Create Room oh happy day DREAMBOX 2 User manual

oh happy day
YOU’VE RECEIVED THE PREBUILT DREAMBOX 2!
CUSTOMERSERVICECREATEROOM.COM
WWW.CREATEROOM.COM
USA  CANADA: 8012262686 MF 9AM5PM MST
UKEU: [phone] OR [phone]
You are minutes away from crafting heaven. Just a few simple steps and you’ll be ready to
move in. Should you need any assistance, our customer service team is the friendliest bunch
and would be delighted to help you!
We are excited for you to enjoy your inspiring new workspace and can’t wait to see pictures!
Share your photos on Facebook and Instagram and don’t forget to tag @createroomco.
Happy crafting!
0823B
Pre-Built DreamBox 2 Assembly Instructions
(Proprietary patented product and instructions. Do not copy or distribute.)

REVIEW SAFETY INSTRUCTIONS
BEFORE PROCEEDING
Dear Creator,
The safety of you and your loved ones is our number one priority. Please take a moment to review the following
safety instructions before you begin assembling your DreamBox. Failure to follow these procedures could
results in serious or fatal injuries.
• Keep kids and pets out of the building zone and away from the DreamBox until the box is filled and the Safety
Brackets have been attached to the wall.
• Keep the DreamBox in the Enclosed Shape (indicated in instructions) and the table closed during the assem-
bly and move in process.
• Add Stabilizers to Center Box and Side Boxes as indicated in the instructions to provide stability support.
Stabilizers can be removed, if desired, once the Safety Brackets have been attached to the wall.
• Be aware of weight distribution. Add heavy items to the bottom of the Center Box and Side Boxes first.
• Ensure all DreamBox wheels are in the forward facing position when stationary.
• Follow DreamBox table weight limit of 50 lbs.
• Do not add weight to the front of your Deluxe Crown.
• Use the included Safety Kit with Safety Brackets to properly attach the DreamBox to your wall.
Thank you for your attention. Please do not hesitate to reach out with any questions or concerns.
Sincerely,
The Create Room Team
[e-mail]
801-226-2686
Instruction Video
!

INCLUDED HARDWARE:
PARTS INCLUDED:
pre-built dreambox 2
LH
x1
Left Box
x1
Right Box
x2
Swing Door
x1
Center Box
x16
Connecting
Bolts
x1
Safety Kit
(includes safety
bracket and
screws)
x8
Acrylic Cups
(for metal rod)
x10
White Guards
x60
Metal Shelf Pegs
(CB, LB, RB Shelves)
x24
Metal Hooks
x20
Swing Door
Shelf Supports
x4
Metal Rods x32
5mm Hole Plug
x72
13mm Euro
Screws
x2
Door Handle
x4
“1 Screws
Full Set - x86
Half Set - x56
Tote Tracks
x12
Hinges
x2
Open Swing
Door Catch
(screws
included)
x4
Stabilizers
x2
Closed Swing
Door Catch
(screws included)
x1
Logo Plate
(2 screws
included)
x1
Light strip
x1
Light Plug

TOOLS YOU’LL NEED:
Medium Tote
Full Set - x24
Half Set - x12
Medium Tote Divider
Full Set - x24
Half Set - x12
Small Tote
Full Set - x14
Half Set - x14
Small Tote Divider
Full Set - x21
Half Set - x21
INVIEW TOTES:
Large Tote
Full Set - x34
Half Set - x17
PARTS INCLUDED:
x1
Logo Pocket Shelf
x2
Swing Door Shelves
for Metal Hooks
x8
Large Shelves
x2
Medium Shelves
x2
Left/Right Box
Upper Divider
x2
Left/Right Box Lower Divider
(L/R Box Lower Divider)
Phillips Screwdriver
(not included)
A Friend
(not included)
Our furniture is designed
to be built with two people.
Please do not try to build
alone.
Electric Drill with
socket extensions
or 10mm wrench.
(not included)
x1
Center Box Shelf
(CB Shelf)
(for under the table)
x7
Swing Door Shelves
x4
Small Shelves


Before lifting any wood components please remove all cardboard, totes, and other
items to reduce weight while lifting.

1
1
Remove ALL contents from Left & Right Boxes before attempting to lift. With two people,
carry the Left & Right Boxes by the ends into the room where you will be setting it up. Lay the
boxes on their backs on a soft surface, like a blanket or carpet, to protect the doors.
Right Box
Left Box
TIP:
Do not prop wood components against walls. Lay on a flat surface instead.

2
Carefully lift DreamBox center into desired room.
2
3Stand up Center Box. Leave table in upright position until build
is complete. Install 2 Stabilizers before moving on to next steps.
LH
CAUTION: This step requires two people. Weighs 160lbs/72.5kg.
x2
Stabilizers

3
L/R Box
Upper
Divider
L/R Box
Upper
Divider
Skip this step if you did not purchase the Short Divider Accessory Kit.
Use the 5 mm hole plugs to cover the 2 holes.
x2
5mm Hole Plugs
11
44

4
Install 12 hinges using 36 Euro Screws.
11
55
x12
Fixed
Hinges
x36
Euro Screws
Right Box
Left Box

5
6
Attach Left and Right side boxes to the Center Box using installed hinges and 18 euro screws.
x18
13mm Euro
Screws
Right Box
Center Box
Left Box

6
6
Install Tote Tracks, Door Handles, and Metal Shelf Pegs to corresponding holes.
x2
Door Handle
x4
“1 Screws
x12
Tote Tracks
x8
Metal Shelf Pegs
Right Box
Center Box
Left Box
77
12
6
3
6
9
12
15
18

7
5
Lower Divider:
(Suggested Peg Placement).
Left/Right Box Upper Divider:
(Suggested Tote Track placement).
x6
Tote Tracks
x4
Metal Shelf Pegs
Top
6
12
Install Tote Tracks into Upper Divider. Install tracks on the side WITHOUT the white cams.
Install Metal Shelf Pegs on Lower Divider. Install pegs on the side WITHOUT the white cams.
88
3
6
9
12
15
18
Finished Edge

8
LEFT SIDE SHOWN:
(Repeat steps for right side)
LH
9.1: Place 12 Connecting Bolts in the corresponding holes on both the Left and Right Boxes.
9.2: Install Upper and Lower dividers with the white cams facing away from the small tote section.
9.3: Install the 4remaining connecting bolts under LB and RB Shelf. Secure by locking 16 white cams.
x16
Connecting
Bolts
11
99
TIP:
1. If the Side Tables were purchased, place Lower Dividers on the outer most part of the box.
2. Line up the divider and box holes.
9.1 9.2 9.3

9
11
1010 Add Stabilizers to Side Boxes.
x2
Stabilizers
LHLH

10
LH
IMPORTANT:
Position DreamBox like the below graphic before installing crafting supplies to reduce tipping hazard.
DreamBox MUST remain in this enclosed position until the safety brackets are installed.
All wheels should be facing FORWARD, as shown below,
for maximum stability.

11
11
1010
LHLH
Attach swing doors using 18 Euro Screws.
LH
CAUTION: This step requires two people.
x18
13mm Euro Screws

12
Attach swing doors using 18 Euro Screws.
11
1111
LH
Install 2 sets of Door Catches. (There are no pre-drilled holes as
these are optional.) Install Light Kit.
x2
Open Swing
Door Catch
(screws
included)
x2
Closed Swing
Door Catch
(screws included)
Closed Swing
Door Catch
Open Swing
Door Magnet
LH
TIP:
1. Do not use Drill to avoid stripping.
2. Make sure the 4 pointed corners of the Open Swing Door Catch square are pressed against the side box.
Open Swing
Door Catch
Closed Swing
Door Catch
x1
Light strip
x1
Light Plug

13
!
11
1212
Determine the appropriate distance of the safety bracket from the wall. Secure the safety bracket in
place by tightening 4 Short Screws into the DreamBox. Locate the wall studs to find the optimal position
for attachment. Use Large Screws to securely fasten the DreamBox to the wall by anchoring them into
the wall studs. If wall studs cannot be found, utilize drywall screws instead and use long screws to attach
the DreamBox to the wall.
WARNING: Serious or fatal crushing injuries can occur from tipping furniture.
To prevent tip-over hazard, secure the DreamBox to the wall before use.
x4
Large Screws
(secure to wall)
x4
Drywall Screws
(if needed)
x4
Short Screws
(in lid or crown)
TIP:
Stabilizers can be removed, if desired, after
Safety Brackets have been attached.

14
11
1313 Skip this step if you did not purchase Deluxe Crown with Double Light
4.1: Insert Cams into Crown Base and Center Box Lid. Insert Double Ended Bolts into Crown base.
Tighten Cams
4.2: Connect Crown Base to Center Box Lid, and tighten Cams by turning until locked.
4.3: Insert Posts into Crown Sides and Crown Front. Insert Cams into Crown Sides.x4
Double
Ended Bolts
x22
Cams
Crown Base
13.1:
13.2:
13.3:
x18
Posts
Crown Base
Crown Front
Crown Side
Crown Side
Center Box Base
(already installed
on DreamBox)
Center Box Base
(already installed
on DreamBox)

15
11
1414
Skip this step if you did not purchase the crown.
Use a small ladder or step stool and attach Crown Front and Crown Sides to Crown Tops 1 and 2.
Tighten Cams.
Arrow