Creative Play CH141 Instruction manual

MINI CLIMBING NET
Assembly + Installation Instructions
REF: CH141 - MINI CLIMBING NET
pg 1 of 6

x4 (M12 190 cup square hex)
x12 (M12 Nylocs)
x12 (End Caps)
x1 (Net Assembly)
PARTS required
REF: CH141 - MINI CLIMBING NET
pg 2 of 6
MCN1
MCN2
MCN3
x2 90mm x 90mm
(with end cap)
x2 90mm x 90mm
(with end cap & ANGLE CUT END)
x2 90mm x 90mm
(with end cap & HEX BOARD Slat)

TOOLS required
REF: CH141 - MINI CLIMBING NET
pg 3 of 6

Foundation Details
REF: CH141 - MINI CLIMBING NET
pg 4 of 6
SOIL (150mm)
TIMBER SUPPORT POST
CONCRETE

1
2
Assembly Instructions
REF: CH141 - MINI CLIMBING NET
pg 5 of 6
Attach the MCN3 timbers to the MCN1 timbers
Using M12 190 cup square hex bolts
Attach the NET ASSEMBLY
to the MCN2 timbers
Ensure the T3 has the HEX
BOARD slat attached
The top THREAD BAR (longer thread bar) attaches the
NET ASSEMBLY and MCN2 timbers
to the MCN1 and MCN3 ASSEMBLY
MCN1
MCN3
MCN3
MCN1
*Ensure the nylocs are covered using end caps
MCN2

Assembly Instructions
REF: CH141 - MINI CLIMBING NET
pg 6 of 6
3Ensure POSITIONING of the MCN2 timber is correct
Additional dimensions shown below
GL
Ground Level