CTC Union IFC-1200 User manual

■Standard :
IEEE 802.3 10Base-T, 802.2u 100Base-TX, 100Base-FX,
Supports Full/Half Duplex
Maximum Transmission Unit is 1552 bytes in size.
■100Base-TX UTP Cable :
Cable type 100base-TX; Category 5 or better
Maximum cable distance : 100 meter (328 feet)
■Fiber Optic Connectors :
Connector type : SC, ST, FC
Multi-mode : 1310nm, 2km
Single-mode : 1310nm, 1550nm. 15/30/50/80/120km
Single Fiber : A type 1310nmTX/1550nmRX, B type 1550nmTX/1310nmRX 20/40/60/80km
■Power : DC 12 ~ 48VDC In for Power 1 and Power 2
■Relay Output(max)
Load Voltage: 40V(AC Peak or DC)
Load Current: 1.5A
Output Power: Dissipation: 1.8W
■Dimensions : 62.5 x 106 x 134.8 (W x D x H) mm
■Weight : 650g
■Certication : CE, FCC, LVD, RoHS
Environment
Standard for model : IFC-1200
Operating Temperature : 0°C ~ 60°C
Storage Temperature : -10°C ~ 70°C
Humidity : 0 ~ 90%, (non-condensing)
Wide Range for model : IFC-1200X
Operating Temperature : -40°C ~ 85°C
Storage Temperature : -40°C ~ 85°C
Humidity : 0 ~ 90%, (non-condensing)
Wide Range for model : IFC-1200X-1
Operating Temperature : -30°C ~ 85°C
Storage Temperature : -40°C ~ 85°C
Humidity : 0 ~ 90%, (non-condensing)
■
www.ctcu.com
www.ctcu.com
Industrial Fiber Media Converter
• Two ports 10/100Base-TX and one port 100Base-FX
• IFC-1200
• IFC-1200X
• IFC-1200X-1
User Guide
Panel Specications
Figure #1. Top and Front View of IFC-1200(X)
[email protected]
[email protected]
CTC Union Technologies Co.,Ltd.
www.ctcu.com
[email protected]
Description
The IFC-1200 is industrial grade ber media converter that provides
2-port 10/100Base-TX and 1-port 100Base-FX. The reliable hardware design is
suitable for keeping industrial automation application running continuously. Each
IFC-1200 media converter comes with two relay output alarms and two redundant
DC power inputs to help prevent damage and loss. The IFC-1200 media converter
is available in models that support operating temperatures of 0 to 60 degree C, or
Wide Range temperatures of -30°C ~ 85°C or -40°C to 85°C degree C.
Features
■2-port 10/100Base-TX to 100Base-FX
■Auto-Negotiation on two LAN port
■Auto MDI/MDIX
■Forward 1552 bytes (Max.) packets
■Supports Q in Q double tagged frame transparent
■Supports IEEE 802.1q Tag VLAN pass thru
■Support flow control (Pause)
■Supports Far End Fault
■Supports two Relay out, power or optical fiber failure alarm by relay output
Solid state relay, Arc-Free with no snubbing circuits
■Support DIN-Rail and Wall Mount
■-40°C ~ 85°C degree C Operating Temperature Range
■Supports Redundant dual DC power inputs
LED Indicator
Optic Fiber
LAN1
LAN2
DIP Switch
[email protected] www.ctcu.com V.: 1.0
■
Top View
PWR1 PWR 2 ALM
OPT
OPT
LAN1
LAN2
TX
RX
LAN1 LAN2
ON OFF
ALM1
ALM2
IFC-1200
Termial Connector 1
Termial Connector 2
Top View

Installation
www.ctcu.com[email protected]
www.ctcu.com
[email protected]
www.ctcu.com
[email protected]
Figure #2. Rear panel with DIN-Rail Kit of IFC-1200(X) Figure #3. Rear panel with Wall Mount Kit of IFC-1200(X)
Dip Switch Setting
ON
SW1
SW2
OFF
Terminal Connector 1
[email protected] www.ctcu.com V.: 1.0
Relay 1 alarm Enable Relay 1 alarm disable
Relay 2 alarm Enable Relay 2 alarm disable
LED State Status
Power 1 is on
Power 2 is on
Fault (Power or fiber failure)
Fiber Link/Act
LAN 1 Link/Act
LAN 2 Link/Act
Green
Green
Red
Green
Green
Green
1
2
3
4
5
6
ON
SW1
SW2
Pin 1 – Power 1 V+
Pin 2 – Power 1 V-
Pin 3 – Power 2 V+
Pin 4 – Power 2 V-
1
2
3
4
1
2
3
4
Terminal Connector 2
Pin 1 – Relay 1 COM (Power Failure Alarm)
Pin 2 – Relay 1 NO (Normal : Close , Alarm : Open)
Pin 3 – Relay 2 COM (Optic Fiber Failure Alarm)
Pin 4 – Relay 2 NO (Normal : Close , Alarm : Open)
123
456
LED Indicator
DIN-Rail Kit View
Rear Panel View Rear Panel View
Wall Mount Kit View