Crestron MK-IM-RX User manual

Crestron MK-IM-RX
Pole Mount Kit for iMedia Receivers
Installation Guide

This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2006 Crestron Electronics, Inc.

Crestron MK-IM-RX Pole Mount Kit for iMedia Receivers
Contents
Pole Mount Kit for iMedia Receivers: MK-IM-RX 1
Introduction ...............................................................................................................................1
Features and Functions................................................................................................1
Physical Description....................................................................................................1
Assembly to the iMedia Receiver..............................................................................................3
Problem Solving ........................................................................................................................9
Further Inquiries ..........................................................................................................9
Future Updates ............................................................................................................ 9
Return and Warranty Policies ..................................................................................................10
Merchandise Returns / Repair Service ...................................................................... 10
CRESTRON Limited Warranty.................................................................................10
Installation Guide – DOC. 6451 Contents •i

Crestron MK-IM-RX Pole Mount Kit for iMedia Receivers
Pole Mount Kit for iMedia
Receivers: MK-IM-RX
Introduction
Features and Functions
• Pole mounting kit for iMedia receivers
• Mounts any steel pole with 1.5 to 2.0 inch outer diameter
• Top or side mount to any iMedia receiver
Supplied Components
DESCRIPTION PART NUMBER QTY
Metal Bracket, Mounting, Top 2009784 1
Metal Bracket, Mounting, Bottom 2009785 1
¼”-20 Screw, 1.5"L, Stainless Steel, Socket,
Black
2009932 2
#6-32 Screw, 1.25"L, Stainless Steel, Pan Phil,
Black
2009913 4
Washer, Flat, Steel, B Narrow 0.500” OD, 0.281”
ID, 0.063” TH, Black
2009915 2
#6 Spacer, 7/8”L, Round, .250”OD, Black 2009911 4
Metal Plate, Pole Mount 2014343 1
Physical Description
The MK-IM-RX is a steel mounting kit that allows iMedia receivers to be attached to
a pole that holds a projector. The kit can attach to the top or side of the receiver as
shown in the following diagrams.
Installation Guide – DOC. 6451 Pole Mount Kit for iMedia Receivers: MK-IM-RX •1

Pole Mount Kit for iMedia Receivers Crestron MK-IM-RX
Top-Mounted iMedia Receiver
Side-Mounted iMedia Receiver
2 •Pole Mount Kit for iMedia Receivers: MK-IM-RX Installation Guide – DOC. 6451

Crestron MK-IM-RX Pole Mount Kit for iMedia Receivers
Assembly to the iMedia Receiver
The MK-IM-RX can be assembled and mounted to either the top or the side of an
iMedia receiver. Choose the appropriate mounting style for your application.
Required Tools #1 Phillips screwdriver
¼” Allen wrench
Top Mount NOTE: When installing, observe all local safety codes.
To mount the MK-IM-RX to the top of an iMedia receiver, perform the following:
1. Locate the mounting holes in the top cover of the iMedia receiver.
Top Cover Mounting Holes
FRONT
REAR
MOUNTING HOLES
Installation Guide – DOC. 6451 Pole Mount Kit for iMedia Receivers: MK-IM-RX •3

Pole Mount Kit for iMedia Receivers Crestron MK-IM-RX
2. Attach the bottom bracket of the MK-IM-RX to the iMedia receiver’s
mounting holes using the four #6-32 screws and spacers provided. The
mounting holes have PEM nuts to hold the screws.
Attaching Bottom Bracket to Mounting Holes
#6-32 SCREW
BOTTOM
BRACKET
#6 SPACER
PEM NUTS
iMEDIA
RECEIVER
3. Secure the assembly to the customer-supplied pole by using the top
bracket and the two ¼”-20 screws and washers provided.
Securing Assembly to Pole
iMEDIA
RECEIVER
BOTTOM
BRACKET
TOP
BRACKET
WASHER
1/4-20 SCREW
CUSTOMER
SUPPLIED
POLE
NOTE: An Allen wrench is required to tighten the ¼”-20 screws.
4 •Pole Mount Kit for iMedia Receivers: MK-IM-RX Installation Guide – DOC. 6451

Crestron MK-IM-RX Pole Mount Kit for iMedia Receivers
4. Connect iMedia transmitters and display devices to the mounted iMedia
receiver.
Top-Mounted iMedia Receiver
Installation Guide – DOC. 6451 Pole Mount Kit for iMedia Receivers: MK-IM-RX •5

Pole Mount Kit for iMedia Receivers Crestron MK-IM-RX
Side Mount NOTE: When installing, observe all local safety codes.
The MK-IM-RX attaches to the iMedia receiver in a side-mount application with
the included mounting plate. To mount the MK-IM-RX to the side of an iMedia
receiver, perform the following:
1. Remove all of the cover screws from the side of the iMedia receiver.
Remove Cover Screws
2. Attach the mounting plate of the MK-IM-RX (with the integrated PEM
nuts facing the receiver) to the side of the iMedia receiver’s mounting
holes using four of the screws removed from the previous step. Tighten the
outer screws prior to tightening the inner screws.
Attach Mounting Plate
MOUNTING PLATE
6 •Pole Mount Kit for iMedia Receivers: MK-IM-RX Installation Guide – DOC. 6451