Crenova V60PLUS User manual

SIMPLE OPERATING INSTRUCTIONS
Vacuum Sealer
Crenova V60PLUS Vacuum Sealer User Guide
How to close the lid?
Press hard on two sides of the lid.
How to open the lid?
Press the Lid Lock Release Button
on both sides to open the lid.

1
1.Place bag material under the rail bar.
2. Slide the built-in trimmer to cut enough
bag material.
3. Place one end of bag material into
vacuum channel (across sealing strip).
4. Close the lid;
5. When the indicator light of Single Seal
is off, open the lid.
Press Single Seal Button to seal.
1
2
Make a Vacuum Bag
Single Seal
1
2
3
4
5

Note:the default setting is Dry Food Mode
Vacuum Seal
&Cancel
Vacuum Seal
&Cancel
FOOD
Blue
Dry
Red
Wet
FOOD
Blue
Dry
Red
Wet
1
2
Vacuum Seal Your Food
For Dry Food
2. Press the Vacuum Seal & Cancel Button,
to vacuum seal the food.
(Press again to cancel the vacuum
sealing process.)
with blue indicator light.
1. Place open end of bag into vacuum
channel.
3. When the indicator light of VacuumSeal &
Cancel Button is off, open the lid.
1. Place open end of bag into vacuum
channel.
2. Press the Food Button until the red
indicator light is on.
Press the Vacuum Seal & Cancel
Button to vacuum seal the food.
(Press again to cancel the vacuum sealing
process.)
3. When the indicator light of Vacuum Seal &
Cancel Button is off, open the lid.
For Juicy Food
2
1
2
3
1
2
3

Vacuum Seal
&Cancel
Manual
Vacuum
Single seal
3
For Soft Food and Crisp Food
For Soft Food
2. Press the Mode Button, and the red
indicator light is on.
Press the Vacuum Seal & Cancel Button
to vacuum seal the food.
(Press the button again to cancel the
vacuum sealing process.)
1. Place your food in bag, place open end
of bag into vacuum channel.
3. When the indicator light of VacuumSeal &
Cancel Button is off, open the lid.
1
2
For Crisp Food
2. Press and hold the Manual Vacuum
Button to vacuum the food, release the
button to stop vacuuming process.
1. Place open end of bag into vacuum
channel.
3. Press the Seal Button to seal the bag.
1
2
3
1
2
3
MODE
Blue
Red
Soft

Vacuum Seal
&Cancel
4
Vacuum Seal with Accessories
1. Connect the vacuum container to your vacuum sealer
using a vacuum hose.
3.
Then remove the hose from vacuum sealer.
Remove hose from vacuum container first.
2.Press the Vacuum Seal & Cancel Button to start vacuum
process, the vacuuming process is done after the
indicator light is off.
1
2
1
2
1
2
3