Crosley iSOLO CR3009A User manual

CR3009A
iSOLO
In truction
Manual
All manuals and user guides at all-guides.com
all-guides.com

All manuals and user guides at all-guides.com

iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
All manuals and user guides at all-guides.com

Welcome
Thank you for purchasing the Crosley Radio iSO O Tabletop
Receiver. Before operating this unit, please read this manual
thoroughly and retain it for future reference.
Features
AroundSound™- Your Crosley iSolo features our exclusive
AroundSound design. Using a single, custom - designed driver, the
iSolo radio simulates surround sound, creating a warm, ambient
tone, regardless of where you may be located with regards to the
radio.
Portable Audio Ready - Your iSolo radio comes ready to play
portable audio products, including mp3 players, satellite radio, gaming
devices, cd players, walkmans, - basically anything with a headphone
jack!
About This Manual
Instructions in this manual describe the controls and functions of the
iSO O.
Table of Contents
Getting Started
Control ocators 4
Connector ocators 5
Unpacking 6
Set Up 6
Basic Operation
AM/FM Radio 7
Portable Audio Ready 7
Auxillary Output 7
iPod/iPhone Operation 8
General
Troubleshooting Guide 9
Warranty Information 10
All manuals and user guides at all-guides.com

Control ocators
1. Tuner Dial
2. Function Knob
3. Power Indicator
4. Tuning Knob
5. Volume Knob
6. Tuning ED
1
2
3
4
5
6
Getting Started
4
All manuals and user guides at all-guides.com

CONTRO OCATORS
1. Antenna
2. Power Jack
3. Aux IN
4. ine OUT
1
2
3
4
Getting Started
5
All manuals and user guides at all-guides.com
all-guides.com

Getting Started
Unpacking
1. Remove packing material from unit.
Note: Save all packing materials.
2. Remove plastic bag covering radio.
3. Remove ties from AC to DC power adaptor.
4. Remove supplied audio cable from plastic bag.
Note: Save cable for portable audio component hookup.
Set Up
1. Unwind the AC to DC power adaptor.
2. Plug AC end of the power cord into appropriate outlet.
3. Plug the small end of the power adaptor into
the Power Jack in the back of the unit.
6
All manuals and user guides at all-guides.com

Getting Started
AM/FM RADIO
1. Turn the Function Knob to the desired tuning band.
The Power Indicator will turn green to indicate the power
is turned on.
2. Rotate the Tuning Knob to select the desired station.
The Tuning ED will appear brightest when the best signal is
reached. Some weaker but listenable AM stations may not
turn on the Tuning ED.
3. Adjust the volume to the desired level by rotating the Volume Knob.
4. Position the antenna for optimum reception.
PORTAB E AUDIO READY
1. Turn the function knob to “AUX”. Turn the volume to a lower level.
2. Using the supplied male to male mini pin connector, connect
one end to the AUX OUTPUT jack on the back of the unit.
3. Turn on your portable audio device and set the volume
on the device to approximately 10% of full volume.
4. Plug the other end into an output or headphone jack on your
external device.
5. Begin playback on your external device.
Adjust the volume to your desired listening level on your iSO O.
For more volume, increase the setting on your portable device.
Auxillary OUTPUT
The Auxillary Output feature is designed to let you use your iSO O
as an audio source for other components.
1. Using the supplied mini pin connector, connect one end to the
OUTPUT JACK (auxiliary output), on the back of your iSO O.
2. Plug the other end into an auxiliary input jack on the desired
component.
Note: If the desired component does not have a mini pin input
jack, a separate cable will be needed.
7
All manuals and user guides at all-guides.com

Getting Started
Auxillary OUTPUT cont.
3. For information on using the auxiliary input feature of a specific
component, refer to the auxiliary input section in the instruction
manual of the desired component.
4. Turn the Function Knob to select the desired output; AM, FM,
or AUX.
Note: You can still listen to your iSO O while using the aux out
feature.
iPod/iPhone OPERATION
1. Insert the correct dock adapter (suppllied with your iPod or iPhone)
that fits your iPod/iPhone. Your iPod/iPhone should fit snugly into
the correct adapter. Gently press the adapter until it snaps firmly
into place.
2. Place your iPod/iPhone into the dock. Your iPod/iPhone will
begin charging
3. Turn the Function Switch to the iPod position.
4. Browse your iPod/iPhone to select a song or playlist and
press play.
5. Adjust the volume to the desired listening level by turning the
Volume Knob.
6. To remove the dock adapter, push your fingernail into the
slot in the back of the adapter and lift up.
8
All manuals and user guides at all-guides.com

Troubleshooting Guide
There is no power
1. Make sure AC to DC power cord is plugged in
at the wall and at the back of the unit.
2. Check that the Function Knob is not in the OFF position.
There is no sound
1. Make sure the Function switch is not in the AUX position.
The sound is distorted.
1. Adjust the tuner and/or antenna to improve the
signal strength. Under certain circumstances, the
reception may be improved by relocating the unit.
2. When using the “Aux in” plug, turn off any EQ settings
on the portable device.
3. Check the volume level of external device if listening to auxiliary input.
It should be set as low as possible.
Getting Started
9
All manuals and user guides at all-guides.com