Crestron CHV-TSTAT-FCU-HOTEL How to use

Crestron CHV-TSTAT-FCU-HOTEL
Heating and Cooling Thermostat
(Fan Coil Unit)
Operations & Installation Guide

The specific patents that cover Crestron products are listed at patents.crestron.com.
Crestron, the Crestron logo, Cresnet, Crestron Studio, Crestron Toolbox, D3 Pro, and SystemBuilder are either
trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other
trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others.
Crestron is not responsible for errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2014 Crestron Electronics, Inc.
Regulatory Compliance
As of the date of manufacture, the CHV-TSTAT-FCU-HOTEL has been tested and found to comply with
specifications for CE marking.
Federal Communications Commission (FCC) Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna
•Increase the separation between the equipment and receiver
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
•Consult the dealer or an experienced radio/TV technician for help
Industry Canada (IC) Compliance Statement
CAN ICES-3(B)/NMB-3(B)

Crestron CHV-TSTAT-FCU-HOTEL Thermostat (Fan Coil Unit)
Operations & Installation Guide – DOC. 7543A Contents
•
i
Contents
Heating and Cooling Thermostat (Fan Coil Unit):
CHV-TSTAT-FCU-HOTEL 1
Introduction ............................................................................................................................... 1
Features and Functions ................................................................................................ 2
Fan Coil Unit Support ................................................................................................. 2
Automation System Integration................................................................................... 2
Easy Installation .......................................................................................................... 2
Remote Sensors ........................................................................................................... 3
Specifications ..............................................................................................................4
Physical Description....................................................................................................6
Setup ........................................................................................................................................ 10
Network Wiring......................................................................................................... 10
Identity Code ............................................................................................................. 10
Installation ................................................................................................................. 11
Wiring the CHV-TSTAT-FCU-HOTEL ................................................................... 14
Uploading and Upgrading........................................................................................................ 16
Establishing Communication..................................................................................... 16
Programs and Firmware ............................................................................................ 17
Program Checks ........................................................................................................ 17
Thermostat Setup ..................................................................................................................... 18
Thermostat Operation .............................................................................................................. 24
Problem Solving ...................................................................................................................... 25
Troubleshooting......................................................................................................... 25
Check Network Wiring.............................................................................................. 28
Reference Documents................................................................................................ 29
Further Inquiries ........................................................................................................ 30
Future Updates .......................................................................................................... 30
Return and Warranty Policies .................................................................................................. 31
Merchandise Returns / Repair Service ...................................................................... 31
Crestron Limited Warranty........................................................................................ 31

Crestron CHV-TSTAT-FCU-HOTEL Thermostat (Fan Coil Unit)
Operations & Installation Guide – DOC. 7543A Thermostat: CHV-TSTAT-FCU-HOTEL
•
1
Heating and Cooling Thermostat
(Fan Coil Unit):
CHV-TSTAT-FCU-HOTEL
Introduction
The CHV-TSTAT-FCU-HOTEL is a versatile heating and cooling
thermostat for fan coil units. Relative humidity capability can be added
through an external remote humidity sensor (sold separately). Although
functional as a standalone thermostat, the CHV-TSTAT-FCU-HOTEL
delivers enhanced functionality as part of a complete Crestron®
automation system. Integrating HVAC with a Crestron system can help
lower energy bills and increase user friendliness.
The large backlit LCD display provides a clear view of temperature,
setpoint, system mode, fan mode, system status, and setup functions.
Climate control features include separate heating and cooling setpoints,
and adjustable anticipators to prevent overshooting the desired
temperature. Continuous fan operation can be selected when needed for
increased circulation

Thermostat (Fan Coil Unit) Crestron CHV-TSTAT-FCU-HOTEL
2
•
Thermostat: CHV-TSTAT-FCU-HOTEL Operations & Installation Guide – DOC. 7543A
Features and Functions
Fan Coil Unit Support
The CHV-TSTAT-FCU-HOTEL thermostat controls fan coil units. The
CHV-TSTAT-FCU-HOTEL has custom firmware, display programming,
and terminal labels designed for 3-speed fan applications. The
CHV-TSTAT-FCU-HOTEL supports on/off control of the valves and the
fan in 4-pipe fan coil applications, eliminating the need for an additional
device dedicated to controlling the fan coil unit itself.
Automation System Integration
The connection to the control system allows the functions of the
CHV-TSTAT-FCU-HOTEL to be controlled from touch screens,
keypads, wireless remotes, computers, or even a mobile device. It
supports unlimited flexibility for remote control, scheduling, and
integration with other devices and systems. However, in the event that
communication with the control system is disrupted for any reason, the
CHV-TSTAT-FCU-HOTEL remains operable to control the HVAC
system.
Easy Installation
System design and installation using Cresnet®thermostats could not be
easier. Since no control system wires are required, the
CHV-TSTAT-FCU-HOTEL can be installed just like any conventional
thermostat.
To simplify installation, physical switches are provided for the most
critical configuration options including heat and cool type, heat pump
•Wall mount heat and cool thermostat for fan coil unit HVAC
systems
•Crestron system integration
•Saves on energy costs with advanced programming abilities
•Supports two remote temperature sensors
•Allows operation in event of control system failure
•Backlit LCD display
•Fan coil unit control
•
Available in white, black, and almond

Crestron CHV-TSTAT-FCU-HOTEL Thermostat (Fan Coil Unit)
Operations & Installation Guide – DOC. 7543A Thermostat: CHV-TSTAT-FCU-HOTEL
•
3
behavior, power settings, number of heating and cooling stages, and fan
options. These settings allow HVAC contractors to install and test the
thermostats prior to the appearance of a Crestron system integrator.
When connected to a control system, setting the ID of each device
employs the same convention as Crestron's familiar TSID (touch-settable
ID) method. Each device is programmable using Crestron Studio™,
SIMPL Windows, SystemBuilder™, or D3 Pro®software just like any
wired Cresnet device. Even firmware updates are performed over the
Cresnet network.
Remote Sensors
Optional remote temperature sensors can be connected to the
CHV-TSTAT-FCU-HOTEL for enhanced flexibility and optimized
performance. Climate can be regulated according to an average of
multiple sensors, or the built-in sensors can be disabled entirely to allow
the CHV-TSTAT-FCU-HOTEL to be installed out of view. Outdoor
temperature can be monitored to optimize system performance.
Compatible sensors include the CHV-RTS and the CHV-RSS (both sold
separately).

Thermostat (Fan Coil Unit) Crestron CHV-TSTAT-FCU-HOTEL
4
•
Thermostat: CHV-TSTAT-FCU-HOTEL Operations & Installation Guide – DOC. 7543A
Specifications
Specifications for the CHV-TSTAT-FCU-HOTEL are listed in the
following table.
CHV-TSTAT-FCU-HOTEL Specifications
SPECIFICATION DETAILS
Measurement Range
Indoor Temperature
0° to 110° F (-18° to 43° C)
Outdoor Temperature
-40º to 170º F (-40º to 77º C)
Humidity
0% to 100% RH*
Temperature Tolerance
Over Full Range ±1º F (±0.5º C)
At Room Temperature
±1º F (+0.1/0.4º C)
Humidity Tolerance
±5%
Setpoint Range
Auto Setpoint 38° to 99° F (3° to 37° C)
Heat Setpoint
38° to 89° F (3° to 32° C)
Cool Setpoint
38° to 99° F (3° to 37° C)
Humidity Setpoint
5% to 90 % RH*
Relay Rating
1 amp @ 40 volts dc or 24 volts
ac (nominal)
Power Requirements
24V 2 watts (0.083 amps) @ 24 volts
ac, supplied by heating or cooling
system
Cresnet Power Usage <1 watts (<0.05 amps @ 24 volts
dc), required for Cresnet
communication only
(Continued on following page)

Crestron CHV-TSTAT-FCU-HOTEL Thermostat (Fan Coil Unit)
Operations & Installation Guide – DOC. 7543A Thermostat: CHV-TSTAT-FCU-HOTEL
•
5
CHV-TSTAT-FCU-HOTEL Specifications (Continued)
SPECIFICATION DETAILS
Display
Type Transflective LCD, backlit
Size
2.75 in (70 mm)
Resolution
128 x 64
Viewing Angle ±50° horizontal (@ 0° vertical),
±50° vertical (@ 0° horizontal)
Default Net ID 2A
Environmental
Temperature
41º to 104º F (5º to 40º C)
Humidity 10% to 90% RH
(non-condensing)
Enclosure Plastic
Dimensions
Height
3.75 in (96 mm)
Width
5.00 in (127 mm)
Depth
1.04 in (27 mm)
Weight
6 oz (165 g)
Accessories
CHV-RSS
Remote Slab Sensor and Outdoor
Temperature Sensor
CHV-RTS Remote Temperature Sensor
CHV-RTHS Remote Temperature and
Humidity Sensor
CRESNET-HP-NP-
[BK,OR,TL]
Cresnet "High-Power" Control
Cable,
non-plenum
CRESNET-NP-
[BK,OR,TL,YL]
Cresnet Control Cable,
non-plenum
CRESNET-P-
[BK,OR,TL,YL]
Cresnet Control Cable, plenum
* Requires CHV-RTHS Remote Temperature and Humidity Sensor (sold
separately).

Thermostat (Fan Coil Unit) Crestron CHV-TSTAT-FCU-HOTEL
6
•
Thermostat: CHV-TSTAT-FCU-HOTEL Operations & Installation Guide – DOC. 7543A
Physical Description
This section provides information on the connections, controls, and
indicators available on the CHV-TSTAT-FCU-HOTEL.
CHV-TSTAT-FCU-HOTEL Overall Dimensions (Front View)
5.00 in
(127 mm)
3.75 in
(96 mm)
5
4
3
2
1

Crestron CHV-TSTAT-FCU-HOTEL Thermostat (Fan Coil Unit)
Operations & Installation Guide – DOC. 7543A Thermostat: CHV-TSTAT-FCU-HOTEL
•
7
CHV-TSTAT-FCU-HOTEL Overall Dimensions (Front and Side
Views)
CHV-TSTAT-FCU-HOTEL Backplate (Front Cover Removed)
1.04 in
(27 mm) 3.27 in
(84 mm)
TOP
24V
Y
Z
G
NETWORK
678
9

Thermostat (Fan Coil Unit) Crestron CHV-TSTAT-FCU-HOTEL
8
•
Thermostat: CHV-TSTAT-FCU-HOTEL Operations & Installation Guide – DOC. 7543A
Connectors, Controls, and Indicators
# CONNECTORS,
CONTROLS, AND
INDICATORS
DESCRIPTION
1 FAN Button Change fan speed and turn
thermostat off
2
ºF / ºC Button
Change display between
Fahrenheit and Celsius
3
▲
Raises temperature setpoint;
Selects user modes and
increments selection in setup
modes
4 ▼Lowers temperature setpoint;
Selects user modes and
decrements selection in setup
modes
5
LCD DISPLAY
Displays current operating
functions and setup screens
6
Remote Sensing
Connections (Optional)
RSR: Remote Sensor Return
RSR: Remote Sensor Return
RS1: Remote Sensor
Terminal – Connect the
sensor from RS1 to RSR
RS2: Remote Sensor
Terminal – Connect the
sensor from RS2 to RSR
(Continued on following page)

Crestron CHV-TSTAT-FCU-HOTEL Thermostat (Fan Coil Unit)
Operations & Installation Guide – DOC. 7543A Thermostat: CHV-TSTAT-FCU-HOTEL
•
9
Connectors, Controls, and Indicators (Continued)
# CONNECTORS,
CONTROLS, AND
INDICATORS
DESCRIPTION
7 Power Connections
(Required)
24 (C): 24 Vac common
terminal supplies remote 24
Vac power to thermostat
24 (R): 24 Vac return terminal.
Can be connected to R by
P4 jumper placed in lowest
position
8 Network
(Optional)
(1) 4-position terminal block;
Cresnet slave port, connect to
Cresnet control network
24: Power (24 Vdc)
Y: Data
Z: Data
G
: Ground
9
Control Connections
(System Dependent)
(2) 9-position terminal blocks
R: Return for system call
R: Return for system call
LO: Calls for low fan speed
MED: Calls for medium fan
speed
HI: Calls for high fan speed
W: Calls for heat
Y
: Calls for cool

Thermostat (Fan Coil Unit) Crestron CHV-TSTAT-FCU-HOTEL
10
•
Thermostat: CHV-TSTAT-FCU-HOTEL Operations & Installation Guide – DOC. 7543A
Setup
Network Wiring
When wiring the Cresnet network, consider the following:
•Use Crestron Certified Wire.
•Use Crestron power supplies for Crestron equipment.
•Provide sufficient power to the system.
CAUTION: Insufficient power can lead to unpredictable results
or damage to the equipment. Use the Crestron Power Calculator to
help calculate how much power is needed for the system
(www.crestron.com/calculators).
For Cresnet networks with 20 or more devices, use a Cresnet
Hub/Repeater (CNXHUB) to maintain signal quality.
For more details, refer to “Check Network Wiring” on page 28.
Identity Code
NOTE: The latest software can be downloaded at
www.crestron.com/software.
The Net ID of the CHV-TSTAT-FCU-HOTEL has been factory set to
2A. The Net IDs of multiple CHV-TSTAT-FCU-HOTEL devices in the
same system must be unique. Net IDs are changed from a personal
computer (PC) via Crestron Toolbox™ (refer to “Establishing
Communication” on page 16).
When setting the Net ID, consider the following:
•The Net ID of each unit must match an ID code specified in the
Crestron Studio or SIMPL Windows program.
•Each network device must have a unique Net ID.
For more details, refer to the Crestron Toolbox help file.

Crestron CHV-TSTAT-FCU-HOTEL Thermostat (Fan Coil Unit)
Operations & Installation Guide – DOC. 7543A Thermostat: CHV-TSTAT-FCU-HOTEL
•
11
Installation
The CHV-TSTAT-FCU-HOTEL is supplied with two #06-32 x 1 in
(26 mm) pan head screws (2007251).
NOTE: Installers should have a strong working knowledge of HVAC
systems.
The location of the thermostat can affect its performance and efficiency.
Install the thermostat away from direct sunlight, drafts, doorways,
skylights, and windows. Also, make sure the thermostat is conveniently
located for control access and setup.
Thermostats should be mounted 60 inches (~1.6 meters) above the
finished floor (HVAC industry standard). Do not mount on an exterior
wall. The following tools and hardware may be required for installation:
•Standard 1-gang electrical box (not supplied)
•Phillips screwdriver (not supplied)
•Two 1-inch pan head Phillips screws (included)
•Wall Anchors
•Drywall Screws
Use the following procedure to install the CHV-TSTAT-FCU-HOTEL in
a 1-gang electrical box (refer to illustration on the following page):
1. Turn HVAC system power OFF.
2. Separate the thermostat front plate from the rear plate. It may be
necessary to exert force when removing the front plate.
3. Feed HVAC wiring from the electrical box through the hole in the
center of the rear plate so it can be connected to the proper
terminals on the CHV-TSTAT-FCU-HOTEL after the thermostat
is mounted.
CAUTION: Excess wire pinched between the
CHV-TSTAT-FCU-HOTEL and electrical box could cause a short
circuit. Make sure that all excess wire is completely inside the
electrical box and not between the box and the
CHV-TSTAT-FCU-HOTEL.
NOTE: To ensure accurate temperature readings, avoid drafts in
the back of the unit by plugging the wire hole with insulation.

Thermostat (Fan Coil Unit) Crestron CHV-TSTAT-FCU-HOTEL
12
•
Thermostat: CHV-TSTAT-FCU-HOTEL Operations & Installation Guide – DOC. 7543A
4. Make sure unit is correctly oriented and place it in the electrical
box.
5. Attach the CHV-TSTAT-FCU-HOTEL rear plate to the electrical
box using the two included #06-32 x 1 in (26 mm) pan head
screws. Screws and wall anchors can also be used to attach the rear
plat directly to a wall.
CAUTION: Do not press on the LCD display during mounting, as
this may cause the screen to crack.
6. Attach the front plate.
Installing the CHV-TSTAT-FCU-HOTEL in a Horizontally
Mounted 1-Gang Electrical Box
NOTE: Install insulation (not supplied) in the 1-gang electrical
box to prevent inaccurate readings.
7. Carefully remove the warning label from the LCD display.
8. Turn HVAC system power ON.
Use the following procedure to install the CHV-TSTAT-FCU-HOTEL
directly on a wall (refer to illustration on the following page):
1. Turn HVAC system power OFF.
Stud
Screws, Phillips,
Pan Head,
06-32 x 1 in
1-gang
Electrical Box
(Not Provided)

Crestron CHV-TSTAT-FCU-HOTEL Thermostat (Fan Coil Unit)
Operations & Installation Guide – DOC. 7543A Thermostat: CHV-TSTAT-FCU-HOTEL
•
13
2. Separate the thermostat front plate from the rear plate. It may be
necessary to exert force when removing the front plate.
3. Feed HVAC wiring through the hole in the wall and the hole in the
center of the rear plate so it can be connected to the proper
terminals on the CHV-TSTAT-FCU-HOTEL after the thermostat
is mounted.
CAUTION: Excess wire pinched between the
CHV-TSTAT-FCU-HOTEL and the wall could cause a short
circuit.
NOTE: To ensure accurate temperature readings, avoid drafts in
the back of the unit by plugging the wire hole with insulation.
4. Make sure unit is correctly oriented and attach the
CHV-TSTAT-FCU-HOTEL rear plate to the wall using screws and
wall anchors.
CAUTION: Do not press on the LCD display during mounting, as
this may cause the screen to crack.
5. Attach the front plate.
Installing the CHV-TSTAT-FCU-HOTEL Directly on the Wall
6. Carefully remove the warning label from the LCD display.
7. Turn HVAC system power ON.
Screws
(Not Provided)
Wall Anchors
(Not Provided)

Thermostat (Fan Coil Unit) Crestron CHV-TSTAT-FCU-HOTEL
14
•
Thermostat: CHV-TSTAT-FCU-HOTEL Operations & Installation Guide – DOC. 7543A
Wiring the CHV-TSTAT-FCU-HOTEL
Make the necessary connections as called out in the illustrations that
follow for terminal information. A small flat head screwdriver (not
supplied) is required to attach the control wires from the HVAC system.
Apply power after all connections have been made.
Connections for the CHV-TSTAT-FCU-HOTEL
NOTE: Place the jumper in the lowest position to connect pin 3 and pin
4 to provide power to the thermostat.
TOP
24V
Y
Z
G
NETWORK
RS2: Remote Sensor 2
RS1: Remote Sensor 1
RSR: Remote Sensor Return
RSR: Remote Sensor Return
LO: Fan Low
R: Reference
R: Reference
MED: Fan Medium
HI: Fan High
24(R): 24 Vdc Return
24(C): 24 Vdc Supply
Y: Cool Valve
W: Heat Valve

Crestron CHV-TSTAT-FCU-HOTEL Thermostat (Fan Coil Unit)
Operations & Installation Guide – DOC. 7543A Thermostat: CHV-TSTAT-FCU-HOTEL
•
15
Wiring the CHV-TSTAT-FCU-HOTEL
Wiring the CHV-RTS and Cresnet Connections
TOP
24V
Y
Z
G
NETWORK
Reference
Power
Cool Valve
Heat Valve
Fan High
Fan Medium
Fan Low
CHV-RTS
TOP
24V
Y
Z
G
NETWORK
To Cresnet

Thermostat (Fan Coil Unit) Crestron CHV-TSTAT-FCU-HOTEL
16
•
Thermostat: CHV-TSTAT-FCU-HOTEL Operations & Installation Guide – DOC. 7543A
Uploading and Upgrading
Crestron recommends using the latest programming software and that
each device contains the latest firmware to take advantage of the most
recently released features. However, before attempting to upload or
upgrade it is necessary to establish communication. Once communication
has been established, files (for example, programs or firmware) can be
transferred to the control system (or device). Finally, program checks can
be performed (such as changing the device ID or creating an IP table) to
ensure proper functioning.
NOTE: Crestron software and any files on the website are for authorized
Crestron dealers and Crestron Service Providers (CSPs) only. New users
must register to obtain access to certain areas of the site (including the
FTP site).
Establishing Communication
Use Crestron Toolbox for communicating with the
CHV-TSTAT-FCU-HOTEL; refer to the Crestron Toolbox help file for
details. There a single method of communication: indirect.
Indirect Communication
CHV-TSTAT-FCU-HOTEL connects to control system via Cresnet:
1. Click Tools | System Info.
2. Click the icon to open the “Edit Address” window.
3. In the “Edit Address” window make the following selections:
•For Connection Type, select Indirect.
•For Device is at, select Cresnet ID.
•In the Device is at drop-down menu, select the ID of the
CHV-TSTAT-FCU-HOTEL.
PC Running
Crestron Toolbox
Serial,
or USB
LAN
Cresnet
Control
System
CO M PU TER
PWRN ETH W -R
SW-R ACQUIRE ACTIVITY
CHV-TSTAT-
FCU-HOTEL