Creative Play FS105 User manual

SIT UPS Fitness Station
Installation Instructions
REF: FS105 - SIT UPS Fitness Station
pg 1 of 8

x4 (M12 270* cup square hex)
x4 (M12 135* cup square hex)
x8 (M12 Nylocs)
PARTS required
REF: FS105 - SIT UPS Fitness Station
x2 (SLABBED 1 side)
x1 (HEX BOARD PIECES)
x8 (Covered end cap R60)
NOT STANDARD END CAP - has a
radius cut into it
FS5b
pg 2 of 8
x10 (FM80 ‘Brass screws’)
To be used for HEX BOARD pieces
x2 (SLABBED 1 side)
FS5c
x4 (120 Distance piece)
120 label is shown on the inside
x1 (STANDARD ‘FITNESS STATION’ Metal 1m BAR)
x2 (SLABBED 1 side)
FS5a

TOOLS required
REF: FS105 - SIT UPS Fitness Station
pg 3 of 8

Foundation Details
REF: FS105 - SIT UPS Fitness Station
TIMBER SUPPORT POST
CONCRETE
SOIL
FINISHED GROUND LEVEL
pg 4 of 8

Surfacing Details
REF: FS105 - SIT UPS Fitness Station
pg 5 of 8
= MINIMUM SPACE
= SURFACE AREA

1
2
Assembly Instructions
REF: FS105 - SIT UPS Fitness Station
Attach the FS5b timber to the FSa / FSc timbers
Using M12 270* cup square hex / NYLOCS / Covered end cap R60 / 120 distance pieces
Repeat for the remaining FS5a / FS5b / FS5c timbers
This ASSEMBLY will be a direct mirror - NOT THE SAME WAY
SLABBED / FLAT FACE
- TOP
NOTE:
The FLAT SIDE OF THE 120 distance piece sits
against the SLABBED / FLAT face of the FS5a
and FS5c timbers
pg 6 of 8
FS5a
FS5b
FS5b
FS5c
FS5a
FS5c

3
4
Assembly Instructions
REF: FS105 - SIT UPS Fitness Station
Attach the FS5b timber to the FSa / FSc timbers
Using M12 135* cup square hex / NYLOCS / Covered end cap R60
Attach the HEX BOARD piece
Using FM80 ‘BRASS SCREWS’
SOLID BLACK =
Flush FACES
pg 7 of 8
NOTE: Fitness Station
bars ALWAYS attach
to SLABBED FACE /
FLAT SIDE

Additional Drawings
REF: FS105 - SIT UPS Fitness Station
pg 8 of 8
1.14m
1.38m 1.23m