Crestron SPKA-BC-IC6 User manual

The acoustic back can accessory for Crestron speakers made by Origin
Acoustics is compatible with the following Reference and Ultimate
speakers:
lREFERENCE IC6-W-T-EACH
lREFERENCE IC8-W-T-EACH
lULTIMATE IC6-AW-W-T-EACH
lULTIMATE IC6-W-T-EACH
lULTIMATE ICS8-AW-W-T-EACH
lULTIMATE IC8-AW-W-T-EACH
The flush mount kits are available in square (SQ) and circular shapes.
In the Box
1 SPKA-BC-IC6/IC8
Additional Items
6 Screws
Installation
Install the Acoustic Back Can
Mount the SPKA-BC-IC6/IC8 coustic back can accessory over the
Reference and Ultimate speakers. This accessory must be purchased
separately.
1. Install the Reference and Ultimate speakers as per the Quick Start
Docs : 8968,8970, and 9036 .
2. Connect the wire leads within the acoustic back can to the inputs on
the speaker.
NOTE: : Make sure that the back can is secured properly over the
speaker – the screw holes of the acoustic back can should sit
evenly on the corresponding surface of the speaker housing
without any gaps and without having to apply force.
3. Place the acoustic back can on the top of the speaker.
4. Insert the six supplied screws into the holes of the acoustic back can.
5. Tighten the screws until the acoustic back can is secure. Do not
overtighten.
6. Connect the speaker wire from the amplifier to the terminals on the
acoustic back can.
NOTE: Make sure that the positive cable is attached to the red
connection, and the negative cable is attached to the black
connection.
1
SPKA-BC-IC6/IC8 QuickStart
Acoustic Back Can for Reference and Ultimate IC6/IC8 In-Ceiling Speakers, 1 Pair

Visit the Product Page
Scan the QR code to visit the product page.
SPKA-BC-IC6/IC8
www.crestron.com/model/6511911
2
SPKA-BC-IC6/IC8 QuickStart
Acoustic Back Can for Reference and Ultimate IC6/IC8 In-Ceiling Speakers, 1 Pair

Additional Information
Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) under a limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software is
licensed to Crestron dealers, CSPs, and end-users under a separate End-User License
Agreement. Both of these Agreements can be found on the Crestron website at
www.crestron.com/legal/software_license_agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit
www.crestron.com/opensource.
Crestron and the Crestron logo are either trademarks or registered trademarks of
Crestron Electronics, Inc. in the United States and/or other countries. Origin Acoustics is
either a trademark or a registered trademark of Origin Acoustics, Inc. in the United States
and/or other countries. Other trademarks, registered trademarks, and trade names may
be used in this document to refer to either the entities claiming the marks and names or
their products. Crestron disclaims any proprietary interest in the marks and names of
others. Crestron is not responsible for errors in typography or photography. Specifications
are subject to change without notice.
©2022 Crestron Electronics, Inc.
Doc. 9229A
07/11/22
3
SPKA-BC-IC6/IC8 QuickStart
Acoustic Back Can for Reference and Ultimate IC6/IC8 In-Ceiling Speakers, 1 Pair