Crestron HD-MD-400-C-E Owner's manual

HD-MD-400-C-E
HD Scaling Auto-Switcher & Extender 400
crestron.com |800.237.2041
>3x1+1 high-definition digital AV switcher, scaler, and extender
>Fully-automatic operation — no control system, control panel,
or programming required!
>Easy Web browser setup
>Integrates with Crestron Fusion®via the CEN-AVF-HUB [9]
>Supports integration with a Crestron®control system for fully
programmable functionality
>Includes a compact transmitter and receiver
>Transmitter includes two HDMI®, one VGA, and one analog
audio inputs [2,3,4]
>Receiver includes one HDMI input, one HDMI output, and one
analog audio output [2,5,6]
>A single CATx cable links the transmitter to the receiver [1]
>Supports cable lengths up to 230 feet (70 meters) between the
transmitter and receiver [1]
>Automatically scales input signals to match the native resolution
of the room display
>Supports a range of display resolutions up to Full HD 1080p
and WUXGA
>Supports any input resolution up to Full HD 1080p and WUXGA [10]
>Performs deinterlacing of NTSC, PAL, and 1080i sources
>Handles Dolby Digital®5.1, DTS®5.1, and uncompressed 7.1 linear
PCM audio
>Allows stereo audio extraction [6]
>Provides up to 150 ms lip-sync audio delay
>QuickSwitch HD™technology manages HDCP keys for fast,
reliable switching
>Includes comprehensive built-in EDID configuration tools
>Provides a 10/100 Ethernet LAN connection
>Enables device control via CEC and RS-232 [8]
>Compact, low-profile surface mount design
>Universal 100-240V external power pack included [12]
The Crestron®HD-MD-400-C-E delivers an incredibly simple and cost-
effective multimedia presentation solution for classrooms and meeting
spaces. It allows a laptop or mobile device to be connected to one of three
inputs at a table or podium, and routes the signal to a display or projector
up to 230 feet (70 meters) away. An additional AV source can be connected
at the display device location or through an optional wall plate. Fully
automatic operation detects when a source is connected or disconnected
at any input and turns the display on and off, alleviating the need for any
control panels or remotes. Built-in scaling ensures an optimal video image
for SD and HD video signals, as well as for high-res computer signals.
Composed of a compact transmitter and receiver pair, the HD-MD-400-C-E
installs in minutes and requires no special programming. The transmitter
mounts beneath the table or inside the podium, while the receiver mounts
behind the display or above the projector. The only connection required
between the transmitter and receiver is a single CAT type twisted pair
cable.[1] A LAN port on the receiver allows for connection to an Ethernet
network to enable easy setup and configuration via a Web browser.
Advanced functionality is enabled through integration with a Crestron
control system.
Multimedia Computer/AV Auto-Switcher
The HD-MD-400-C-E handles high-definition video and computer sources
with resolutions up to Full HD 1080p60, 1080i30, or WUXGA 1920x1200.
Two HDMI®inputs, one VGA input, and one analog audio input are provided
on the transmitter to support the connection of computers, mobile devices,
and other media sources. An additional HDMI input is provided on the
receiver, which may be wired to an optional wall plate or used to connect
a Crestron AirMedia®wireless presentation gateway or other multimedia
source installed permanently at the display device.
The inputs on each component can be configured to switch automatically
or be controlled through a Crestron control system. Auto-detection on
each input enables plug-and-play simplicity, supporting HDMI, DVI, or
Dual-Mode DisplayPort signals via any HDMI input, and VGA, RGB, or
component video via the VGA input.[2,3] The analog audio input works in
tandem with the VGA input.[4]

HD-MD-400-C-E HD Scaling Auto-Switcher & Extender 400
crestron.com |800.237.2041
A single HDMI output if provided on the receiver to feed the display device.
This output can support either HDMI or DVI signal types.[5] A stereo analog
audio output is also included to feed an optional sound bar or amplifier.[6]
HD Signal Extender
A single CAT type cable (sold separately) links the HD-MD-400-C-E
transmitter and receiver together. This cable can be up to 230 feet
(70 meters) in length, offering an ideal signal extender solution for virtually
any room with a single table or podium and one display device.[1]
HD Scaler
One might assume that any modern display device should support
whatever sources you connect to it. In fact, many displays just can’t
handle all the different formats and resolutions you’re likely to encounter
day-to-day in a dynamic presentation environment. With its built-in
professional scaler, the HD-MD-400-C-E enables support for a complete
range of digital and analog signals, ensuring that every source displays
reliably and beautifully. Automatic calibration is achieved using the
display’s EDID [7] — just connect the receiver to the display and it
intelligently converts and enhances the signal for optimal appearance on
the display screen.
EDID Format Management
To ensure that every source gets displayed at its optimal resolution and
format, the HD-MD-400-C-E provides comprehensive management of
the EDID information that passes between the display, scaler, and source
devices. Most applications require no changes to the default settings. For
applications requiring custom configuration, the HD-MD-400-C-E allows
for easy assessment of each device’s format and resolution capabilities,
with the ability to configure signals appropriately for the most desirable
and predictable behavior.
QuickSwitch HD™Technology
Handling digital media signals means handling HDCP (High-bandwidth
Digital Content Protection), the encryption scheme used by content
providers to protect their DVDs, Blu-ray™discs, and broadcast signals
against unauthorized copying. Viewing HDCP encrypted content requires a
source device to “authenticate” each display and signal processor in the
system and issue it a “key” before delivering an output signal. Crestron
QuickSwitch HD manages these keys to ensure fast, reliable switching and
immunity to “blackouts.”
Audio Extracting
Its analog audio output allows the HD-MD-400-C-E to extract the stereo
audio signal from digital sources to feed a sound bar, amplified speakers,
or a separate sound system.[6]
Embedded Device Control
To deliver fully automatic operation of the complete system, the
HD-MD-400-C-E can turn the display device on and off via its HDMI
connection using CEC (Consumer Electronics Control) commands, or via
the built-in RS-232 port.[8] For advanced applications using a Crestron
control system, all of the HD-MD-400-C-E’s HDMI and RS-232 ports can
be utilized to attain fully-programmable control of the display, sources, and
other devices in the room.
HD-MD-400-C-E Transmitter – Top, Front, and Bottom Views
HD-MD-400-C-E Receiver – Top, Front, and Bottom Views

HD-MD-400-C-E HD Scaling Auto-Switcher & Extender 400
crestron.com |800.237.2041
Enterprise Management Option
The optional .AV Framework™Hub (CEN-AVF-HUB [9]) can be added
to enable centralized monitoring using Crestron Fusion®Enterprise
Management Software. A single “AVF Hub” can support up to 15
HD-MD-400-C-Es connected over an Ethernet LAN. Refer to the
CEN-AVF-HUB spec sheet for additional information.
Control System Integration
Fully programmable functionality can be enabled through integration with
a Crestron control system.
Low-Profile Installation
The transmitter and receiver components are each designed to be
mounted to a flat surface or placed on a shelf. Each component is compact
enough to fit discreetly inside a presentation lectern, beneath a table, on
a wall behind a flat-panel display, or on the ceiling above a projector. They
can even be attached to a single rack rail in the back of an equipment
cabinet. Both components are powered together using a single wall mount
power pack (included), which may be connected either at the receiver or
at the transmitter location. Power is carried between the transmitter and
receiver over the signal extension link connection.
Easy Setup
Simplified setup, configuration, and basic operation is provided through a
Web browser user interface. Essential controls and status indicators are
also provided on each unit for easy testing and troubleshooting without a
computer during installation.
SPECIFICATIONS
Video
Switcher: 3x1+1 (3 inputs at transmitter + 1 input at receiver) auto-
switching, auto-detecting multi-format digital/analog inputs; Crestron
QuickSwitch HD™technology
Scaler: HD video scaler and deinterlacer, noise reduction, 3:2/2:2 pull-
down detection and recovery, aspect ratio selection, VGA phase/clock &
H/V position adjustments, picture and RGB color adjustments
Input Signal Types: HDMI®w/Deep Color (DVI & Dual-Mode DisplayPort
compatible [2]); VGA/RGB (RGBHV, RGBS, RGsB); component (YPbPr) [3]
Output Signal Types: HDMI w/Deep Color (DVI compatible [5])
Input Resolutions, HDMI, Progressive: 640x480@60/72/75/85Hz,
720x480@60Hz (480p), 720x576@50Hz (576p),
800x600@56/60/72/75/85Hz, 848x480@60Hz, 852x480@60Hz,
854x480@60Hz, 1024x768@60/70/75/85Hz, 1024x852@60Hz,
1024x1024@60Hz, 1280x720@50/60Hz (720p50/60), 1280x768@60Hz,
1280x800@60Hz, 1280x960@60Hz, 1280x1024@60/75/85Hz,
1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz,
1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz [12],
1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24/25/50/60Hz
(1080p24/25/50/60), 1920x1200@60Hz [12], plus any other resolution up to
165MHz pixel clock
Input Resolutions, HDMI, Interlaced: 720x480@30Hz (480i),
720x576@25Hz (576i), 1920x1080@25/30Hz (1080i25/30), plus any other
resolution up to 165MHz pixel clock
Input Resolutions, RGB/VGA, Progressive: 640x480@60/72/75/85Hz,
720x480@60Hz (480p), 720x576@50Hz (576p),
800x600@56/60/72/75/85Hz, 848x480@60Hz, 1024x768@60/70/75/85Hz,
1280x720@50/60Hz (720p50/60), 1280x768@60Hz, 1280x800@60Hz,
1280x960@60Hz, 1280x1024@60/75/85Hz, 1360x768@60Hz,
1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz,
1680x1050@50/60Hz, 1920x1080@50/60Hz (1080p50/60),
1920x1200@60Hz [12], plus any other resolution up to 165MHz pixel clock
Input Resolutions, Component, Progressive: 480p, 576p, 720p50,
720p60, 1080p24, 1080p30, 1080p50 (1125 lines), 1080p60
Input Resolutions, Component, Interlaced: 480i, 576i, 1080i25 (1125
lines), 1080i30
Scaler Output Resolutions, HDMI, Progressive: 640x480@60Hz,
720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz,
840x480@60Hz, 1024x768@60Hz, 1280x720@50/60Hz (720p50/60),
1280x768@60Hz [11], 1280x800@60Hz [11], 1280x960@60Hz,
1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz [11],
1400x1050@60Hz [11], 1440x900@60Hz [11], 1600x900@60Hz [12],
1600x1200@60Hz, 1680x1050@60Hz [11], 1920x1080@24/50/60Hz
(1080p24/50/60), 1920x1200@60Hz [12]
Scaler Output Resolutions, HDMI, Interlaced: 480i, 576i, 1080i25,
1080i30
Audio
Switcher: 3x1+1 (3 inputs at transmitter + 1 input at receiver)
auto-switching
Input Signal Types: HDMI (Dual-Mode DisplayPort compatible),
analog stereo
Output Signal Types: HDMI, analog stereo [6]
Digital Formats: Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES,
DTS 96/24, LPCM up to 8 channels
Analog Formats: Stereo 2-channel [6]
Analog-To-Digital Conversion: 24-bit 48 kHz
Digital-To-Analog Conversion: 24-bit 48 kHz
Lip-Sync Delay: 0 to 150 ms (maximum delay time is reduced for input
signals with sampling rates over 48 kHz)
Analog Output Volume: -80 to +20 dB Level adjustment range, plus Mute
Analog Performance: Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
S/N Ratio: >93 dB, 20 Hz to 20 kHz A-weighted;
THD+N: <0.005% @ 1 kHz;
Stereo Separation: >80 dB
Communications
Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery,
full/half duplex, DHCP, Web browser setup and control, Crestron control
system integration
USB: USB Host port for firmware update
RS-232: 2-way device control and monitoring up to 115.2k baud with
hardware and software handshaking
IR: (Reserved for future use)
HDMI: HDCP 1.2, EDID, CEC
NOTE: Supports management of HDCP and EDID; supports management of
CEC between the connected HDMI devices and a control system

HD-MD-400-C-E HD Scaling Auto-Switcher & Extender 400
crestron.com |800.237.2041
Connectors – Receiver
HDMI, INPUT 1: (1) 19-pin Type A HDMI female;
HDMI digital video/audio input;
(DVI & Dual-Mode DisplayPort compatible [2])
FROM TX, INPUT 2: (1) 8-pin RJ45 female, shielded;
Signal extension link input port;
Connects to the TO RX port of the companion receiver via CAT5e or
Crestron DM-CBL-8G cable [1]
HDMI OUTPUT: (1) 19-pin Type A HDMI female;
HDMI digital video/audio output (DVI compatible [5])
AUDIO L/R: (1) 5-pin 3.5mm detachable terminal block;
Balanced/unbalanced stereo line-level audio output [6];
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced
IR: (1) 2-pin 3.5 mm detachable terminal block;
(Reserved for future use)
COM: (1) 5-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, hardware and software handshaking support
LAN: (1) 8-pin RJ45 female;
10Base-T/100Base-TX Ethernet port
24VDC 1.25A: (1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input;
PW-2412WU power pack included [13]
SERVICE: (1) USB Type A female;
For factory use only
Connectors – Transmitter
HDMI, INPUT 2 – 3: (2) 19-pin Type A HDMI female;
HDMI digital video/audio inputs;
(DVI & Dual-Mode DisplayPort compatible [2])
VGA, INPUT 4: (1) HD15 female;
RGB (VGA) or component video input [3];
Formats: RGBHV, RGBS, RGsB, YPbPr
AUDIO, INPUT: (1) 3.5 mm TRS mini phone jack;
Unbalanced stereo line-level audio input [4];
Maximum Input Level: 2 Vrms;
Input Impedance: 44k Ohms
TO RX: (1) 8-pin RJ45 female, shielded;
Signal extension link output port;
Connects to the FROM TX, INPUT 2 port of the companion receiver via
CAT5e or Crestron DM-CBL-8G cable [1]
24VDC 1.25A: (1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input;
PW-2412WU power pack included [13]
SERVICE: (1) USB Type A female;
For factory use only
Controls & Indicators – Receiver
FROM TX, INPUT 2: (2) LEDs, green LED indicates signal extension link
status, amber LED indicates video and HDCP signal presence
LAN: (2) LEDs, green LED indicates Ethernet link status, amber LED
indicates Ethernet activity
PWR: (1) Bi-color green/amber LED, indicates operating power is supplied
from power pack via 24VDC input or link to companion transmitter, turns
amber while booting and green when operating
AUTO: (1) Pushbutton to enable/disable auto-switching mode, and (1)
green LED to indicate auto-switching mode it enabled
INPUT 1 – 2: (2) Pushbuttons for manual input selection, and (2) bi-color
green/amber LEDs to indicate the current active input and signal presence
at each corresponding input
SETUP: (1) Red LED and (1) recessed pushbutton for Ethernet setup
Controls & Indicators – Transmitter
TO RX: (2) LEDs, green LED indicates signal extension link status, amber
LED indicates video and HDCP signal presence
PWR: (1) Bi-color green/amber LED, indicates operating power is
supplied from power pack via 24VDC input or link to companion receiver,
turns amber while booting and green when operating
AUTO: (1) Pushbutton to enable/disable auto-switching mode, and (1)
green LED to indicate auto-switching mode it enabled
INPUT 2 – 4: (3) Pushbuttons for manual input selection, and (3) bi-color
green/amber LEDs to indicate the current active input and signal presence
at each corresponding input
SETUP: (1) Red LED and (1) recessed pushbutton for Ethernet setup
Power Requirements
Power Pack: 1.25 Amps @ 24 Volts DC;
100-240 Volts AC, 50/60 Hz power pack, model PW-2412WU included;
NOTE: The power pack connects to either the transmitter or receiver,
not both.
Power Consumption: 13 Watts typical
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 20% to 90% RH (non-condensing)
Heat Dissipation: 44.3 BTU/hr
Enclosure (x2)
Chassis: Metal, black finish, with (2) integral mounting flanges,
vented sides
Mounting: Freestanding, surface mount, or attach to a single rack rail
Dimensions
Receiver: Height: 4.94 in (126 mm)
Width: 7.70 in (196 mm)
Depth: 1.11 in (28 mm)

HD-MD-400-C-E HD Scaling Auto-Switcher & Extender 400
crestron.com |800.237.2041
Transmitter: Height: 5.12 in (130 mm)
Width: 7.70 in (196 mm)
Depth: 1.11 in (28 mm)
Weight
Receiver: 1.30 lb (590 g)
Transmitter: 1.25 lb (567 g)
MODELS & ACCESSORIES
Available Models
HD-MD-400-C-E: HD Scaling Auto-Switcher & Extender 400
Included Accessories
PW-2412WU: Wall Mount Power Pack, 24VDC, 1.25A, 2.1mm, Universal
(Qty. 1 included)
Available Accessories
CEN-AVF-HUB: .AV Framework™Hub
DM-CBL-8G-NP: DigitalMedia 8G™Cable, non-plenum
DM-CBL-8G-P: DigitalMedia 8G™Cable, plenum
DM-8G-CONN-WG: Connector with Wire Guide for DM-CBL-8G
DM-8G-CRIMP-WG: Crimping Tool for DM-8G-CONN-WG
DM-8G-CONN: Connector for DM-CBL-8G
DM-8G-CRIMP: Crimping Tool for DM-8G-CONN
CBL Series: Crestron®Certified Interface Cables
MP-WP Series: Media Presentation Wall Plates
MPI-WP Series: Media Presentation Wall Plates - International Version
CNSP-XX: Custom Serial Interface Cable
IRP2: IR Emitter Probe w/Terminal Block Connector
AM-100: AirMedia®Presentation Gateway
CCS-SPK-SB-100: Sound Bar
MP-AMP30: Media Presentation Audio Amplifier
Notes:
1. The maximum cable length for the signal extension link between the transmitter and receiver is
230 feet (70 meters) using Crestron DM-CBL-8G DigitalMedia 8G cable or third-party CAT5e
(or better). Shielded cable and connectors are recommended to safeguard against
unpredictable environmental electrical noise. All wire and cables are sold separately. The signal
extension link is a proprietary interface and is not compatible with HDBaseT®, DigitalMedia™
(DM®), Ethernet, or any other CATx based interface.
2. Each HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or
Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.
3. The VGA input can accept RGB and component video signals through an appropriate adapter
(not included).
4. The analog audio input currently works exclusively with the VGA video input. The ability to
pair the analog audio input with an HDMI video input will be enabled through a future
firmware update.
5. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI
signal. CBL-HD-DVI interface cables are available separately.
6. The analog stereo audio output is only active when the input is receiving a 2-channel stereo
signal via either the analog input or HDMI.
7. EDID (Extended Display Identification Data) is data embedded in an HDMI, DVI, or VGA signal
that enables the display device to tell the scaler what resolutions and formats it can support,
allowing the scaler to configure itself automatically to feed an optimal output signal to
the display.
8. IR control capability will be enabled through a future firmware update.
9. Item(s) sold separately.
10. Supports any input resolution and scan rate that has a pixel clock of 165 MHz or lower.
11. With or without reduced blanking.
12. With reduced blanking only.
13. The transmitter and receiver are powered together by a single wall mount power pack
(included), which may be connected to either the transmitter or receiver, not both.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please
contact the Crestron sales representative for your area. A list of sales representatives is available
online at www.crestron.com/salesreps or by calling 800-237-2041.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Certain Crestron products contain open source software. For specific information, please visit
www.crestron.com/opensource.
Crestron, the Crestron logo, .AV Framework, AirMedia, Crestron Fusion, DigitalMedia,
DigitalMedia 8G, DM, and QuickSwitch HD are either trademarks or registered trademarks of
Crestron Electronics, Inc. in the United States and/or other countries. Blu-ray is either a trade-
mark or registered trademark of the Blu-ray Disc Association in the United States and/or other
countries. Dolby Digital is either a trademark or registered trademark of Dolby Laboratories in
the United States and/or other countries. DTS is either a trademark or registered trademark of
DTS, Inc. in the United States and/or other countries. HDBaseT is either a trademark or registered
trademark of the HDBaseT Alliance in the United States and/or other countries. HDMI and the
HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United
States and/or other countries. Other trademarks, registered trademarks, and trade names may
be used in this document to refer to either the entities claiming the marks and names or their
products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron
is not responsible for errors in typography or photography. Specifications are subject to change
without notice. ©2016 Crestron Electronics, Inc.

HD-MD-400-C-E HD Scaling Auto-Switcher & Extender 400
Crestron Electronics, Inc. 15 Volvo Drive |Rockleigh, NJ 07647
Tel: [phone] |Fax: [phone]
www.crestron.com
All brand names, product names and trademarks are the property of their respective owners.
©2016 Crestron Electronics, Inc.
Specifications subject to change without notice. Revised 05/23/16