Creative Play PULL-UPS User manual

PULL-UPS Fitness Station
Installation Instructions
REF: FS107 - PULL UPS Fitness Station
pg 1 of 8

x4 (M12 135* cup square hex)
x12 (M12 125* cup square hex)
x16 (M12 Nylocs)
x12 (End Caps)
PARTS required
REF: FS107 - PULL UPS Fitness Station
x1 (SLABBED 1 side)
x4 (STANDARD ‘FITNESS STATION’ Metal 1m BAR)
x2 (SLABBED both sides) x1 (SLABBED both sides)
x1 (SLABBED 1 side)
x4 (Covered end cap R60)
NOT STANDARD END CAP - has a
radius cut into it
FS7a FS7b FS7c
FS7d
pg 2 of 8
FS7a FS7b FS7b
FS7c FS7d

TOOLS required
REF: FS107 - PULL UPS Fitness Station
pg 3 of 8

Foundation Details
REF: FS107 - PULL UPS Fitness Station
TIMBER SUPPORT POST
CONCRETE
SOIL
FINISHED GROUND LEVEL
pg 4 of 8

Surfacing Details
REF: FS107 - PULL UPS Fitness Station
pg 5 of 8
= MINIMUM SPACE
= SURFACE AREA

1
Assembly Instructions
REF: FS107 - PULL UPS Fitness Station
Attach the Fitness station bars to the FS7a / b / c / d timbers
Using M12 135* & 125* cup square hex / NYLOCS / Covered end cap R60 / Covered end cap (standard)
M12 x 135mm CUP
SQUARE and COVERED
END R60
NOT STANDARD END CAP -
has a radius cut into it
M12 x 125mm CUP
SQUARE and COVERED
END
M12 x 125mm CUP
SQUARE and COVERED
END
pg 6 of 8
FITNESS STATION 1m BAR
FS7a

2Ensure the correct bolts & end caps are used
Using M12 135* & 125* cup square hex / NYLOCS / Covered end cap R60 / Covered end cap (standard)
MARKED RED BELOW
MARKED BLACK ABOVE
M12 x 135mm CUP
SQUARE and COVERED
END R60
NOT STANDARD END CAP -
has a radius cut into it
M12 x 125mm CUP
SQUARE and COVERED
END
Assembly Instructions
REF: FS107 - PULL UPS Fitness Station
pg 7 of 8

2.28m
4.55m
2.2m 1.8m 2.2m
1.0m
Additional Drawings
REF: FS107 - PULL UPS Fitness Station
pg 8 of 8
GL
Ground Level