Cubby LUPIN User manual

CHILDREN’S HEALTHY
DESK & CHAIR
ASSEMBLY INSTRUCTIONS

B1 B3 B4 B5B2
B6 B7 B8

CAUTION!
1. For indoor use only.
2. This product should be placed on a flat surface.
3. Please immediately wipe clean the desktop surface if any liquid is splashed on it.
4. Please check screws regularly to ensure there are no loose parts during daily use.
5. Only tightly fasten all the screws once the desk and chair have been assembled properly.
6. Use a damp cloth to clean the desktop surface.
7. Don’t put product in the place where there is corrosive gas and moisture in case of damage.
A3x4
A1x12 A2x8 A7x1
A6x1
A4x4 A5x2

1 STEP
MODEL: LUPIN
A1x4
A2x4
A6
B1
B2
B3

ASSEMBLY INSTRUCTIONS
STEP 2
h
B4
h
A3x4

STEP
MODEL: LUPIN
B5
A
Bçê
Cçê
3

ASSEMBLY INSTRUCTIONS
STEP
A5x2
4

STEP
MODEL: LUPIN
5

ASSEMBLY INSTRUCTIONS
STEP
A6
B6
B7
A1x4
A2x4
6

STEP
MODEL: LUPIN
A4x4
A1x4
A6
B8
7

ASSEMBLY INSTRUCTIONS
STEP
A7
8

STEP
MODEL: LUPIN
9

ASSEMBLY INSTRUCTIONS
STEP
0°-35°
10

HEIGHT ADJUSTMENT
20.5-29.1 inch

HOW TO LIFT UP
The desk and chair can be adjusted higher by placing one foot on the support bar and pulling the desk
or chair up to the required height.
HOW TO LOWER DOWN
Gently pull up the desk or chair to the maximum height and then slowly lower down to the minimum
height. Lift up again to the required height as above.
11.8-17.3 inch