Crestron Ultimate IC3-AW-SA-BOX-WOOFER-W-T-EACH User manual

The Ultimate IC3-AW-SA-BOX-WOOFER-W-T-EACH and
UltimateIC3-AW-SA-TWEETER-EACH made by Origin Acoustics
delivers the pinnacle of performance for demanding residential
installations.
-
In the Box
1 Ultimate IC3-AW-SA-BOX-WOOFER-W-T-EACH and
Ultimate IC3-AW-SA-TWEETER-EACH
Additional Items
1 Woofer Box
6 Spacers
3 Square Flange
2 Round Flange
1 Round Grille
1 Square Grille
Installation
Connect the Speaker
Follow the procedure to connect an amplifier to the speaker assembly:
1. Terminate the speaker cable from the amplifier into the pluggable
screw terminal block.
2. Insert the pluggable screw terminal block into the back of the woofer
box.
Mount the Woofer Box
Follow the procedure to mount the woofer box to the ceiling joists:
1. Loosen the adjustment screws on the support rails to allow them to
expand out to the appropriate length.
Ultimate IC3-AW-SA-BOX-WOOFER-W-T-EACH and
Ultimate IC3-AW-SA-TWEETER-EACH QuickStart
Ultimate 2-Way In-Ceiling All-Weather Speaker, Single
1

2. Create a temporary platform to rest the woofer box so its baffle
surface is flush to the ceiling joist edges. The install tool (sold
separately) or spare two-by-four can be used for this.
3. Adjust the support rail on each side of the woofer box to meet the
ceiling joist, then screw it into place at each end to the ceiling joist.
Tighten the support rail adjustment screws on the woofer box.
2
QuickStart
Ultimate 2-Way In-Ceiling All-Weather Speaker, Single
Ultimate IC3-AW-SA-BOX-WOOFER-W-T-EACH and
Ultimate IC3-AW-SA-TWEETER-EACH

4. Remove the temporary platform or install tool that was used for step
2.
5. Both hole plugs are already installed at the opening of the woofer
box (where the tweeter module will ultimately be placed) out of the
box. If the square plug is not needed for your install, remove the
square plug. To remove the square plug, unscrew the screw holding it
in place at its center.
Finish the Ceiling Surface
Follow these steps once the ceiling surface has been installed:
1. Remove the plug from the opening of the woofer box. Hold onto the
three long screws that are removed with the round plug, as these will
be used in a later step.
2. Any number/combination of the included spacer rings should be
installed to allow the finish to match the depth of the finished ceiling
material.
3. Secure the spacer(s) and flange to the woofer box using the three
long screws removed in step one of this section.
4. If using one of the included flush mount flanges, apply the joint
compound beginning 3-6 in. (76-102 mm) from the flush mount kit's
edge and then feather outward 8-10 in. (203-254 mm) to achieve a
smooth, flat transition.
3
QuickStart
Ultimate 2-Way In-Ceiling All-Weather Speaker, Single
Ultimate IC3-AW-SA-BOX-WOOFER-W-T-EACH and
Ultimate IC3-AW-SA-TWEETER-EACH

Install the Tweeter Module
Follow the procedure to install the tweeter module into the woofer box:
1. Connect the cable from inside the woofer box opening to the back of
the tweeter module.
2. Fit the tweeter module into the woofer box opening, through the
flange and spacers.
3. Rotate the tweeter module tabs and lock them into the flange
receptacles. Use the included set screw on one of the tabs to secure
the tab to the flange.
4. Install the appropriate grille into the flange.
4
QuickStart
Ultimate 2-Way In-Ceiling All-Weather Speaker, Single
Ultimate IC3-AW-SA-BOX-WOOFER-W-T-EACH and
Ultimate IC3-AW-SA-TWEETER-EACH

Additional Information
The original language version of this document is U.S. English.
All other languages are a translation of the original document.
Regulatory Model: M202145001
Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) under a limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software is
licensed to Crestron dealers, CSPs, and end-users under a separate End-User License
Agreement. Both of these Agreements can be found on the Crestron website at
www.crestron.com/legal/software_license_agreement.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit
www.crestron.com/opensource.
Certain Crestron products contain open source software. For specific information, please
visit www.crestron.com/opensource.
Crestron, and the Crestron logo are either trademarks or registered trademarks of
Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks,
registered trademarks, and trade names may be used in this document to refer to either
the entities claiming the marks and names or their products. Crestron disclaims any
proprietary interest in the marks and names of others. Crestron is not responsible for
errors in typography or photography.
©2022 Crestron Electronics, Inc.
Doc. 9237A
09/16/22
5
QuickStart
Ultimate 2-Way In-Ceiling All-Weather Speaker, Single
Ultimate IC3-AW-SA-BOX-WOOFER-W-T-EACH and
Ultimate IC3-AW-SA-TWEETER-EACH