Crosley KEEPSAKE CR249 User manual

KEEPSAKE USB Turntable
CR249
27-6-07
27-6-07
Instruction Manual
910-264500-0010-100

1
IMPORTANT SAFETY INSTRUCTION
PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS
THAT ARE APPLICABLE TO YOUR EQUIPMENT
1. Read Instructions - All the safety and operatin instructions should be read before the product is operated.
2. Retain instructions - The safety and operatin instructions should be retained for future reference.
3. Heed Warnin s - All warnin s on the product and in the operatin Instructions should be adhered to.
4. Follow Instructions - All operatin and use instructions should be followed.
5. Cleanin - Unplu this product from the wall outlet before cleanin . Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleanin .
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimmin pool; and the like.
8. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the product and cart combination to overturn.
9. Ventilation - Slots and openin s in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from overheatin , and these openin s must not be blocked
or covered, The openin s should never be blocked by placin the product on a bed, sofa, ru , or
other similar surface. This product should not be placed in a built - in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. Power Sources - This product should be operated only from the type of power source indicated on the markin label,
if you are not sure of the type of power supply to your home. Consult your product dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the operatin instructions.
11. Groundin or Polarization - This product may be equipped with a polarized alternatin -current line plu (a plu havin
one blade wider than the other). This plu will fit into the power outlet only one way. This is a safety feature. If you
are unable to insert the plu fully into the outlet try reversin the plu , If the plu should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plu .
12. Power - Cord Protection - Power - supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or a ainst them, payin particular attention to
cords at plu s, convenience receptacles, and the point where they exit from the product.
13. Li htnin - For added protection for this product durin a li htnin storm, or when it is left
unattended and unused for lon periods of time, unplu it from the wall outlet and disconnect
the antenna or cable system. This will prevent dama e to the product due to li htnin and power - line sur es.
14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric
li ht or power circuits, or where it can fall into such power lines or circuits. When installin an outside antenna system,
extreme care should be taken to keep from touchin such power lines or circuits as contact with them mi ht be fatal.
15. Overloadin - Do not overload wall outlets, extension cords, or inte ral convenience receptacles as this can result
in a risk of fire or electric shock.
16. Object and Liquid Entry - Never push objects of any kind into this product throu h openin s as they may touch
dan erous volta e points or short - out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the product.
17. Servicin - Do not attempt to service this product yourself as openin or removin covers may expose you to dan erous
volta e or other hazards. Refer all servicin to qualified service personnel.
18. Dama e Requirin Service - Unplu this product from the wall outlet and refer servicin to qualified service personnel
under the followin conditions;
a. When the power-supply cord or plu is dama ed.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by followin the operatin instructions. Adjust only those controls that
are covered by the operatin instructions as an improper adjustment of other controls may result in dama e and
will often require extensive work by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or dama ed in any way.
f. When the product exhibits a distinct chan e in performance - this indicates a need for service.
19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the ori inal part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operatin condition.
21. Wall or ceilin Mountin - The product should be mounted to a wall or ceilin only as recommended by the manufacturer.
22. Heat - The product should be situated away from heat sources such as radiators. Heat re isters, stoves, or other
products (includin amplifiers) that produce heat.
WARNING: Chan es or modifications to this unit not expressly approved by the party responsible for compliance could
void the users authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B di ital device, pursuant to Part
15 of the FCC Rules. These limits are desi ned to provide reasonable protection a ainst harmful interference in a residential
installation. This equipment enerates, uses, and can radiate radio frequency ener y and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no uarantee
that interference will not occur in a particular installation. If this equipment does cause harmful intereference to radio or
television reception, which can be determined by turnin the equipment off and on , the user is encoura ed to try to correct
the interference by one or more of the followin measures:
- Reorient or relocate the receivin antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio TV technician for help.
AC
Polarized Plu
8
WARRANT
Crosley Radio Products are warranted a ainst defects in material and
workmanship for a period of 90 days be innin from the date of sale to the
ori inal purchaser.
Should the unit fail under normal usa e durin the 90 day warranty period, a
request for RETURN AUTHORIZATION (R.A.) must be made by the ori inal
customer before returnin the unit. Call Crosley Radio customer service for
Return Authorization at [phone] from 9 AM to 5 PM (EST) Monday to
Friday.
Upon receivin the RETURN AUTHORIZATION number from the Customer
Service Department, properly pack your unit in its ori inal packa in . Include
any adapters, parts, & accessories which were ori inally provided with the
product, alon with a check or money order for $19.95 made out to Crosley
Radio to cover the handlin and return posta e. Display the R.A. # on the
outside of the carton and ship PREPAID via standard UPS or its equivalent.
ATTN: RETURNS DEP'T
2001 PRODUCTION DRIVE
BAY 2 & 3
LOUISVILLE, KY 40299
CROSLEY RADIO assumes no responsibility for units sent without prior Return Authorization.
The purchasers bill of sale is the only proof of warranty entitlement and must accompany the unit.
The warranty does not cover dama e due to acts of nature, accident, misuse, abuse, ne li ence, commercial
use or modification of, or to any part of the product. This warranty does not cover dama e due to improper
operation or maintenance, connection to improper volta e supply, or attempted repair by anyone other than
a facility authorized by Crosley Radio to service the product. This warranty does not cover products sold
AS IS or consumables (such as fuses or batteries). This warranty is valid only in the United States.
This warranty ives the purchaser specified le al ri hts in addition to any ri hts which may vary from state
to state.
In accordance with the "Moss-Ma nuson Warranty Act" of July 10, 1975, this is termed a "limited warranty"
which in no way compromises Crosley Radio hi h standards of Quality and Workmanship.

6
Usin the included software and cable, the USB
connection allows you record your records onto your
computer. Follow these instructions to use the USB.
1 Insert the enclosed software CD into your
computer.
2Follow the instructions on the computer screen
to install the software. If the software does not
load automatically, browse the CD and open
the Read Me folder for further instructions.
3Connect the small end of the USB cable to the
USB JACK (15) on the back of the unit.
4 Connect the other end to a USB port on your
computer.
5On your computer, open the Record Recordin
Software.
6 For instructions on operatin the Record
Recordin Software, browse the software CD
and open the Read Me folder.
Getting Starte
Unpackin ................................. 4
Power Source........................... 4
Control Locators....................... 5
Operation
General.................................... 6
USB/Recordin ........................ 6
General
Troubleshootin Guide............ 7
Warranty................................... 8
About This Manual
Thank you for purchasin the Crosley Keepsake
(CR249). Before operatin this unit, please read this
manual thorou hly and retain it for future reference.
Instructions in this manual describe the control
functions of the CR249.
Included in this packa e:
·Keepsake USB Turntable
·Record Recordin Software
·USB Cable
·45rpm Adapter
Welcome Table of Contents
3
Operation
Turntable Operation
1 Turn the unit on by rotatin the ON/OFF-
VOLUME KNOB (7) clockwise.
2 Set the SPEED CONTROL SWITCH (4) to
to the correct speed (33 1/3,45 or 78 rpm).
3 Place the record on the turntable.
4Use the CUE LEVER (2) to raise the tone arm
off its rest. Move the tone arm over the record
and use the cue lever to lower it onto the record.
The record will be in to turn automatically.
5At the end of the record, the tone arm will return
to its rest.
Accessory: ADAPTER FOR 45 RPM
This adaptor allows you to play 45 RPM records.
1 Place the 45 RPM adaptor over the spindle.
2 Gently place your 45 RPM record onto the
turntable.
3 Follow the steps under turntable operation to
play your record.
USB Operation

2
SPECIFICATION
Power Supply : AC adapter -(DC 12V 0.5A)(Included)
Power Consumption : 12W
Speed : 33
1/3
/ 45 /78 RPM
Speaker : 3 x 5 Dynamic Type x 2
Replacement Needle : NP4
 DESIGN AND SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The ighting f ash with arrowhead symbo , within an equi atera
triang e, is intended to a ert user to the presence of uninsu ated
"dangerous vo tage" within the product's enc osure that may be
of sufficient magnitude to constitute risk of e ectric shock to
persons.
The exc amation point within an equi atera triang e is intended
to a ert user to the presence of important operating and
maintenance (servicing) instruction in the iterature accompanying
the app iance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE. DO NOT REMOVE COVER. PILOT LAMPS SOLDERED
IN PLACE. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
910-264500-0010-100
7
The unit oes not operate.
1The AC Power cord is not connected. Make sure
it is connected to an AC outlet and the back of
the unit.
2The unit is not turned on : rotate the VOLUME
knob from the OFF position.
Turntable
No sound is comin from unit.
1The white protective needle cover was not
removed.
2The volume is not turned unit.
Tone arm will not move.
1Block tie-wrap was not removed from underneath
tone arm.
2Tone arm hold down clip was not released.
Needles are available for addititonal char es, please
call us at 1-800-926-7801 for assistance
www.crosleyradio.com
Troubleshooting
General

45
1Untie the wire on the AC ADAPTER (16).
2Plu the AC ADAPTER into appropriate wall
outlet.
3Plu the small end of the adapter into the
ADAPTER JACK (12) on the back of the unit.
Getting Started
Unpacking
1Remove packin materials from unit.
Note: Save all packin materials.
2Remove plastic ba coverin radio.
3Remove AC ADAPTER from packin .
4Remove tie from A/C ADAPTER.
5Open lid and remove styrofoam shippin
material from turntable.
6Remove black tie-wrap from under the tone
arm.
7Remove white protective needle cover by ently
pullin towards the front of the unit.
8Turn the TURNTABLE SUSPENSION SCREW
(31) clockwise until it is all the way down.Do
not force or over ti hten it. This allows the
turntable to float on its shock absorbers.
9Release tone arm hold down clip by ently
pushin to the ri ht. This will unlock tone arm
from its arm rest. Re-lock the hold down clip
when movin the unit to another location.
Power Source
1. Tone Arm
2. Cue lever
3. Power li ht indicator
4. Speed control switch
5. Security Hook
6. Tone Control
7. ON/OFF Volume Knob
8. Tone Arm Rest
9. Turntable
10. Adapter for 45 RPM records
11. Speaker
12. Adapter Jack
13. Aux In Jack
14. Aux In Phono on/off
15. USB Jack
16. AC Adapter
(placed in a white cardboard box inside
the styrofoam packa in )
10
11
11
16
13 15
12 14
Control Locators
Unit Controls
1
3
4
5
6
7
8
9
2