Creative DSL 7410 User manual

Installation Guide
Creative DSL USB 7410
RFC1483
Page 1 of 40
Table of Contents
1. INTRODUCTION............................................................................................................................................... 3
1.1. MINIMUM SYSTEM REQUIREMENTS...............................................................................................................3
1.2. HARDWARE INSTALLATION ........................................................................................................................... 4
Jacks on your Creative DSL 7410......................................................................................................................... 4
Indicator LEDs...................................................................................................................................................... 5
Hardware Installation........................................................................................................................................... 6
1.3. INSTALLATION CD-ROM ..............................................................................................................................7
1.4. BEFORE INSTALLATION.................................................................................................................................. 7
2. INSTALLATION IN WINDOWS 98................................................................................................................9
2.1. INSTALLING THE DSL 7410 DEVICE DRIVER................................................................................................. 9
2.2. SETTING UP THE DSL NETWORK CONNECTION (OPTIONAL)........................................................................17
2.3. UNINSTALLING THE DSL 7410 .................................................................................................................... 22
3. APPENDIX........................................................................................................................................................25
3.1. APPENDIX A – DSL STATUS ICON............................................................................................................... 25
3.2. APPENDIX B - TROUBLESHOOTING ..............................................................................................................27
4. FCC REGISTRATION INFORMATION FOR USERS...............................................................................29
5. CONTACT INFORMATION..........................................................................................................................31
6. WARRANTY INFORMATION......................................................................................................................33
7. REGISTRATION CARD................................................................................................................................. 35

Installation Guide
Creative DSL USB 7410
RFC1483
Page 2 of 40

Installation Guide
Creative DSL USB 7410
RFC1483
Page 3 of 40
1. INTRODUCTION
Creative DSL USB 7410 is developed to bring modem users into the digital era by
providing high-speed Internet connections using their current phone lines. An interface
via USB connection and extremely simple hardware installation allows Creative DSL
7410 users to quickly setup and configure their DSL network.
This user’s guide provides information on how to setup and configure the Creative DSL
USB 7410 in Windows 98. Before starting the device driver installation, it is essential
that you carefully review the following sections:
1.1 Minimum System Requirements
1.2 Hardware Installation
1.3 Installation CD-ROM
1.4 Before Installation
1.1. Minimum System Requirements
The Creative DSL USB 7410 requires the following system:
•Pentium II 233 or higher IBM compatible PC
•Windows 98 Operating System
•32MB of RAM
•20MB free hard disk space
•One available USB port
•CD-ROM drive for DSL 7410 driver installation
•Subscribed service with a DSL service provider
•One RJ-11 phone cable: connects DSL 7410 to a DSL service-ready phone line
(supplied with package)
•Optional: User may also need access to the Windows 98 installation CD-ROM.

Installation Guide
Creative DSL USB 7410
RFC1483
Page 4 of 40
1.2. Hardware Installation
This section provides information about the components of your Creative DSL 7410 as
well as the hardware installation. It includes the following:
•Jacks on your Creative DSL 7410
•Indicator LEDs
•Hardware Installation
Jacks on your Creative DSL 7410
Located at the rear panel of your Creative DSL 7410 (see illustration below) are several
connectors which allow you to attach the PC and telephone set to your DSL 7410.
LINE jack
Using the provided phone cable, connect your telephone line from the wall jack to the
line jack, located at the rear of your DSL 7410.
PHONE jack
The phone jack (PHONE) allows you to connect a phone set to your Creative DSL 7410.
USB jack
The USB connector allows you to connect your DSL 7410 to a PC while the system is
still on.
PHONE jack
(
to a tele
p
hone set
)
LINE jack
(
to a tele
p
hone line
)
USB jack
(to your PC USB port)
The rear view of your Creative DSL 7410
PHONE jack
(
to a tele
p
hone set
)
LINE jack
(
to a tele
p
hone line
)
USB jack
(to your PC USB port)
The rear view of your Creative DSL 7410

Installation Guide
Creative DSL USB 7410
RFC1483
Page 5 of 40
Indicator LEDs
Your Creative DSL 7410 features Indicator LEDs which provide your DSL line
connection status. Refer to the following illustration and table for the definition of each
LED.
LED Descriptions
POWER On when your DSL 7410 is connected to a power source.
HS Flashing when trying to establish a connection to the
DSL service provider.
LINK On once DSL line is connected and your DSL 7410 is
ready.
The front view of your DSL 7410

Installation Guide
Creative DSL USB 7410
RFC1483
Page 6 of 40
Hardware Installation
Simply connect your Creative DSL 7410 (to the devices shown) as follows.
*Your DSL 7410 is required to be connected with a DSL
service subscribed line.*
From PHONE jack
to a tele
p
hone set
From LINE jack
to a DSL service
subscribed
telephone line
From your DSL
7410 USB jack to
your PC USB
port

Installation Guide
Creative DSL USB 7410
RFC1483
Page 7 of 40
1.3. Installation CD-ROM
Your Creative DSL USB 7410 comes with an installation CD-ROM. Make sure you
have this CD with you when you are ready to install the driver. The device driver for
your Creative DSL 7410 can be found under the folder named Driver.
1.4. Before Installation
Before starting the DSL device driver installation, it is very import to ensure that all the
followings are in place:
•Subscription to a DSL service provider.
•Obtain all necessary networks setting values, such as VPI and VCI values,
from your DSL service provider.
•Connect your DSL 7410 to a DSL service-ready phone line.

Installation Guide
Creative DSL USB 7410
RFC1483
Page 8 of 40

Installation Guide
Creative DSL USB 7410
RFC1483
Page 9 of 40
2. INSTALLATION IN WINDOWS 98
This section provides you with instructions on how to install the device driver of your
Creative DSL USB 7410. It is organized as follows:
2.1 Installing the DSL 7410 Device Driver
2.2 Setting up the DSL Network Connection (optional)
2.3 Uninstalling the DSL 7410
2.1. Installing the DSL 7410 Device Driver
While your PC is on, connect the Creative DSL USB 7410 to the PC via the USB
connector. The Windows 98 Plug-and-Play will automatically detect your Creative DSL
7410 as a new device and start an installation dialog box similar to the one shown below.
Click on Next to continue.

Installation Guide
Creative DSL USB 7410
RFC1483
Page 10 of 40
A dialog box similar to the one shown below appears.
Select ‘Search for the best driver for your device. (Recommended)’ and click on Next to
continue.