Creative Play S110 User manual

SINGLE SWING (FLAT SEAT)
Installation Instructions
REF: S110 - SINGLE SWING (FLAT SEAT)
pg 1 of 7

pg 2 of 7 REF: S110 - SINGLE SWING FLAT SEAT
PARTS required
x20 (FM80 ‘Brass screws’)x2 (COVERS)
x1 (SUPPORT BEAM)
x1 (FLAT SEAT inc chain)
S1
x4 (Uprights)
TOOLS required
x8 (small caps blue) x4 (nut caps M8)

pg 3 of 7 REF: S110 - SINGLE SWING FLAT SEAT
Foundation Details
550
150
Concrete
Timber support post
finished ground level
Soil
1680

pg 4 of 7 REF: S110 - SINGLE SWING FLAT SEAT
Surfacing Details
= SYNTHETIC
= LOOSE FILL

pg 5 of 7 REF: S110 - SINGLE SWING FLAT SEAT
Attach the TIMBERS S1 to the SUPPORT BEAM
Using 8x FM 80 ‘Brass Screws’ / 10x SMALL CAPS
Attach PLAYTEC COVER to the TIMBERS S1
Using 12x FM 80 ‘Brass Screws’
1
2
Installation Instructions
NOTES:
EACH SIDE
S1S1
EACH SIDE
:NOTES

pg 6 of 7 REF: S110 - SINGLE SWING FLAT SEAT
Install the assembly
Follow Fundation details
Install FLAT SEAT
Additional dimensions details
3
4
Installation Instructions
S1 S1
S1
S1

pg 7 of 7 REF: S110 - SINGLE SWING FLAT SEAT
Additional Dimensions
Min 350mm - Max 635mm
Recomended 500mm