GAS GRIDDLE - MODEL: GR2G-GNP001-A2
- PLEASE read these instructions carefully before operating this appliance.
SAFETY
-Install your equipment in area well ventilated, to eliminate the gases generated by the combustion.
-It’s recommended to leave at least 15 cm of free space around the equipment.
-DO NOT install the equipment next to combustible materials.
-The installation has to comply to the safety standards.
OPERATION
- The equipment should be installed with a Gas Line Tap which can operates the inlet of gas.
- There is a Burner gas tap to adjust the power of the flame (turn 1/4 to maximum flame and turn 1/2
to minimum flame).
-Incorporated to the Tap there is a safety device that will let open the gas only if it is pressed and
turned counterclockwise.
- Before using the appliance for the first time, remove the protection coating with a damp cloth, grease
plate generously with butter or oil.
-To start the equipment do the following:
1. Be sure that the Burner Gas Tap is turned off.
2. Light a fire flame.
3. Open the Gas Line Tap.
4. Bring the flame next to the pilot burner until it lights.
5. Press and turn 1/4 counterclockwise the Tap Knob to light the main burner.
6. Let the Tap Knob in the maximum flame position for at least 20 minutes and the
equipment is ready for use.
7. Adjust the gas tap to operating desired temperature.
9. To turn off the burner turn the Tap Knob completely clockwise.
- Never allow excess of fat or oil to buildup as this will result in build-up of carbon on the plates, which
should be removed with a scraper.
-Appliance is provided with grease drawer that receives grease and food scraped residues.
-This appliance should be preheated before daily operation. Always allow 15 minutes preheat time
before loading griddle with food to give griddle surface time to saturate.
-To turn off your appliance turn the gas tap knob completely towards left.
CLEANING PROCEDURE
-Always ensure that the gas taps are in off position before cleaning.
-Try to scrape as much grease and residues from cooking surface as possible while the unit is still hot.
-After appliance has cooled, clean cooking surface and body using only a damp cloth. Never use
water jet or immerse appliance in water.
-Wipe off appliance with a dry cloth and wait at least half an hour before start operation again.
GR2G-GNP001-A2
INSTRUCTION MANUAL
CROYDON
CROYDON
The pictures/drawings are illustrations. All data can be changed without notification.
CROYDONMAQ INDUSTRIAL LTDA.
Estrada São Lourenço, 891 - Capivari
Duque de Caxias - RJ / Brasil - CEP 25243-150
Phone: 55 21 2777- 8100 / 55 21 2777-8106
