Crestron TSW-1070-RMB-4 User manual

The TSW-1070-RMB-4 is a retrofit mounting bracket for TSW-1070 and
TSS-1070 series touch screens. The TSW-1070-RMB-4 is used to replace
an existing TSW-1060 or TSS-10 series touch screen that is installed
over a TSW-760/1060-MSMKmultisurface mount kit. The
TSW-1070-RMB-4 comes in white or black variants to match the touch
screen color.
In the Box
1 TSW-1070-RMB-4, Retrofit Mounting Bracket
Additional Items
4 Screw, 6-32 x 1/2in., Phillips (2007241)
4 Screw, 6-32 x 3/4in., Phillips (2033247)
TSW-1070-RMB-4-B Only
1 Bracket, Adapter, Black (2058873)
TSW-1070-RMB-4-W Only
1 Bracket, Adapter, White (2058872)
Install the Mounting Bracket
To install the TSW-1070-RMB-4 mounting bracket into an existing
TSW-760/1060-MSMKinstallation:
1. Pull the TSW-1060 or TSS-10 out of its mounting bracket and
disconnect all cables from the rear of the touch screen.
NOTE:If the touch screen is secured to the mounting bracket
with a security latch, refer to the removal procedure described
in the TSW-560, TSW-760, and TSW-1070 Quick Start or the
TSS-7 and TSS-10 Quick Start.
2. Remove the TSW-760/1060 mounting bracket from the
TSW-760/1060-MSMK.
3. Position the TSW-1070-RMB-4 mounting bracket so that the four
screw openings in the mounting bracket align with the four raised
notches on the TSW-760/1060-MSMK as shown in the following
image.
TSW-1070-RMB-4 QuickStart
Retrofit Mounting Bracket for TSW-1070 Series
1

4. Use the four 6-32x1/2in. screws to attach the TSW-770/1070
mounting bracket (provided with the touch screen) and the
TSW-1070-RMB-4 mounting bracket to the TSW-760/1060-MSMK
as shown in the following image. Check that the mounting brackets
are level after installation.
If installing a TSW-1070-LB light bar as part of the MSMK
installation, the light bar must be placed between the
TSW-770/1070 mounting bracket and the TSW-1070-RMB-4
mounting bracket during this stage of the installation. The four
6-32x3/4in. screws must also be used in place of the 6-32x1/2in.
screws. Refer to the following image.
NOTE:For more information on installing the light bar, refer
to the TSW-770-LBand TSW-1070-LBQuick Start.
2
TSW-1070-RMB-4 QuickStart
Retrofit Mounting Bracket for TSW-1070 Series

5. Connect all cables to the appropriate ports on the touch screen.
6. Push the touch screen into its mounting bracket.
NOTE:For more information on installing the touch screen,
refer to the TSW-70 Series Product Manual or the TSS-70
Series Product Manual.
Visit the Product Page
Scan the QR code to visit the product page.
TSW-1070-RMB-4
www.crestron.com/model/6512657
Additional Information
Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) under a limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software is
licensed to Crestron dealers, CSPs, and end-users under a separate End-User License
Agreement. Both of these Agreements can be found on the Crestron website at
www.crestron.com/legal/software_license_agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit
www.crestron.com/opensource.
Crestron and the Crestron logo are either trademarks or registered trademarks of
Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks,
registered trademarks, and trade names may be used in this document to refer to either
the entities claiming the marks and names or their products. Crestron disclaims any
proprietary interest in the marks and names of others. Crestron is not responsible for
errors in typography or photography.
©2022 Crestron Electronics, Inc.
Doc. 9218A
02/14/22
3
TSW-1070-RMB-4 QuickStart
Retrofit Mounting Bracket for TSW-1070 Series