CrimeStopper Ezee Start EZ-64TW1 User manual

EZ-64TW1/EZ-74TW2/EZ-84FM
EZ-95FM
2-Way Paging RemoteEngineStarting &Keyless
EntrySystem with 1-Way Sidekick RemoteControl
OPERATINGINSTRUCTIONS
-PRIMARY: Theseare featuresthatmustbe connected inorder for the systemtooperateproperlyi.e. Remote
Startconnections,Flashing lights,BrakeReset. For programming,the hood pinand programbutton are required.
-OPTIONAL: Theseare featuresare tobe connected onlyifdesired or agreed upon bythe customer and the
installing dealer i.e.Door Locks,TrunkPop,DomeLightIllumination,Horn-Honk,Anti-Grind,etc.Thesefeatures
mayalsorequire additionalpartsand/or labor fees.Consultwithyour installer beforehand tobe sure ofwhatis
going tobe installed withyour particular system.
TECHNICALSUPPORT:[phone]
Monday-Friday8:00am-4:30pmPacificStd. Time
Web Site: www.crimestopper.com
E-mail: [e-mail]
CRIMESTOPPERSECURITYPRODUCTS, INC.
1770 S. TAPO STREET, SIMIVALLEY, CA. 93063
REV C–011.11.2005
ThisdevicecomplieswithFCC Rulespart15.Operation is
subjecttothe following twoconditions: 1)Thisdevicemaynot
causeinterference,and (2)thisdevicemustacceptany
interferencethatmaybe received,including interferencethat
mayc
auseundesired operation.The manufacturerisnot
responsibleforanyradioorTVinterferencecaused by
unauthorized modification tothisequipment. Suchmodification
couldvoidthe user'sauthoritytooperatethe equipment.

2
TABLEOF CONTENTS
Operation Cautions&Warnings….………………..…………………………………….……………………….………2
2-WayPaging LEDRemoteTW1...........……………………………………………………….……………………….3
2-WayPaging LCD RemoteTW2..…….…………………………….………………………………….……………….4
2-WayPaging LCD RemoteFM…..……....……………………………………………………………….………...…..5
Using the Remote1-WayRemote………………………………………………….…………………………..….….6-7
RemoteEngine Starting……………………………………………………………..…………………………….…..8-11
Turbo Timer Mode……………………………….………………………………....……………………………...….…12
Convenienceand SafetyFeatures…….……………………….…………..…….…………………..………...….13-14
Transmitter Programming….…………….…………………………………….….…………….…..………….…....…15
2VehicleOperation.…………………………….………………...……………….……..………....…………..………16
Troubleshooting “Before You Call”………….…………..……………………….…………….….….……..….….17-18
LowBatteryWarning and replacing the AAA batteryon LCD Remote……..……………………………………..19
Setting the Clock……………………………………………………………………………...…………..……Back Page
OPERATIONCAUTIONS&WARNINGS
CRIMESTOPPERSECURITYPRODUCTS,INC. and its VENDORS shall notbe liablefor anyaccidentresulting
fromthe useofthisequipment. Thissystemisdesigned tobe professionallyinstalled intoacar or vehicleinwhich
all items,suchasparking brakeand all associated components,door switches,transmission shift linkage,throttle
linkage, and all engine safetyfeatures, are inperfect working condition.
DONOTinstall theRemote EngineStarting Systemon MANUALTRANSMISSIONvehicles. If accidentallyleft
ingear the vehiclecouldbecomeaself-propelled threat tolifeand property.
ITISABSOLUTELYTHEOWNER’SSOLERESPONSIBILITYTO: A)Understand the operation ofthissystem
and itssafetyfeatures.B)Check for proper operation ofthe systemprior toaccepting deliveryofthe vehiclefrom
the installation facility.C)Check and maintainthe condition ofthe vehicleand all itemsrelativetothe proper
operation ofthissystemand itssafetyfeatures.D)Always leavethe doorsand windowsclosed and locked to
protect against accident and theft.
DONOTremote startthevehicleinaclosedgarage. Makesure thatthe garage door isopen or there is
adequateventilation.Failure toobservethisrulecouldresultin injuryordeath frompoisonousCarbon Monoxide
fumes.

3
2-WAYPAGINGLEDREMOTEEZ-64TW1
TWO-WAYPAGEROPERATION&PAGETONES:
FEATURE BUTTON ACTION BEEPS LED/FLASH
LOCK #1 (Lock) Press &Release 1Xthen 1Xagain Orange / 1X
UNLOCK #2 (Unlock)Press &Release 1Xthen 2Xagain Green / 2X
AUX#1 #3 (Trunk) Press &Hold2Sec.1Xthen 3Xagain Yellow/ 1X
REMOTESTART#4 (Start) Press &Hold2Sec.1Xthen 3Xagain Blue /3X
ENGINERUNNING6X Blue / 6X
TURN OFF ENGINE
#4 (Start) Press &Hold2Sec.1X NoPage back
PANIC #1 (Lock) Press &Hold3Sec. 1Xthen 2X/ 12X Orange 12X/ Green 1X
UNLOCK
LOCK
PAGING
LED's
REMOTE
ANTENNA
FIXED
TRUNK
#1 #2
#3 #4
POP START
#5
CAR2
nd
OPERATION:
BUTTON1(Lock Symbol):
·Press and release toLock doors.
·Press and Holdformorethan3secondstoactivate
“Panic”feature.
BUTTON2(Unlock Symbol):
·Press and release toUnlock doors.
BUTTON3(TrunkSymbol):
·Press and Holdfortwosecondstoactivatetrunkpop
(Optional Feature).
BUTTON4(Start):
·Press and HoldfortwosecondstoStart/Stop Engine
BUTTON 5(Sidebutton)
§Press andRelease toshow thepreviousstatus.
§Press andHoldfor5secondtoswitchtovehicle#2.

4
OPERATION:
BUTTON1(LOCK Symbol):
·Press and release toLock doors.
·Press and Holdformorethan3secondstoactivate“Panic”
feature.
BUTTON2(Unlock Symbol):
·Press and release toUnlock doors.
BUTTON3(TrunkSymbol):
·Press and Hold two seconds
toactivatetrunkpop (Optional
Feature).
BUTTON4(StartKeySymbol):
·Press and Hold two seconds toStart/Stop engine.
BUTTON5(Onsideofremote):
·Press and release to light up the LCD screen.
·
Press and release twice to recall the last message from the
LCD screen.
·
Press and Hold two seconds to change from Car 1to Car 2
·Press 5times to change the time and
enable/disable beep
tones from the remote.
LOCK
UNLOCK
TRUNK POP REMOTESTART
(KEYFLASHING)
LOWBATTERY
PANIC
2-WAYPAGINGLCD REMOTEEZ-74TW2
#2UNLOCK
LCD
SCREEN
#4ENGINE
START/STOP
#1LOCK
#3TRUNK
#5 RECALL
CARIorII
FIXED
ANTENNA
AM

5
2-WAYPAGINGLCD REMOTEEZ-84FM/95FM
#1ARM/
LOCK
#4ENGINE
START/STOP
#5
RECALL/
CAR IORII
#3 TRUNK
POP
#2 DISARM/
UNLOCK
ANTENNA
FIXED
LCD
SCREEN
PM
PM
PM PM
PM
IGN
PM
IGN
(<<<<MOVING<<<<<)
LOCKUnLock Trunk PopConfirmRemoteSuccessfulStart
Start Request
OPERATION:
BUTTON1(Lock Symbol):
·Press and release toLock system.
Press and Holdformorethan3secondstoactivate
“Panic”feature.
BUTTON2(Unlock Symbol):
·Press and release toUnlock system.
BUTTON3(TrunkSymbol):
·Press and Release toactivatetrunkpop (Optional
Feature).
BUTTON4(StartSymbol):
·Press and release toStart/Stop Engine.
BUTTON5(OnSideofRemote)
·Press and release torecall thelast
messagefromthe
LCD screen.
·Press and Hold5secondstochangefromCar1toCar2.
·Press 5times toenable/disablebeeptones fromthe
remote.

6
USINGTHE1-WAYREMOTE
#3
#1
#2
#4
LOCK
TRUNK
REMOTE
UNLOCK
VEHICLE2
FLASHLIGHT
START
#5
The transmitter supplied withthe EZEE Startsystemcontainsfour buttons,flashlight, and vehicle2switch.The
button configuration ofthe EZEE StartsystemisFactory-setand unchangeable.See Page 16 for additional
information on howtouseyour remotetooperateasecond vehicleequipped withaEZEE Start system.
NOTE:BUTTON#4 and #3 Remote Start/Trunk
There isadeliberatedelayor 2presses(Optional)builtintothe systemon button #4 and #3 tohelpprevent
accidentalremotestarting fromthe remotebeing inyour pocketor purse.During normaluse,ifyou press button #4
or #3 too quickly, the systemmaynot start the engine or open trunk.
OPERATION:
BUTTON1(Lock Symbol):
·Press and release toLock doors.
·Press and Holdformorethan3secondsto
activate“Panic”feature.
BUTTON2(Unlock Symbol):
·Press and release toUnlock doors.
BUTTON3(TrunkSymbol):
·Press and Holdfortwosecondstoactivate
trunkpop (Optional Feature).
BUTTON4(Start):
·Press and HoldfortwosecondstoStart/Stop
Engine
BUTTON 5(Sidebutton)
§Press andHoldfor5secondtoswitchto
vehicle#2.
FLASHLIGHT
·Press touse built-inflashlight.
ReplacementBattery
GP23A(12volt)
#3
#1
#2
#4
LOCK
TRUNK
REMOTE
UNLOCK
VEHICLE2
FLASHLIGHT
START
#5

7
USING THE1-WAY REMOTEEZ-95FM
START
LOCK UNLOCK
REMOTE
#4
#3
#2
#1
2ND VEHICLE
TRUNK
(AUX#3)
(AUX#2)
(AUX#4)
STARTER
#5
EZEE START
(2ND FUNCTION)
The transmitter supplied withthe EZ-84FM/95FMsystemhasfivebuttons.The button configuration ofthe EZ-
84FM/95FMisFactory-setand unchangeable.See Page 16 for additionalinformation on howtouseyour remoteto
operateasecond vehicleequipped withaEZEE Start system.
NOTE:BUTTON#4 and #3 Remote Start/Trunk
There isadeliberatedelayor 2presses(Optional)builtintothe systemon button #4 and #3 tohelpprevent
accidentalremotestarting fromthe remotebeing inyour pocketor purse.During normaluse,ifyou press button #4
or #3 too quickly, the systemmaynot start the engine or open trunk.
ReplacementBattery
GP23A(12volt)
OPERATION:
BUTTON1(Lock Symbol):
·Press and release toLock doors.
·Press and Holdformorethan3secondstoactivate
“Panic”feature.
BUTTON2(Unlock Symbol):
·Press and release toUnlock doors.
·Press 2times forDriverDoorPriorityUnlock.
BUTTON3(TrunkSymbol):
·Press and Holdfor½second orpress twice to
activatetrunkpop.
BUTTON4(Start):
·Press and Holdfor½second orpress twice to
Start/Stop Engine.
BUTTON 5(Vehicle#2/ 2ND Function)
§AUX#2:Press button5thenpress button1.
§AUX#3:Press button5thenpress button2.
§AUX#4:Press button5thenpress button3.
§Press andHoldfor2sec. forvehicle#2.

8
REMOTEENGINESTARTING
REMOTEENGINESTARTING -SUCCESSFULSTART:
1) Press the remotestart button for at least 1/2second (Default)or twiceif set for doublepress.
2) Parking lightsflashonce; return solid, and the Ignition/Acc circuitsturn on.
3) After afewsecondsthe Starter Motor engages, Parking lightsand Acc circuitswill turn off whilecranking.
4) Engine Startsand Runs. Parking Lightsand Acc turn backon, DoorsLock.
5) Engine will remainrunning for programmed run timeuntil resetwithBrakepedal.Ifneeded,the engine can be
turned off withremotetransmitter bypressing and releasing or doublepress the Start button.
AFTER
IGN
4
STARTER
THEN
FLASH1X
SOLID
SOLID
SEC.
THEREMOTESTARTERBUTTONISPROGRAMMABLEFOR1OR2PRESSES
REMOTEENGINESTARTING -UNSUCCESSFULSTART
Inthe eventthatthe engine doesnotstarton the firstattempt, the systemshutsdownfor afewseconds,and then
attemptstorestartthe engine a2nd and 3rd time.For hard starting engines,the unitwill allowastarter cranktimeof
up to10 secondsmaximum.Thisshouldprovide amplecranking timefor difficultstarts,butislimited to13 seconds
tohelpprevent damage tothe starter fromover cranking.
1) If engine startson 2nd or 3rd attempt, see steps4&5aboveof "SuccessfulStart".
2) If Third attempt failstostart engine, the systemwill turn off and doorswill remainlocked.
NO FURTHERATTEMPTSWILL BE MADEAUTOMATICALLY
TURNING OFF AREMOTESTARTEDENGINE:
1) Engine isrunning inRemoteStart (Parking lightsON).
2) Press and releasethe remotestart button.
3) Engine &parking lightsOFF, Doorsre-lock/re-arm.

9
REMOTEENGINESTARTINGCont.
ENTERING YOUR REMOTESTARTEDVEHICLE:
1) Withengine running, RemoteUnlocksystem(If equipped) or open door withkey.
2) Enter vehicleand be carefulnot tostep on brakepedal!(RemoteStart Reset).
3) Turn Ignition toON/RUN position, then press brakepedaltoreset the RemoteStarter &Shift out of park.
4) Remotestarter will resetinstantlywhen the brakeispressed.Parking lightswill turn off and the ignition keyis
nowcontrolling your vehicle.
REMOTESTART RUN TIMERESET:
You can nowreset the engine-run timer toallowfor more running timeafter remotestart hasalreadyoccurred
using the remotecontrol. After asuccessfulremotestart, press boththe Lock&Unlockbuttonstogether for at
least 2seconds. The parking lightswill flash3timesand internalengine timer will reset backtozero minutes.
IDLEDOWNMODE:
Thismode allowsthe unittotakeover operation ofthe parked vehiclewhilethe ignition keyisremoved and you exit
the vehicle.The vehicleisputintoaremoterunning condition before you exitand itwill remainrunning for the
programmed run timeor until you comeback.
Examples:
·You pull up to aconvenience store for aquick stop, "Idle Down"mode keeps engine running when you exitthe vehicle,
(with keys in hand) remote lock doors or armalarm. When you return, unlock, turn ignition ON and drive away.

10
REMOTEENGINESTARTING
IDLEDOWNMODE-EXITING THEVEHICLE:
1) Withvehicleengine running withkey,**press the RemoteStartbutton for atleasta1/2second or twiceifsetfor
doublepress.
2) Parking Lightswill turn ON.
3) Doorswill unlock, or if brakepedalisbeing depressed, doorswill unlockwhen it isreleased.
4) Turn OFF Ignition and removekey. Engine shouldremainrunning.
5) Exit vehicle, then remotelockdoorsif desired.
6) Engine will remainrunning for programmed run timeor until you return (whichever comesfirst).
IGN
SOLID
OFF
UNLOCK
ENTERING AVEHICLEDURING “IDLE-DOWN”or“INFINITYRUN”MODES:
1.Withengine running in"IDLEDOWN"(parking lightsON), unlockdoor viaremoteor key.
2.Enter vehicleand be carefulnot tostep on brakepedal!(RemoteStart Reset)
3.Turn Ignition toON/RUN position,then depress brakepedaltoresetthe RemoteStarter.Parking lightswill
turn off indicating the RemoteStart isOFF and Vehicleisrunning bythe Key. Driveawayasnormal
INFINITYRUN MODE
Thismode can onlybe activated when "IdleDown"procedure.The InfinityRun mode allowsthe vehicleengine to
remainrunning INDEFINITELYafter the programmed run timeelapses.Thismode will allowthe vehicletobe left
running and unattended without the ignition keyinthe switchpreventing the vehiclefrombeing stolen.Thismode
can be beneficialtolawenforcementor commercialtrucksthatneed toremainrunning unattended for long periods
of time. See next page for Infinitymode steps.
**Programmablefor½second press ordoublepress. Thisoption isselectablebyyourinstaller.

11
REMOTEENGINESTARTING
INFINITYRUN MODE–EXITING THEVEHICLE:
1) Withvehicleengine running withthe key,**press the RemoteStartbutton for atleast1/2second,pauseafew
seconds, then press and releasethe remotestart button asecond time.
2) Parking Lightswill start flashing, and doorswill unlock.
3) Turn Ignition switchOFF, removekeyand exit the vehicle. Engine shouldremainrunning.
4) The vehicle’sparking lightswill flashfor the programmed run timeof12,24,or 36,or 48 minutesand then switch
tosolidwhilemotor runsindefinitelyor until fuelsupplyrunsout.
SELECTABLEHOURLYCOLD-STARTMODE(1- 4HOURS)
Thismode allowsthe vehicletobe programmed toself-startevery1,2,3or 4hoursand run for the programmed
run time.Thiscan be helpfulduring extremelycoldconditionswhere engine fluidfreeze-up isaconcern.THE
VEHICLEMUSTBEOUTDOORSORINAWELL VENILATEDAREA! Oncethismode isset, the unitwill startat
the programmed hourlyintervaland run for the programmed run time.Toresetthismode,startthe vehiclewiththe
keyor the remotecontrol.
SELECTABLEHOURLYCOLD-STARTMODE–EXITING THEVEHICLE:
1) Engine shouldbe running withthe Key.** Press the RemoteStartbutton for atleast1second.Lightswill turn on
signaling the remotestart hasturned on and doorswill unlock.
2) Within10 secondspress and releasethe valet/programbutton oncefor eachhourlyincrement(1 time=1hour,
2X=2hours, 3X=every3hours, 4X=every4hours).
3) Parking Lightswill turn oncethe button ispressed and flashfor eachconsecutivebutton press.
4) Turn Ignition switchOFF, removekeyand exit the vehicle. Engine shouldremainrunning.
5) Onceoutside the vehicle,press and releasethe remotestartbutton toturn off engine.The parking lightswill
flashthe number of timesindicating the hourlyincrement for confirmation.
6) The vehiclewill startbyitselfatthe selected hourlyincrementuntil driven withkeyor started viathe remote
control.
**Programmablefor½second press ordoublepress.Thisoption isselectable
byyourinstaller.

12
TURBOTIMERMODE(OPTIONAL)
The optionalTurbo Timer mode allowsthe EZEE Startsystemtokeep aTurbo or Turbo Dieselvehiclerunning for 1
to5minutes[selectively]after you removethe key,exitthe vehicle,and lockthe doorsremotely.Thisishandyfor
turbo cool-downwithoutthe need for expensiveturbo timers.Thismode requiresthe useofan extra partcalled a
momentaryswitch/button that isnot included withthe kit. Checkwithyour installer about adding thisfeature.
NOTE: The turbo timer button will alsotrigger aremotestart if it isinadvertentlypressed when the vehicleisnot
running. Pleasenotethiswhen installing the button and choosealocation out of harm’sway.
1) Engine shouldbe running withthe key.
2) Press and holddownthe brakepedal.
3) Press your “Turbo Timer” button 1to5timesfor eachminuteof run timeyou desire. (1 press =1min.)
4) Asyou releasethe brakepedaland your systemwill confirmbyflashing the lightsthe samenumber oftimesthe
button waspressed.
5) Turn Ignition switchOFF,removekeyand exitthe vehicle.Remotelockyour doorsfor safety.The engine
shouldremainrunning for the selected number of minutes.
REMOVEKEY
PRESSTURBO
FLASH1-5X
EXITVEH.
PRESS
AND HOLD
BRAKE
TIMER BUTTON
1-5 TIMES
RUNNING
RELEASE
BRAKE
LIGHTS
RUNNING
REMAIN
1-5MIN.

13
CONVENIENCEAND SAFETYFEATURES
KEYLESS ENTRY(POWERDOORLOCK CONTROL, Optional)
Thissystem enables youto remotelylock andunlock thevehicle’s doors (ifequipped withpower locks) viaremote control
for safety andconvenience. Note: This feature may require extra labor and/or parts to install. Press the Lock or Unlock
transmitter buttonas youleave or come near thevehicle. Parkinglights will flashonce for lock andtwice for unlock. If
vehicle is running by the remote start system, the lights will flash, but returnback to solid.
AUTO LOCK/UNLOCK (Improved)
TheAuto Lock feature controlswhether thedoors will automaticallylock/unlock onyourvehiclewhendrivingor withturning
theIgnitionON/OFF. If theAuto Lock feature isturned on,andyoursystem isin“Tach”mode, thenthedoors should
automaticallylock as theengineRPM increase (driving). If theAuto Lock feature isturned on,andyoursystem isin“Smart
Tachless” mode, thenthedoors will lock afew seconds after theIgnitionisturned on.WhentheAuto Lock feature isturned
on,thesystem will always unlock thedoors whentheIgnitionisturned off. Withthisfeature turned OFF, thesystem will not
automatically lock or unlock the vehicle. See your installer for programming informationonthis feature.
DOORLOCK NOTE: If yoursystemhasbeen setup withan optionalstarterkill relay,butyou do nothavepowerdoorlocks,note
the following: The lock and unlock buttonson the remotecontrolmust still be utilized tooperatethe Starterdisable.
REMOTEPANIC(UsedonlywithOptional HORN HONK featureinstallation)
For personalsafety thisunitnow includes apanicfeature. To soundthevehiclecar horn,press theLock Buttononthe
remote for more than2seconds. Thevehiclehornwill honkalongwithflashingparkinglamps for 1minute. Reset Remote
Panic by pressing either the lock or unlock button. See next sectionfor HornHonk information.
HORN CHIRP/HONK OUTPUT(Optional:withHornconnection &programming)
Thisfeature, ifinstalled, will provide audibleconfirmationchirps from thefactory hornfor lock andunlock. Whenusingthis
feature, pressingtheLock or Unlock buttona2nd time within3-7 seconds will provide ahornchirp for audibleconfirmation.
The system canalso be programmed to provide 3chirps when aremote start isrequested usingtheremote. Note: Horn
honk/chirp feature may require extra labor and/or parts to install.
REMOTETRUNK RELEASE ORDOMELIGHTILLUMINATION(Optional)
ThisEZEE Start system includes anoutputthat canbe programmed to remotelyrelease afactory electronictrunkor
illuminate theinterior lightwhenyouunlock yourvehiclefor lighted entry at night. If youhave theoptionaltrunkpop
installed, simplypress andrelease theTrunkButton#3 onthetransmitter or ifoption#6isturned onyoumust press Button
# 3 twice within3 seconds, to remotely opentrunk. If your system isprogrammed for Dome Lightillumination,then itwill
work automaticallylightingthedome lightfor 30 seconds whenyouunlock yourvehicleviatheremote. Thedome lightwill
turnoff after 30 seconds, or turningthekey on(whichever comes first). ThetrunkPop or Dome LightIlluminationmay
require extra labor and/or parts to install.

14
CONVENIENCEAND SAFETYFEATURES
VALETMODE/ STARTERDISABLEOVERRIDE
Before servicing your vehicleor handing the keysover toaValetwerecommend putting the unitintovaletmode.
The remotestartfunction WILL NOToperatewhen inValetmode.Toenter Valetmode, turn the keytothe ON
position,press and holdProgram/Valetswitchfor 5-6 seconds.The LEDwill turn on solidand the systemisnowin
valet. Performthisprocedure againtoexitofValetmode.The keyless entrywill still function normallywhileinvalet
mode. Inthe event of alost or broken transmitter, performthisstep tooverride the Starter Disable(if installed).
ANTI-GRIND / STARTERDISABLE(Optional, relaynotincluded)
ThisOptionalfeaturepreventsthe userfromaccidentallygrinding the starterifthe Ignition keyisturned too fartothe startposition
whileengine isalreadyrunning fromthe remotestarter.The Anti-Grind/StarterDisablerequiresthe useofan externalrelay.This
systemmust be programmed toallowthe relaytoworkasastarterdisable.
PASSIVE STARTERDISABLE(Optional)
ThisEZEE STARTsystemincludesaprogrammablefeature toallowthe OptionalStarter Disabletoactivate
automatically1minuteafter the ignition isturned off. Thisprogrammablefeature mayprovide insurancediscounts
for “PassiveSecurity”functions, or meet an insurancerequirement inyour province(CAN).
HOODOPENSAFETY(Requires grounding hood pininstallation)
Preventsthe engine frombeing RemoteStarted when hood isopen and will shutOFF the engine ifopened during
whileremotestarted.Eliminatesriskofinjurytosomeone working under the hood ofthe vehiclewithaproperly
working hood pininstalled.IfRemoteStartbutton ispressed withthe hood open,the lightswill flashonceand the
unit will not attempt astart.
BRAKEPEDALRESET
Preventsstarting orshutsoff aremotestarted vehiclewhen thiscircuitisactiveoractivated.Preventsunauthorized tampering.This
circuit shutsthe systemdownimmediatelywhen brakepedalispressed if the keyisnotinignition and turned tothe ONposition.
OEMALARMINTERFACE
Thisfeatureisdesigned toDisarmand Re-armFactoryequipped securitysystemsinconjunction withremotestartand keyless entry
(ifneeded foryourvehicle).Thisfeaturewill maintainthe originalintegrityand securityofyourvehicle’sfactoryequipped systems
before, during, orafterremotestart.
NOTE:
When changing,charging,or jumpstarting the vehicle’sbatterywerecommend removing the mainpower fuses
located on the heavygauge REDwiresnear the remotestart module.

15
TRANSMITTERPROGRAMMING
Note: All transmittercodes must belearnedat timeofprogramming!! Theunitwill learnsup to4different
transmittercodes.
1.Open Hood (If no hood pininstalled withyour system, then you must ground the GrayHood pinwire).
2.Turn keytothe ONposition.
3.Press Programming button 4times, then after afewsecondsthe unit flashesthe parking lights4times.
4.Press button #1 &#2 together ofthe transmitter tobe coded.You shouldget2lightflashesindicating the unitis
waiting for a2nd code,then press button #1 &#2 ofasecond transmitter,the unitwill flash3timesindicating its
waiting for the 3rd code and soon.Ifall 4codesare learned,the unitwill automaticallyexitcode learning mode,
otherwiseturn keyoff and closehood. See diagrambelow.
IGN
OFF
WAITFOR
4FLASHES
PRESS4X's
FLASH2, 3,or4X's
(GRAYWIREGROUNDED)
IGN
OFF
1-WAY
PRESSTOGETHER

16
VEHICLE #2
Presssidebutton
first,thenyouhave
3secondsto
controlvehicle#2.
1WAYSIDEKICKREMOTE
2-VEHICLEOPERATION
Asingleremote cancontrol two differentvehicles EZEE Start
systems installed. However, both systemsmust be the same
type. EZ-64TW1/1704TW2 is not compatible with EZ-
84FM/95FM.
Programming:
You mustfirstProgramming yourremotefor
2nd vehicleoperation:
(2nd Vehicle Programming and Operation instruction):
1 Waysidekick remote
Instep #4 of transmitter programming(see page 15) press side
buttonfirst, thenyouhave 3seconds to press lock andunlock at
thesame time, parkinglightwill flashindicatingtheremote is
programming.
Operation:
Press thevehicle#2 side buttononyourremote first andwithin
3seconds press anyof the4functionbuttonsonyour remote.
Youcankeep pressingfunctionbuttonsto control car #2 as long
as itiswithinthe3-secondwindow. After 3seconds have
elapsed, the remote will revert back to Car #1 operation.
1 Way5 button sidekick remote
In step #4 of transmitter programming(see page 15) press and
holdmiddle button#5 for 2 sec., thenpress lock and unlock at
thesame time, parkinglightwill flashindicatingtheremote is
programming.
Operation:
Press vehicle#2 button(middlebutton)for 2 sec. and within3
seconds press anyof the4functionbuttonsonyourremote.
Youcankeep pressingfunctionbuttonsto control car #2 as long
as itiswithinthe3-secondwindow. After 3seconds have
elapsed, the remote will revert back to Car #1 operation.
START
EZSTART
VEHICLE2
Press Middle
Button for2seconds,
Thenyou have3
secondsto
Control vehicle#2

17
2-VEHICLEOPERATIONCont.
L.E.D Two-wayRemote
Instep #4 of transmitter programming(see Page 15), press andholdtheside buttonontheLED remote for 5seconds. The
unitwill beep 2times andayellow LED will flash (now you are in 2nd vehicleoperation mode). Press thelock andunlock
buttonat the same time onthe LED remote, your vehicle should be programmed for the 2nd vehicle.
Operation:
Press thecar vehicle#2 side buttononyourremote for 5 seconds to enter 2nd vehicle mode, press any of the 4 function
buttonsonyourremote. Youcankeep pressingfunctionbuttonsto controlcar #2 as longas itiswithinthe18-second
window. After 18 seconds have elapsed, the remote will revert back to Car #1 operation.
LCD Two-wayRemote
Instep #4 of transmitter programming(see Page 15), press andholdtheside buttonontheLCD remote for2seconds. The
unitwill beep 1time anda2will display onthescreen(now youare in2nd vehicle operationmode). Press the lock and
unlock buttonat the same time onthe LCD remote, your vehicle should be programmed for the 2nd vehicle.
Operation:
Press thecar vehicle#2 side buttononyourremote for 2seconds to enter 2nd vehiclemode, a2will display onthe screen.
Youare now in2nd vehiclemode. To returnto vehicle1, repeat previous steps and a 1 will display indicating youare in
vehicle 1 mode.
TROUBLESHOOTING:“BEFOREYOUCALL”SECTION
UNITWILL NOTATTEMPTASTART(KEYLESS ENTRYSTILL FUNCTIONSNORMALLY):
The unitisinValetmode.Turn Ignition ON,press and holdvalet/programming button for 6secondsthen turn key
off. Unitisnowoutofvaletmode and shouldperformaremotestart. IfoptionalLEDindicator isinstalled,then it
will be on solidwhen inValet and OFF when out of Valet.
UNITFLASHES LIGHTSONCEAND WILL NOTATTEMPTASTART:
The unit sensesafault at the Brake(Purplewire isactive) or the Hood isOPEN(Graywire grounded). Thisisa
safetyfeature ofthe unit. Checkinstallation for faultsand makesure hood isclosed and latched and brakewire is
not active. Makesure hood isingood condition and isdepressed when hood isclosed.

18
TROUBLESHOOTINGcont.
NO RESPONSE FROMREMOTETRANSMITTERS:(4 Parts)
1.Checkfor proper power/ground wiring connectionsat module.
2.CheckAntenna Moduleconnection. The antenna moduleincluded withthissystemmust be plugged in.
3.Transmittersmayneed tobe programmed tothe unit. See transmitter programming stepson Page 15.
4.Checktransmitter Batteriesand replaceif necessary.
UNITCRANKSVEHICLEBUTENGINENEVERSTARTS:(2 parts)
1.Inextremecoldor severe weather conditions,the unitmaytakemore than the firstattempttostartthe vehicle.
The remotestart unit will makeup to3attemptstostart the engine.
2.Insomevehicles,there maybe aFactoryanti-theft systemthatwill notallowthe engine torun withoutthe keyin
the ignition.Thesesystemsmayinclude FactorySecurityModules,GMPasskey®/Passlock®,and RF
Transponder systems(Ford P.A.T.S.®).Manylate1990’sthrough 2005 vehiclesinclude sometype ofAnti-
Theft systemwhichmayrequire abypass module.Checkwithyour installer tomakesure thatthe bypass device
(if equipped) isfunctioning properly.
SYSTEMISUNSUCCESSFULATREMOTESTARTDURING EXTREMECOLDCONDITIONS:
Pleasebe aware thatduring sub-freezing conditionsyour remotestarter maytakemore thatone attempttostartor it
maynotsuccessfullystartthe vehicleafter 3attempts.During theseconditionsthe vehiclemaynotproperlystart
even using the key; therefore trying tostart bythe remotewouldalsobe unsuccessful.
VEHICLESTARTSBUT“CHECK ENGINE”LIGHTCOMES ONORENGINERUNSBADLY:(2 parts)
1.Many1995-UPGeneralMotorscars/trucksrequire asecondaryignition circuit for the Transmission computer
and other on board systems.Ifthe vehicleisstarted withoutthiswire energized,there maybe a“CheckEngine”
or “ServiceEngine Soon” lighton the dash.Thismaycausedamage ifthe vehicleisdriven inthiscondition.
Checkwithinstaller tosee if thiscircuit ispresent and hasbeen properlyconnected tothe system.
2.Insomecases[commonlyNissan vehicles], an additional“Start”(Cranking) circuitisrequired for the vehicleto
run properly.The EZEE Startsystemincludesawire thatcan be used for thisStarter #2 circuit. Checkwithyour
installer for details.

19
LOWBATTERY
WARNING
LOW BATTERYWARNING- LCD REMOTE(EZ-64TW1/EZ-74TW2)
EZ-64TW1(LEDsystem): When the batteryislowthe orange and green LEDflash6times
withanybutton pressed.
EZ-74TW2/EZ-84FM/95FM(LCD SYSTEM): When the batteryislow,alowbatteryicon
turnson. Werecommend replacing the batteryfor proper operation.
REPLACING THEBATTERY
REPLACING THEBATTERY
Toreplacethe batterysimplyunlockand slide toopen the batterydoor on the backofLCD remote.Carefully
removethe lowbattery.Then insertanewbattery(AAA)using the outline on the bottomofthe batterycompartment
asaguide.
EZ-64TW1
Pager will beep 3timeswhen newbatteryisinserted correctly.
EZ-74TW2
Pager will beep 3times, vibrateand light up screen when newbatteryisinserted correctly.
EZ-84FM/95FM: Pager will light up screen then beep once. When anewbatteryisinserted correctly.
Note: If the remotedoe not beep or respond you must reinsert batteryagain.

SETTINGTHECLOCK (2-WAY- LCD REMOTE)
EZ-74 TW1
1.Press the Recall button #5 on the side of the remotecontrol5times.
2.The remotewill beep and the AMorPM displaywill beginflashing.
3.Press the Lock button #1 to increase time.
4.Press the Unlock button #2 to decrease time.
5.Press the Trunk button #3 togo tothe next item –AM-PM-Hour-Minutes.
6.Press the Start button #4 to DisableorEnableBeep.
7.Press the Recall button #5 to ExitSetup orwait 7seconds, the LCD light will turnoff.
EZ-84FM/95FM
1.Press and holdall 4buttonsof remotecontrolforapproximately3secondsuntil remotebeeps.
2.The minutedisplaywill beginflashing.Usethe lock and unlock button tochange the minuteup ordowntothe correcttime
and then press button #3 (Trunk)toset the minutevalue.
3.The hourdisplayshouldbeginflashing.Usethe lock and unlock button tochange the hourup ordowntothe correctAMor
PMhour.
4.Oncethe correct timeisdisplayed, wait 6seconds, the remotewill beep twiceand the timeof dayisset.
www.crimestopper.com
[e-mail]
© 2005 CrimestopperSecurityProducts
ONLINETECHNICALSUPPORT
http://www.crimestopper.com/index3.html