CRIOCABIN ELISIR 200 User manual

INSTRUCTION
MANUAL
ELISIR

ELISIR
3
1. Introduction ......................................................................................................................................... 5
1.1 Introduction and purpose of the Manual ........................................................................................ 5
1.1.1 Use of this Manual ................................................................................................................... 5
1.2 Warranty conditions .......................................................................................................................5
1.3 Graphical conventions .................................................................................................................... 5
1.4 Personnel qualifications ................................................................................................................. 6
1.5 General warnings ........................................................................................................................... 6
1.5.1 To be arranged by the Customer .............................................................................................. 7
1.5.2 Technical assistance ................................................................................................................. 7
1.5.3 Spare parts ................................................................................................................................ 7
2. Information on safety .......................................................................................................................... 8
2.1 General regulations - Training ....................................................................................................... 8
2.2 General regulations - Skills and checks ......................................................................................... 8
2.3 Fire regulations .............................................................................................................................. 8
2.4 First aid regulations ........................................................................................................................ 8
3. Product specification ......................................................................................................................... 10
3.1 General description ...................................................................................................................... 10
3.1.1 Structural components. ........................................................................................................... 10
3.1.2 Control system ....................................................................................................................... 11
3.2 Technical characteristics .............................................................................................................. 12
3.2.1 Dimensions ............................................................................................................................. 12
3.2.2 Lay-out ................................................................................................................................... 14
3.2.3 Weight table ........................................................................................................................... 14
3.2.4 Admissible loads .................................................................................................................... 15
3.2.5 Refrigeration system: ............................................................................................................. 15
3.3 Noise level .................................................................................................................................... 15
3.4 Other emissions ............................................................................................................................ 15
3.5 Environmental requirements for operation .................................................................................. 15
3.6 Description of residual risks ........................................................................................................ 16
3.7 Specific protections ...................................................................................................................... 17
4. Instructions for commissioning ........................................................................................................ 17
4.1 Transport, handling and positioning ............................................................................................ 17
4.1.1 Precautions to be taken upon receipt of the product .............................................................. 17
4.1.2 Handling and positioning ....................................................................................................... 18
4.2 Unpacking and disposal of packaging materials .......................................................................... 19
4.3 Assembly ...................................................................................................................................... 20
4.4 Disassembly and subsequent reassembly ..................................................................................... 27
4.5 Fixing ........................................................................................................................................... 27
4.6 Installation .................................................................................................................................... 27
4.6.1 Connection to a remote condensing unit ................................................................................ 27
4.6.2 Connection to the mains ......................................................................................................... 27
4.6.3 Connection to the drain line ................................................................................................... 27
4.7 Commissioning ............................................................................................................................ 28
4.7.1 Setting .................................................................................................................................... 28
4.8 Idle time and restarting ................................................................................................................ 28

ELISIR
4
5. Instructions for use ............................................................................................................................ 28
5.1 Correct use of the cabinet ............................................................................................................. 28
5.2 Uses to be avoided ....................................................................................................................... 29
5.3 Working limits ............................................................................................................................. 29
5.4 Cabinet control functions ............................................................................................................. 29
5.4.1 Manual defrosting .................................................................................................................. 29
6. Maintenance instructions .................................................................................................................. 30
6.1 General warnings ......................................................................................................................... 30
6.2 Periodical cleaning ....................................................................................................................... 30
6.3 Periodical maintenance ................................................................................................................ 31
6.3.1 Check of the glass lifting system ........................................................................................... 31
6.4 Special maintenance ..................................................................................................................... 31
6.5 Troubleshooting ........................................................................................................................... 31
7. Instructions for demolition and disposal ........................................................................................... 31
8. Attachments ...................................................................................................................................... 32
8.1 Reference to manuals of other suppliers ......................................................................................32
8.2 Declaration of conformity: as attached ........................................................................................32

ELISIR
5
1. Introduction
1.1 Introduction and purpose of the Manual
Thank you for choosing Criocabin S.p.a., hereinafter referred to as the Manufacturer. We are glad to
have you as our Customer and hope you will be fully satisfied with this product.
This Use and Maintenance Manual is an integral part of the product and is aimed at anyone
who works on the product or interacts with its users.
The purpose of this Manual is to supply the necessary information to enable:
quick identification of the product parts;
all the commissioning, functioning and maintenance operations to be carried out on the
product;
the health and safety of all users and exposed persons to be guaranteed at all stages.
All information, drawings, diagrams, tables and any other contents of this Use and Maintenance Manual
are confidential and therefore the full or partial reproduction or disclosure thereof to third parties is
subject to the authorisation of the Manufacturer in its capacity as sole owner.
1.1.1 Use of this Manual
Read this manual before handling, installing and using the product, and likewise before carrying out
any maintenance work on it.
The term Manufacturer will always be used to indicate Criocabin S.p.a., while the generic term Supplier
will be used to indicate other manufacturers of specific components fitted in the product.
The term Dealer will be used to indicate the company that, according to a distribution agreement
signed with the Manufacturer, is authorised to sell the product and constitutes the Customer’s
commercial counterpart.
Keep this manual away from sources of heat, dampness and corrosive agents throughout the product
working life, pass it on to any other user or subsequent owner and keep it handy for easy reference by
its users.
Handle this manual with care; do not damage it, tear out pages or modify its content for any reason.
The Manufacturer reserves the right to communicate at any moment any information which is
considered necessary for a better and safer use of the product. Such information, provided as
modifications, updating or additions, will have to be considered in all respects as an integral part of this
manual.
1.2 Warranty conditions
Warranty conditions are stated in the sales agreement which is accepted by the Customer by means
of order confirmation.
1.3 Graphical conventions
Bold type is used to highlight information considered important.
References to illustrations are made by means of a number in bold type that identifies the illustration
(i.e. Fig. 1) and, if necessary, by means of a letter or number that identifies the component in question

ELISIR
6
within the illustration. Illustration references and component references may be used at the same time
(i.e. A - Fig. 1 or 1 - Fig. 1).
The following graphical symbols are used in this Manual to draw users’ attention to information
concerning proper and safe use of the product:
Additionally, the graphical symbols listed below are employed in this manual to show the Personal
Protective Equipment which must be worn when installing, using and maintaining the product.
The symbol for each safety device will be found whenever a specific operation requires use of said
device.
1.4 Personnel qualifications
Here follows a description of the type of personnel to whom this Manual is addressed.
1.5 General warnings
All the indicated safety regulations must be strictly observed by the users of the product.
The instructions written on this Manual will be the object of a training activity given by the Dealer’s
technical personnel during installation. The Customer will be responsible for selecting, inside their
organisation, the people to whom such training activity is addressed and for checking that the trained
personnel have reached a learning level which is apt for the tasks assigned to them.
The diagrams enclosed in this Manual are to be used only for extraordinary maintenance and controls.
NOTE!
This symbol is used to highlight a piece of information or advice, or a rule whi-
ch is considered particularly important.
CAUTION!
This symbol is used to point out a dangerous operation or situation.
PROHIBITED OPERATION!
This symbol is used to indicate a prohibited operation.
PERSONAL PROTECTIVE EQUIPMENT
This symbol indicates that it is compulsory to wear protective gloves during
operations marked by this symbol.
Qualified
The Qualified Technician is a specialised technician who is supplied by the Customer or
by the Dealer and is authorised, under different circumstances, to carry out operations
such as assembly, disassembly, installation, set-up, start-up, maintenance and repair.
!

ELISIR
7
1.5.1 To be arranged by the Customer
Provided for otherwise by special contractual conditions, the Customer is responsible for
arranging the following:
selecting the people to whom the training on the product use is addressed;
arranging a suitable place for product installation;
checking that the received product corresponds to the order specifications;
carrying out all the activities described in the present manual, except where expressly indicated
otherwise.
1.5.2 Technical assistance
The Customer may require technical assistance by contacting directly the Dealer’s Customer Service
according to the ways specified in the Sales Agreement.
1.5.3 Spare parts
Drawing, references, descriptions and serial numbers for the identification of all the mechanical parts
are listed in the section Spare Parts.
With regard to the electrical and electronic equipment, please refer to the electrical diagrams 1 and 2.
Note!
It is strictly forbidden to use them to carry out modifications on the product.
Possible modifications are to be required directly to the Dealer, specifying all
the product technical features and the reasons for such modifications; if
approved, modifications must be carried out only by the Manufacturer’s
personnel or by authorised personnel.
Note!
Any non-authorised tampering/replacement of one or more parts or units of the
product may cause accidents and exempt the Manufacturer from civil and
criminal liability.
Note!
The Customer must always use original spare parts supplied by the Manufacturer.
The Manufacturer cannot be held responsible for any damage or injury or any other in-
convenience arising from the use of non-original spare parts.
Note!
When ordering new spare parts, always quote the model and serial number of
the product for which the spare parts are required.

ELISIR
8
2. Information on safety
2.1 General regulations - Training
It is recommended that any person who interacts with the product reads this Manual completely
before starting to operate.
Negligence or failure to comply with these safety regulations while using and maintaining the
product may cause accidents for which the Dealer and the Manufacturer are not responsible.
Finally, it is hereby reminded that according to the provisions of the law in force:
2.2 General regulations - Skills and checks
Only qualified and authorised technical personnel can install, set and carry out extraordinary
maintenance on the product.
The product has been designed only for holding food and shall not be used for any other
purpose.
Always use the Personal Protective Equipment when recommended.
Arrange fire-fighting equipment adequate to the product technical features.
2.3 Fire regulations
2.4 First aid regulations
The following first aid regulations concern the treatment of injuries that could be caused by the
refrigerant fluid.
Note!
Workers must follow the orders and instructions given by the employer.
Warning!
When put in contact with free flames, the refrigerant fluid undergoes a thermal decom-
position into a caustic and poisonous substance.
Avoid exposition to sparks and sources of inflammation.
!

ELISIR
9
Warning!
If a refrigerant fluid comes into contact with eyes:
do not rub the eyes;
remove contact lens;
rinse thoroughly for at least 20 minutes.
If a lubricant comes into contact with skin:
wash the skin with a great quantity of water for at least 20 minutes;
leave the skin uncovered.
If a lubricant is swallowed:
drink as much water as possible.
In all the above cases, bring the injured person to the nearest medical facility.
Note!
For further details, refer to the "Safety data sheet" of the refrigerant fluid.
!

ELISIR
10
3. Product specification
3.1 General description
The product described in this manual is a display cabinet, hereinafter called "cabinet", multiplexable,
in standard sizes, whose intended use is to display food sold:
3.1.1 Structural components.
ELISIR 200 / 220
Multiplexable.
Anti-fogging front ventilation.
Thermostatic refrigeration valve.
Ventilated refrigeration with pre-painted evaporator.
Condensate collection tank.
Satin-finished steel display surface.
Stainless-steel unit interior.
Paper holder ’comfort’ type in stainless steel.
Electronic panel.
Three refrigerated intermediate shelves rear sliding doors.
Glass top surface.
Superstructure with front uprights with upward-opening square glass.
Cabinet lighting with lamp protection.
Ventilated defrosting with compressor block.
Personalised front.
Perimetrical bumper skirting.
ELISIR 340
Multiplexable.
Anti-fogging front ventilation.
Thermostatic refrigeration valve.
Ventilated refrigeration for preservation chocolate.
Condensate coflection tank.
Satin-finished steel display surface.
Stainless-steel unit interior.
Paper holder ’comfort’ type in stainless steel.
Electronic pane!.
Three refrigerated intermediate shelves.
Rear sliding doors.
Glass top surface.
Superstructure with front uprights with upward-opening square glass.
Cabinet lighting with lamp protection.
Ventilated detrosting with compressor block.
Personalised front.
Perimetrical bumper skirting.

ELISIR
11
ELISIR 840
Multiplexable.
Anti-fogging front ventilation.
Thermostatic refrigeration valve.
Ventilated refrigeration with pre-painted evaporatof.
Condensate collection tank.
Satin-finished steel display surface.
Stainless-steel unit interior.
Paper holder ’comfort’ type in stainless steel.
Electronic panel.
Three refrigerated intermediate shelves.
Glass top surface.
Front sliding doors
Cabinet Iighting with lamp protection.
Ventilated defrosting with compressor block.
Personalised front.
Perimetrical bumper skirting.
3.1.2 Control system
It is performed through control units.
For specific instructions on its use, refer to the enclosed "Control unit instructions for use" .

ELISIR
12
3.2 Technical characteristics
In this manual all dimensions in the technical drawings are given in millimeters (mm).
3.2.1 Dimensions
Fig. 1 Dimensions Elisir 200 220 340

ELISIR
13
Fig. 2 Dimensions Elisir 840

ELISIR
14
3.2.2 Lay-out
3.2.3 Weight table
Fig. 3 Lay-out
Lenght A (mm) B (mm)
937 284 245
1250 284 245
2500 284 245
Cabinet length (mm) 937 1250 2500
Weight (kg) (refrigeration
unit included)
135 160 260
Weight (kg) (refrigeration
unit not included)
105 130 230
= QUADRO ELETTRICO
= SCARICO ACQUA
= TUBO GAS

ELISIR
15
3.2.4 Admissible loads
As for the cabinet admissible loads, refer to the following table:
3.2.5 Refrigeration system:
As for the refrigerant fluid characteristics, refer to the enclosed "Refrigerant fluid safety data
sheet".
Unless requested by the Customer, our cabinets use as refrigerant "R404 a".
3.3 Noise level
Tests performed by the Manufacturer have shown that the noise level ranges from 55 to 57 dBA in
compliance with the EU Directive no. 89/392/EEC.
Noise level depends also on room temperature and, as for cabinets "with refrigeration unit", on the
condensing unit cleaning level.
3.4 Other emissions
3.5 Environmental requirements for operation
To maintain the refrigerating cabinet in good working conditions check that the cabinet temperature
class corresponds to that of the room where the cabinet has been installed (see rating plate).
To maintain in good conditions cabinets provided with a refrigerating unit, act as follows:
guarantee air exchange in the room, even at floor level, also when the sales outlet is closed;
do not obstruct the condensing unit air outlets by placing products or materials around the
cabinet.
In case of cabinets "without refrigeration unit", act as follows:
locate the remote condensing unit in a place sheltered from the atmospheric agents.
In any case, act as follows:
install the cabinet avoiding exposure to direct sunlight and to any other source of heat such as
high-intensity incandescent lighting, ovens or heat-emitting bodies such as radiators;
position the cabinet away from doors, windows, air-conditioning outlets to avoid air flows
exceeding 0.2 m/s.
COMPONENTS LOAD
Top canopies, alluminium max kg 20/m
Top canopies, glass max kg 8/m
Intermediate shelves max kg 8/m
Display surfaces max kg 95/m
Warning!
Refrigerant R404a leaks are possible.
!

ELISIR
16
The cabinet operating room temperature is 25 °C ± 1 °C. The environment humidity shall be 60% ±
3%.
3.6 Description of residual risks
Note!
A room temperature rising and/or a lack of air to the condensing unit not only increases
energy consumption but also reduces the cabinet technical performances and may lead
to the deterioration of displayed products.
Warning!
DANGER OF CUTTING
When cleaning the cabinet tray, after having removed the display shelves, be careful not
to injure yourself on the evaporator fins as they may be sharp due to their reduced thi-
ckness.
When cleaning the condensing unit of cabinets provided "with a refrigerating unit", be
careful not to injure yourself on the condensing unit fins, as they may be sharp due to
their reduced thickness.
PERSONAL PROTECTIVE EQUIPMENT
It is compulsory to wear protective gloves when performing the above men-
tioned cleaning operations.
Warning!
DANGER OF BURNS
In case of cabinets provided with electric defrosting, be careful not to get burnt by the
heater, as this may still be hot.
In case of infrared lamp heated cabinets, be careful no to get burnt by hot parts.
Warning!
DANGER OF CRUSHING
Cabinet front glasses open by means of piston system. Pistons act as a lifting back-up
and prevent the glass from accidental and unexpected falling.
To avoid danger of crushing, check periodically the system efficiency and check if the ef-
fort required to lift the glass is increasing, as this will indicate a reduced efficiency of the
lifting system.
Warning!
DANGER OF GLASS BREAKING
All movable glasses are hardened and, if broken, fragment in pieces not longer than 3cm,
thus reducing the risk of damaging people.
During the normal use of the cabinet glasses are lowered, thus avoiding any danger of
breaking due to glass falling.
To store goods and for cleaning purpose glasses are lifted and kept open thanks to the
lifting system.
!
!
!
!

ELISIR
17
3.7 Specific protections
Normally, the refrigeration system components and the control panel are not accessible. They are
sheltered by means of panels placed on the cabinet rear side.
4. Instructions for commissioning
4.1 Transport, handling and positioning
4.1.1 Precautions to be taken upon receipt of the product
The Manufacturer supplies the cabinet ex-works. Before delivery to the carrier, the material, subject
matter of the supply contract, shall be carefully inspected by the Manufacturer.
The Manufacturer cannot be held responsible for missing parts or damage to parts that might occur
after delivery to the carrier.
Prohibition!
Except when special maintenance is performed, it is forbidden to remove the panels or
use the cabinets when the panels have been removed or are open.
Note!
The cabinet components are usually packed; non-packed components have to
be covered during transport.
All loose components that might move during transport must be firmly secured.
Note!
Upon receipt of the cabinet, the Customer shall act as follows:
Check that the supplied material corresponds to the order specifications.
Check that the cabinet has not been damaged during transport, that the
packaging, if any, has not been tampered with and that no part is missing.
In case of damage or missing parts, immediately inform the carrier and the
Manufacturer producing photographic proof.

ELISIR
18
4.1.2 Handling and positioning
Unless otherwise specified, the Customer is responsible for the above mentioned
operations.
To handle the cabinet use a forklift truck of suitable capacity. Refer to the gripping-lifting areas shown
in the picture below.
Check the correct balancing of the cabinet before lifting it completely.
Lifting has to be smooth (avoid jerks and jolts).
Make sure that the cabinet has been positioned completely flat. If necessary, adjust the feet screws
and check the position of the cabinet with a spirit level. The cabinet must be placed on a completely flat
surface to ensure correct operation, to drain any condensing water and to avoid noisy vibrations from
the motor.
In case of cabinets provided with a condensate collection tank, make sure that the collection tank has
been positioned so that to allow the connection of the relative drainage pipe to the hydraulic system.
Fig. 4 Handling ELISIR
Note!
It is recommended to move the cabinet only by means of a pallet.

ELISIR
19
4.2 Unpacking and disposal of packaging materials
Unless otherwise specified, the Customer is responsible for the operations mentioned
below.
Remove the packaging only after having positioned the unit.
Packaging must be disposed of in compliance with the laws in force.

ELISIR
20
4.3 Assembly
Unless otherwise specified, the Customer is responsible for the operations mentioned
below.
ELISIR UNIT CONNECTING KIT
Fig. 5 Elisir multiplexing kit
RIF. 4 C50001680
VITE M6 X 16 TCEI IX
2 PZ
CANALIZZAZIONE TRA BANCO E BANCO - MULTIPLEXATION BETWEEN CABINET AND CABINET -
CANALISATION VITRINE ET VITRINE - ZUSAMMENBAUSATZ ZWISCHEN THEKE UND THEKE
RIF. 1 C50008380
VITE M6 X 50 TE IX
3 PZ
RIF. 2 C50001880
DADO M6 ZN
6 PZ
RIF. 5 CP0002666
SUPP.MENSOLE CANALIZ
RIF. 6 C50005590
VITE M5 X 12 TBEI IX
2 PZ
SPUGNA ADESIVA
2 PZ
KIT 1
RIF. 7 C70099120
COP.FIANCATINE X CANALIZ
1 PZ
1 PZ
RIF. 8 C50002170
ROSETTA ZN X M6
6 PZ
RIF. 3 C50001040
VITE M6 X 100 TE ZN
1 PZ