stress on the Power Cord where it connects to the product, as the
Power Cord could fray and break.
17. Do not plug or unplug the product from the electrical outlet with wet hands.
18. Keep the Power Cord and product away from heated surfaces.
19. Do not operate any heater with a damaged cord or plug, after the heater
malfunctions, or has been dropped or damaged in any manner. Return the product to
a service facility for examination, electrical or mechanical adjustment, or repair.
To prevent a possible fire, do not block heat in any manner. In order to avoid
overheating, do not cover the heater. Never cover the top or bottom heat vents.
SAVE ALL INSTRUCTIONS!

3
GENERAL SAFETY INSTRUCTIONS
WARNING! Read and understand all instructions. Failure to follow all instructions
listed below may result in electric shock, fire or serious personal injury. The warnings,
cautions, and instructions discussed in this instruction manual cannot cover all possible
conditions and situations that may occur. It must be understood by the user that
common sense and caution are a factor which cannot be built into this product, but must
be supplied by the user.
SPECIAL INSTRUCTIONS
To avoid a circuit overload when using this product, do not operate another high-
wattage product on the same electrical circuit.
Avoid the use of an extension cord because the extension cord may overheat and
cause a risk of fire.
SAVE ALL INSTRUCTIONS!
CAUTION: A short Power Supply Cord is provided to reduce the risk of personal
injury resulting from becoming entangled in or tripping over a longer cord. Extension
cords are available from local hardware stores and may be used if care is exercised in
their use. If an extension cord is required, special care and caution is necessary. Also
the extension cord must be (1) marked with an electrical rating of 125 V and at least 13
A., 1625 W., and (2) the cord must be arranged so that it will not drape over the
countertop or tabletop where it can be pulled on by children or accidently tripped over.
ELECTRIC POWER
If the electric circuit is overloaded by other appliances, your heater and/or appliances
may not operate properly. The heater should be operated on a separate electrical circuit
from other operating appliances.
POLARIZED PLUG
This heater has a polarized plug (one blade is wider than the other).
As a safety feature to reduce the risk of electrical shock, this plug is
intended to fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to defeat this safety
feature.
SAFETY WARNING
Although this appliance is easy to operate, for your safety, the below warnings must be
followed:
1. Do not place the appliance near a heat source.
2. Never leave the appliance unattended while connected to the electrical outlet.
3. To avoid any accidental burns, never place hand on top vent or side when the
appliance is in operation.
4. Use the appliance on a stable surface away from water.
5. Do not unplug from the socket by pulling on the supply cord.
6. The appliance must be unplugged:
A. Before any cleaning
B. After use
C. If it appears to be faulty
THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY.

4
LIST OF MAIN PARTS
1. Power Button
2. Menu Button
3. LCD Display
4. Arrow Buttons
5. Heat Output Grate
6. Wheeled Feet
TECHNICAL SPECIFICATIONS
Maximum Power
1500 W
Heating Power Setting
750 W + 750 W
Voltage
120 VAC / 60Hz
ASSEMBLY, OPERATION AND USE
Attaching the Wheeled Feet
1. Before using the heater, attach the wheeled feet (included
separately) to the unit.
2. The wheeled feet attach to the base of the heater by sliding the peg
into the corresponding holes and snapping in place.
WARNING: Do NOT use this infrared heater if any part has been under
water. Immediately contact Crane Customer Care or a qualified electrician
to inspect or replace the heater if necessary. Keep plastic wrapping away
from children.
Placing & Operating the Heater
1. Place the heater on the floor in the desired location.
WARNING: Keep combustible materials –such as furniture, pillows,
bedding, papers, clothes and curtains —at least 3 feet from the front of
the heater. Also keep them away from the sides and rear.
1
2
3
4
5
6

5
2. Ensure that the heater’s power switch (on the back of the unit) is
switched to Power Off.
3. Plug the heater into a 120VAC outlet. This heater has a polarized
plug. As a safety feature to reduce the risk of electrical shock, this
plug is intended to fit in a wall outlet in one way. If the plug does
not fit fully in the outlet, contact a qualified electrician. Do not
attempt to defeat this safety feature.
4. Flip the Power Switch (on the back
of the unit) to Power On.
NOTE: Whenever the Power Switch is
On, the red indicator “Power Button”
light will remain illuminated.
5. Use the Power Button (on the top
of the unit) to start operating your
Infrared Heater. Upon first
powering your heater on, the LCD Display will read the current
room temperature.
6. Use the menu button to scroll through the settings options and the
arrow buttons to adjust the desired temperature.
Consult the “Heater Settings” section of the instruction manual
for a more detailed explanation of the settings.
Turning Off the Heater
1. Use the Power Button (on the top of the unit) to turn off your
Infrared Heater. The LDC Display will remain illuminated until the
unit has cooled (about two minutes), at which point it will turn off.
NOTE: Whenever the Power Switch is On, the red indicator “Power
Button” light will remain illuminated.
OVERHEAT PROTECTION
The heater has an internal, over-heating safety device which automatically switches the
heater off if an over-heat situation is detected. If this should occur, unplug the appliance
and wait until the unit cools off. Once the unit has fully cooled, ensure the air intake
vent on the back of the heater is free of dust and lint. Once you have verified this air
intake vent is clear, you can switch it on again.
To Reset the Heater
If your heater overheats for any reason, please do the following to reset.
1. Turn the unit off using the Power Switch (on the back of the unit)
2. Unplug the unit and wait 5-10 minutes.
3. Ensure that there is nothing obstructing the heater.
4. Plug the heater in and turn it on.

6
HEATER SETTINGS
Icon
Function
Desired Room Temperature Setting: While this icon is illuminated,
use the arrow buttons to set the Desired Room Temperature. Press
and hold the Up arrow to switch to C. The temperature range is from
45 F –85 F or 7 C –30 C .
Heat Power Setting: While this icon is illuminated, use the arrow
buttons to select the LO (750 W) or HI (1500 W) Heat Power Setting.
Timer Setting: While this icon is illuminated, use the arrow buttons to
use the Timer Setting to run the heater from 1 –12 hours. When using
this setting, the heater will power off after the number of hours you have
selected.
Anti-Freeze Setting: While this icon is illuminated, use the arrow
buttons to turn ON or turn OFF the Anti-Freeze Setting. This setting
keeps room temperature at/above 45 F to prevent freezing
temperature. While this setting is ON, the red “Power Button” light will
blink and the display will go dark.
NOTE: By setting the Anti-Freeze Setting, you will override any other
settings you have set.
Wi-Fi Setting: While this icon is illuminated, use the arrow buttons to
turn ON or turn OFF the Wi-Fi Setting for this item. See the “Wi-Fi
Setup” section of the instruction manual or the Wi-Fi Quickstart Sheet for
a more detailed explanation of the settings.
Child Lock Setting: While this icon is illuminated, use the arrow buttons
to turn ON or OFF the Child Lock Setting. When this setting is ON, none
of the other heater settings can be adjusted, including turning ON or OFF
the device. This setting can be changed while the device is OFF.
DIM
Adjust LCD Brightness: While the LCD Display shows DIM, use the
arrow buttons to Adjust LCD Brightness from 1 (most dim) to 4 (most
bright).

7
WIFI SETUP
FOR iPHONES:
Go to the App Store and download our FREE App: Search “Crane”
FOR ANDROIDS:
Go to Google Play and download our FREE App: Search “Crane”
CONNECTING YOUR DEVICE:
Open the Crane App.
You will be prompted to log in. If you have not already created a
user account, press CREATE NEW USER and enter your information.
Make sure your Crane device is plugged in and powered on.
From the home screen, select DEVICES ADD NEW DEVICE to
begin the tutorial.
Turn the device’s Wi-Fi on using the menu button on the device,
then press and hold the Up arrow for 3 seconds to access SET mode.
The display screen will begin blinking during set up.
On your phone, go to Wi-Fi Settings and select the “CRANEwifi”
network.
Return to the Crane App and enter all information prompted on the
Orange Setup Screen, then press SAVE AND RESTART when
finished. This will restart the Crane Device.
Press the HOME button at the bottom of your screen and then
select DEVICES. Your Crane Device should appear on the list!
FOR TROUBLESHOOTING, PLEASE REFER TO THE
FAQ SECTION FOR SMART DEVICES IN THE FREE
CRANE APP OR VISIT OUR WEBSITE.
www.crane-usa.com/customer-care/

8
MAINTENANCE
CAUTION:
Always be sure that the heater is switched OFF, unplugged and
completely cooled before cleaning or attempting to store the item.
Do not immerse heater in water or allow water to drip into the
interior of the heater, as this could create an electric shock
hazard.
Please Note: Regardless of the type of heating system setup, always
install and maintain at least one smoke detector in good working
condition on each floor of your home. Periodically check and/or replace
the battery in your smoke detector with a fresh battery.
CARE AND CLEANING
1. Always turn off the heater and disconnect the cord from the
electrical outlet before cleaning your heater.
2. Light accumulated dust may be removed from the heater with a
soft cloth or vacuum cleaner.
3. Ensure that the air intake vent on the back of the heater is free and
clear of dust or lint.
4. The removable particle filter should be cleaned and dried out at
least 1-2 times per season. Remove the magnetic air intake vent
cover and hand wash the particle filter with soap and water.
5. Clean the outside of the heater by wiping with a damp cloth and
buff with a dry cloth.
DO NOT use any detergents or abrasives and do not allow any
water to enter the heater.
DO NOT allow water to run into the interior of the heater as this
could create a fire or electric shock hazard.
STORING
Allow the appliance to cool completely before storing. Store the appliance
in a dry location. Do not place any heavy items on top of appliance during
storage as this may result in possible damage of appliance. Store the cord
in a clean, dry location away from metal objects. Always check the plug
before use to assure metal items have not become attached.

9
CUSTOMER CARE
If you have any questions with regard to the operation of this infrared
heater, please contact Crane Customer Care.
Crane USA, Inc.
621 IL Route 83, Suite 202
Bensenville, Illinois 60106
Toll Free: 1-888-599-0992 (Monday - Friday 9:00am - 4:00pm CST)
24/7 Chat: Visit our Website or Download the FREE Crane App
Email: [email protected]
Website: http://www.crane-usa.com
ENVIRONMENTAL PROTECTION
If the heater should no longer operate, please be sure to dispose of the
unit in an environmentally friendly way by taking it into a public collection
point. Please do not place broken heaters with your regular household
waste.

10
LIMITED WARRANTY
Thank you for purchasing a Crane product. This Infrared Heater was tested and
meets our stringent quality standards. This product is warrantied to be free from
manufacturing defects under normal use and conditions for 1 year.
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE. CONTACT US FOR
PROBLEMS AND QUESTIONS. WE CAN HELP.
If you experience unsatisfactory operation, first refer to the troubleshooting
section in the manual to ensure that it is not due to care or cleaning. Follow Care
and Cleaning Instructions from manual. You can also visit www.crane-
usa.com/customer-care/ Customer Care for information.
If you have any questions or comments, please Call Crane Customer Care, Toll
Free: 888-599-0992, Chat with us Live on our website, or Email questions@crane-
usa.com. Please specify the style and model number so our Customer Care
Department can assist you.
WARRANTY REQUIRES A DATED PROOF OF PURCHASE.
This warranty is void if the defect is due to accidental damage, misuse, abuse,
neglect, improper repair or alteration by unauthorized persons, or a failure to
follow operating instructions provided with the product. This warranty does not
apply to normal wear and tear or commercial use.
The warranty is non-transferable and applies only to the original purchaser and
does not extend to subsequent owners of the product. Liability under this
warranty is limited to repair or replacement. In no event shall liability exceed the
purchase price paid by the purchaser of the product. Under no circumstances shall
there be liability for any loss - direct, indirect or incidental –or consequential
damage arising out of, or in connection with the use of this product.
This warranty is valid only in the 48 contiguous states plus the District of
Columbia and excludes Puerto Rico and the Virgin Islands. This warranty is
effective only if the product is purchased and operated in the United States of
America.
This warranty gives you specific legal rights; however you may have other rights
that vary from state to state. Some states do not allow limitation on implied
warranties or exclusion of consequential damages; therefore these restrictions
may not apply to you.
Any instructions or warranty included in this manual may be subject to change
without notice. For the most up-to-date instructions and warranty information,
please contact us or visit our website.
To receive warranty instructions and return authorization, please contact Crane
Customer Care.
Crane USA, Inc.
621 Route 83, Ste 202, Bensenville, Illinois 60106
Toll Free: 1-888-599-0992 (Monday - Friday 9:00am - 4:00pm CST)
24/7 Chat: Visit our Website or Download the FREE Crane App
Email: [e-mail]
Website: http://www.crane-usa.com
CRANE WARRANTY

11