CRL LLPA User manual

LLPA, LLPUA, DLLPA
LOCKING LADDER PULLS
LOCK INDICATOR
crlaurence.com
INSTALLATION INSTRUCTIONS
C.R. Laurence Co., Inc. • 2503 E. Vernon Ave., Los Angeles, CA 90058 •1.800.421.6144 •crlaurence.com
11M0326_LLPA, LLPUA,DLLPA_04-2023

CRL LOCKING LADDER PULLS LOCK INDICATOR
C.R. Laurence Co., Inc. • 2503 E. Vernon Ave., Los Angeles, CA 90058 •1.800.421.6144 •crlaurence.com
P. 2
LOCK INDICATOR INSTALLATION
1. Turn the thumb turn counter clockwise.
2. Remove the assembly bolt and the two lock housing screws that secure the thumb turn assembly in the
lock housing, set these aside for later use during the installation of the Lock Indicator. Remove the
thumb turn assembly.

CRL LOCKING LADDER PULLS LOCK INDICATOR
C.R. Laurence Co., Inc. • 2503 E. Vernon Ave., Los Angeles, CA 90058 •1.800.421.6144 •crlaurence.com
P. 3
3. Insert the Lock Indicator thumb turn as shown below and secure it to the lock housing with the two lock
housing screws.
4. Turn the thumb turn counter clockwise and insert the assembly bolt.

CRL LOCKING LADDER PULLS LOCK INDICATOR
C.R. Laurence Co., Inc. • 2503 E. Vernon Ave., Los Angeles, CA 90058 •1.800.421.6144 •crlaurence.com
P. 4
5. Turn the thumb turn clockwise as shown below, make sure to check if the door is in the open or locked
position and slide the indicator accordingly over the thumb turn.
6. Slide the indicator cover over the thumb turn.

CRL LOCKING LADDER PULLS LOCK INDICATOR
C.R. Laurence Co., Inc. • 2503 E. Vernon Ave., Los Angeles, CA 90058 •1.800.421.6144 •crlaurence.com
P. 5
NOTE:
THE INDICATOR
IS REVERSABLE
IF REQUIRED.
7. Secure the cover to the thumb turn using the two cover screws.