Cuckoo CBT-H1031W/WHULUS User manual

ELECTRONIC
TOILET SEAT
USER MANUAL
CBT-H1031W/WHULUS

Dear customers,
Thank you for purchasing Cuckoo Electronic Toilet Seat.
Please retain this manual for future reference. This manual will be of great
help should you have any questions or when the functions do not work
properly.
Product Benefits
Continuous Warm Water
Provides warm water continuously.
Multi Safety Apparatus
It is a safe product including accumulated technologies such as the Low Temp. Keep
Warm mode, the Earth Leakage Breaker, the Temp. Sensor, and Water Level Sensor
Easy Installation and Easy Cleaning
One-touch detachable structure makes installation, separation, and cleaning mich easier.
Electronic Toilet Seat for Kids
It has a Clean button for kids, so even children can safely use the product.
Extended Length of Nozzles
It has an extended length of nozzles, so you can have a broader range of options for
nozzle position for each body type.
Electronic Toilet Seat for Saving Electricity
Basic power saving mode and enhanced power saving mode saves electricity.
Clean Electronic Toilet Seat
It has a Nozzle Clean function (Auto and Manual) for keeping the product always safe.
Stainless Steel Nozzles
Its nozzles are made from stainless steel, so they do not easily accumulate pollutants,
thus being very hygienic.

Before Use
Important Safeguards / Cautions Before Installation
Warnings for Safe Use
Cautions for Safe Use
Name of Parts / Information on Components
4~5
6~7
8~9
10
During Use Checklist before Installation
How to Install the Product
Checklist after Installation
Checklist before Use/How to Use
How to Control and Use Functions
How to Clean the Product
How to Disassemble and Keep the Product/
How to Use Electronic Toilet Seat in Winter
11
12
13
14
15~18
19~20
21
Before Asking for
Support
Please check before asking for Support.
22
Service Guide Product Specifications
23
Table of Contents

imporTanT safeguards
CauTions beforeinsTallaTion
4
READ ALL INSTRUCTIONS BEFORE USING
DANGER : To reduce the risk of electric shock :
1. Do not place or store this appliance in a location where it can fall or be pulled into a tub or sink.
2. Do not place in, or drop into water or other liquids.
3. Do not touch a product that has fallen into water. Unplug immediately.
WARNING : To reduce the risk of burns, electric shock, fre or injury.
1. Close supervision is necessary when this appliance is used by or is near infants, elders, or
handicapped persons.
Children should not be permitted to use or touch this appliance without adult supervision.
Be sure to adjust the toilet seat's temperature for elders, handicapped persons, or people with
sensitive skin.
2. Use this appliance only for its intended purpose as described in this manual.
Do not use attachments not recommended by the manufacturer.
3. Do not operate this appliance if the cord is damaged or if the product is dropped into water.
4. Install the unit properly by following the installation procedure.
5. Only authorized persons can install or repair the unit. Do not attempt to service this appliance by
yourself. Doing so could void the warranty.
6. Keep the cord away from heated surfaces.
7. Never drop or insert any objects into any opening or hose.
8. Do not use outdoors. Do not use aerosol or oxygen spray products on the unit.
9. Always follow the grounding instructions in this manual before plugging in the unit.
SAVE THESE INSTRUCTIONS
NOTE THE FOLLOWING IMPORTANT POINTS
1. Do not install in a location where water might be splashed on this appliance or in a location
exposed to excessive moisture where condensation might form on the product's surface.
2. To avoid damage to electronic components due to high levels or humidity, provide adequate
ventilation by opening a window and/or door when bathing.
3. Water supply should have a water pressure of 0.1~0.74MPa(1~7.4bar).
4. Connect the product to a pipe carrying potable water. Do not connect to an industrial water line
or other water supplies that are not potable.
5. Cool the unit in the room before installation.
6. The thermal protector in the water tank may malfunction when transporting or storing warm water.
7. The rated power voltage is 120V AC, 60Hz.
8. Do not plug the unit in until installation is complete. It may result in malfunction.

CauTions beforeinsTallaTion
5
www.cuckoo.co.kr
WIRING REQUIREMENTS
1. Any other servicing should be performed by authorized service representatives.
2. GROUNDING INSTRUCTIONS
This product should be grounded. In the event of an electrical short circuit, grounding reduces
the risk of electric shock by providing an escape wire for the electric current. This product is
equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged
into an outlet that is properly installed and grounded.
DANGER : Improper use of the grounding plug can result in a risk of electric shock.
If the cord or plug is necessary to repair or needs to be replaced, do not connect the grounding
wire to a flat blade terminal. The grounding wire can be identified by its insulated outer surface.
It will either be colored green or will not contain yellow stripes.
Check with a qualified electrician or serviceman if you do not understand grounding instructions
or if you do not know whether the product is properly grounded.
3. This product is for use on a nominal 120V circuit. It has a grounding plug that looks like
the plug illustrated in sketch A.
A temporary adapter, which looks like the adapter illustrated in sketches B and C, may be used
to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is
not available. The temporary adapter should be used only until the properly grounded outlet
(sketch A) can be installed by a qualified electrician The green colored rigid ear lug and the like
extending from the adapter must be connected to a permanent ground such as a properly
grounded outlet box cover.
Whenever the adapter is used, it must be held in place by the screw.
4. If it is necessary to use an extension cord, use only a three wire extension cord that has a
three-blade grounding plug,
and a three-slot receptacle that will accept the plug on the product. Replace or repair a
damaged cord.
Grounding
pin
Grounded
outlet
(A)
Grounded
outlet box
Adapter
Metal
screw
Tab for
grounding screw
(B)
(C)

Warningsfor safe use
6
어린이나, 노약자 혼자 사용은 위험합니다.
보호자가 항상 지켜봐 주십시오.
•감전의 위험이 있습니다.
•신체 상해의 우려가 있습니다.
When cleaning the product, do not
use or spray a cleaning agent
(acidulant for a gas stove, toilet
cleaning agent for sink, a variety of
stain removers) or an air freshener for
deodorizing onto the exterior of the
Electronic Toilet Seat.
• If you use any of the above-mentioned cleaning agents or air refreshener, the
exterior of the product may be discolored or damaged, causing a problem in
safety of electricity.
Please use the product only with a
Power Outlet exclusively for 120V with
at least a rating of 15A and when
properly grounded. Do not plug multiple
devices into the same Power Outlet
simultaneously.
• If you use it with a lot of products, it may cause a fire or an
electric shock.
• Please check the power outlet regularly.
• If it is not properly grounded, it may cause electric shock due to short circuit.
• If there is a foreign substance or moisture on the Power Plug, wipe it
thoroughly before use.
This Product is not intended for use by
people (including children) who lack
physical or mental abilities, or lack
experience and knowledge to be able to
use the product safely without
supervision or instruction.
• Do not let children play with the device.
• It may cause electric shock or injury.
Do not block the hot air hole or put foreign substances such as
your hand or a metal stick into the product.
• It may cause burns or electric shock.
• It may cause a malfunction of the product.
If you use the product for a long time on the toilet seat
or the hot air dry mode, you may get a low-temperature
burn.
Particularly pay attention to the temperature when children, those
who cannot control the temperature on their own, or those with
weak skin use the product.
When putting in or pulling out the Power
Plug, first remove moisture on your
hands and then put in or pull out the
Power Plug by holding the Power Plug.
• If you do not do so, it may cause an electric
shock.
Never supply power to the product which is not installed on a
toilet and to which no water supply hose is connected.
• It may cause a fire or malfunction.
Do not bend, tie or pull the Power Cord by
force.
• It may cause an electric shock or fire.
Beware of low-temperature burns.
• If your skin comes in contact with the product for a long time even at a
relatively low temperature, your skin may get low-temperature burns.
• Children, the elderly and the infirm, and those with disabilities in physical
activities should use the product at low toilet seat temperatures, hot water
temperatures, and dry temperatures.
• After using the product at a high temperature, please lower the temperature
for those users who are the elderly and the infirm, children, and those with
weak skin.
Use the waterworks for the water supply.
Do not connect an industrial water supply or a heavy water
supply other than the waterworks to the product.
• It may cause a skin infection, skin disease, or bladder infection, and it may
cause a malfunction.
Warning Prohibited
Please comply with the ‘Warnings for Safe Use’ to ensure safe and proper use of the product and prevent accidents and
dangerous situations.
The ‘Warnings for Safe Use’ section consists of ‘Warning’ and ‘Caution’ items, which are defined as follows:
󱇫
󱇫
• This symbol indicates a potentially dangerous
situation under special circumstances that requires
your attention.
• Please read the details carefully and follow the
instructions to avoid dangerous situations.
• This symbol indicates to ‘prohibit’ a certain action.
• This symbol indicates to 'instruct' a certain action.
Potentially dangerous situation that can
cause serious injuries or death if not
avoided.
Potentially dangerous situation that can
cause minor injuries if not avoided.
Warning
Caution
Chlorine
Bleach
Toilet
Cleaning
Stain
Remover

Warningsfor safe use
7
www.cuckoo.co.kr
어린이나, 노약자 혼자 사용은 위험합니다.
보호자가 항상 지켜봐 주십시오.
•감전의 위험이 있습니다.
•신체 상해의 우려가 있습니다.
Do not disassemble, repair, or
remodel the product, and prevent
foreign substances from entering
into the product.
• It may cause a malfunction of the product.
• It may cause a fire, electric shock, or bodily
injury.
• Please contact our Customer Service Center for repair
of the product.
Do not put cigarettes or burning materials
near the product or put such materials
onto the product.
• It may cause a fire or malfunction of the product.
Do not sprinkle water onto the Main
Frame of the product or the Power Plug
or use the product in a humid place.
• It may cause a fire due to a short circuit.
It may cause a malfunction, and you may not
receive a service free of charge.
Stop using the product if the Power Cord
or the Power Plug is damaged or is
shaking, and contact our Customer
Service Center.
• If the sheath of the Power Cord is peeled off or
chopped during use due to negligence, it may
cause fire or electric shock. Thus, please check the
status of the Power Cord, Power Plug, and Power Outlet
frequently.
• To prevent dangerous situations arising from the damage of the Power Cord
or the Power Plug, please contact the manufacturer, distributor or certified
technician (servicemen) for replacement.
• We strongly recommend that the damaged parts be repaired at a designated
service center.
When disassembling the product from the
toilet, always first pull out the Power Plug
from the Power Outlet for safety.
• It may cause an electric shock or fire.
Warnings Prohibited
Do not put inflammables such as a stove for
heating the bathroom heater, or cigarettes
near the product.
• It may cause a fire, discoloration, or malfunction.
Do not insert power plugs of several
products in a single outlet at the same
time.
• If you put power plugs of various products such as
a ventilator in the bathroom or other electric products
in a single power outlet, it may cause heat generation,
ignition, or fire.
Do not pull or bend the Connection Pipe
Hose using excessive force.
• It may cause a water leak or suspension of
water supply.
Do not randomly connect or process the
Power Cord.
• It may cause an electric shock or fire.
When taking a shower or cleaning the
bathroom with water, always pull out
the Power Plug, and prevent water or
detergent or the like from being put on
the Main Frame of the product or the
Power Plug.
• It may cause an electric shock or fire.
• When water or other foreign substances are put into the
product, pull out the Power Plug, close the water supply valve, and then
contact our Customer Service Center.

CauTions for safe use
8
어린이나, 노약자 혼자 사용은 위험합
니다.
보호자가 항상 지켜봐 주십시오.
•감전의 위험이 있습니다.
•신체 상해의 우려가 있습니다.
If a strange noise, smell, or smoke
comes out from the product during
use, immediately pull out the Power
Plug, and contact our Customer
Service Center.
• If you continue to use the product with such
malfunction, it may cause a fire or electric shock.
Do not use the product for any other usage described in the
User Manual.
• It may cause a fire, electric shock, or bodily injury.
Install the product by avoiding the direct
sunlight.
• It may cause a discoloration on the exterior of
the product or a malfunction of the product.
Do not step on the toilet seat or the
toilet seat cover to go up or put
anything on the toilet seat or the toilet
seat cover. In particular, do not sit on
the toilet seat cover.
• Do not put your hand on or step on the toilet seat
cover, toilet seat, or the Main Frame to go up.
• It may cause damage or malfunction of the product.
• It may cause a bodily injury due to deformation or damage.
Prevent children from putting any
foreign substances or their hand into
the nozzle or the hot air outlet.
• It may cause burns.
• It may cause a fire or electric shock.
• It may cause a malfunction of the product.
Caution Prohibited
Hot Air Outlet
Never soak the product in water.
• It may cause a malfunction, electric shock, or fire.
Children may fall into the toilet through the
toilet seat, so adults should accompany
children to use the product.
• If you do not do so, it may cause a bodily injury.
Do not excessively lean on the toilet seat
cover.
• It may cause malfunction.
• It may cause a bodily injury due to deformation or
damage.
If you are going to not use the product
for a long time or to clean the product,
first pull out the Power Plug.
• If you do not do so, it may cause a fire.
When there is dust on the Power Plug,
wipe it off with a dry cloth.
Do not forcibly close the toilet seat or the
toilet seat cover.
• It may cause malfunction.
Do not press any button on the
Control Panel after putting the toilet
seat on the toilet by your hand or
other things without sitting on the
toilet seat.
• Water may come out from the nozzle, so your
clothes may get wet. In addition, you may get a
bodily injury or burns by hot water or hot air.
Control
Panel

CauTions for safe use
9
www.cuckoo.co.kr
어린이나, 노약자 혼자 사용은 위험
합니다.
보호자가 항상 지켜봐 주십시오.
•감전의 위험이 있습니다.
•신체 상해의 우려가 있습니다.
After installing the product, always
check if any water leaks from the
Water Supply Connection Unit.
• It may cause a fire or electric shock due to
water leak.
When cleaning the waterworks filter of
the Main Frame of the Electronic Toilet
Seat, first close the Water Supply
Valve, and disassemble the Water
Supply Hose for the Electronic Toilet
Seat.
After cleaning, when you try to re-
assemble the product, close it firmly to leave
no gap.
• It may cause a water leak.
Never connect the product to a hot
water pipe.
• It may cause a malfunction of the product
or a bodily injury. Always connect the
product to the cold water pipe.
Prevent urine from being spilled on the hot air outlet and the
nozzle parts.
• It may cause odor or malfunction of the product.
• When a nozzle is blocked by foreign substances such as urine, wipe it off
with a soft toothbrush which you do not use.
In a region with concern over freezing,
please provide heating, and prevent
the surrounding temperature from
going down to below zero.
• If the product is frozen, the pipes such as the
water supply pipe may be damaged, and water
leakage may be caused.
If there is concern over freezing, please take the water
out from the product.
Caution Prohibited
Do not use the product with any
disorder.
In the following cases, pull out
the Power Plug, and close the
Water Supply Valve.
- Water leaks from the pipe or the
Main Frame.
- There is a strange noise or odor.
- There is a crack or broken part on the
Main Frame.
- There is smoke coming out from the Main Frame.
• If you continue to use the product with any disorder, it may cause a fire,
electric shock, or water leak.
• Please contact our Customer Service Center for repair of the product.
Hot Water
Pipe

nameof parTs/ informaTion on ComponenTs
10
Names of Parts of Main Frame
Accessories
< Front >
< Back >
Control Panel
Bidet
Electronic Toilet Seat
Attach/Detach Button
Nozzle Hot Air Outlet
Power Cord
Soft Rear Nozzle
Rear Nozzle
Front Nozzle
Catch plate
installation plate
Toilet Seat
Body sensor
Toilet Seat Cover
Installation bracket Catch plate
User Manual
T-valve
Anchored screws
Anchored rubbers
Anchored washers
Anchored nuts
Bidet hose

CheCklisT beforeinsTallaTion
11
www.cuckoo.co.kr
Details to Check before Installation
Avoid direct sunlight and electric heating appliances.
▶They may cause fire or discoloration of the product.
Please check the size of your toilet.
▶For some imported toilets, the product may not be installable on
the toilet because of ill-fitting sizes.
Do not install where it may be exposed to moisture,
excessive dust, and splashing water.
▶It may cause a malfunction of the product.
Avoid a place where the temperature goes down below
32℉(0˚C).
▶ The product is intended to be used indoors. Installing it in a place
where the temperature goes down below 32℉(0˚C) may lead to a
malfunction of the product due to frozen filters or inside of the product.
When the Water Supply Valve of the toilet is a flush valve,
the Electronic Toilet Seat may not be installable.
Please check the matters before installation.
1
2
3
4
5
Precautions for Place of Installation
Please be careful when you move the product.
▶ Never move the product upside down.
▶ Before moving the product, be sure to unplug the power plug and
drain the water from the Electronic Toilet Seat.
Make sure to connect the water supply valve to the Cold
Water Pipe.
▶ Connecting the product to the hot water pipe may cause burns or
a malfunction of the product.
Cold
Flush Valve
Precautions in Moving the Product
Precautions on Connecting Pipes

hoW ToinsTall TheproduCT
12
• Please use the product only with a Power Outlet exclusively for 120V with at least a rating of
15A and when properly grounded
• Do not make connect Power before installation.
Installation Order
Separate water supply hose
▶ Turn the water supply valve clockwise to lock, and separate
the toilet hose using a spanner.
1
Remove the existing toilet seat
▶ Unfasten the nut and remove the toilet seat.
▶ Save the old toilet lid and nuts for reinstallation later.
2
Connect T-valve
▶Install T-valve as shown
3
1. Allign the catch plate groove with the toilet
seat hole.
2. Insert the Anchored screws into the catch
plate and toilet seat hole.
3. Fasten the catch plate to the toilet by
tightening the Anchored screws with
Anchored rubbers, Anchored washers and
Anchored nuts.
▶Only 140mm toilet mounting hole spacing is
available.
4
Connect the Water supply hose to the side of
Electronic Toilet Seat.
5
1. Insert the Electronic Toilet Seat body into
the groove on the installed catch plate.
2. Connect T-valve and Water supply hose.
6
Warnings
Water Supply Valve
Toilet hose
Thread from tank
Anchored screws
Anchored rubbers
Anchored washers
Anchored nuts
Catch plate
Catch plate
Installation Hole
Bidet Body
Anchored rubbers
Anchored washers
Anchored nuts
Electronic Toilet Seat body
anchored Hook
Toilet hose
Bidet hose
Water Supply Valve

CheCklisT afTer insTallaTion
13
www.cuckoo.co.kr
Checklist after Installation
※ After installing the product, please check the followings.
1
Nozzle
Packing
Sticker
Open the Water Supply Valve by turning it to the left, and check if water leaks from
the connection parts (①-⑤).
•Check if the T-Valve and the Main Frame Water Supply Hose are fastened in a straight line.
※Warnings
•If the Main Frame Water Supply Hose is excessively or loosely fastened, it may cause a water leak.
Remove the packing sticker from the Bidet Nozzle.
※You need to first remove the nozzle packing sticker from the center of
the Main Frame of the Electronic Toilet Seat to normally operate the
product.
2
Put the Power Plug in the Power Outlet.
•Connect the power supply, and press the power button if the temperature indicator does not light up.
※Warnings
•When power is supplied to the Main Frame, do not turn over or move the Main Frame. It may cause a malfunction.
3
The tank is filled with water automatically.
•When the water is full, you will hear a buzzing sound.
4
With your left hand in contact with the Seating Sensor Unit (with
the Seating Sensor Unit operating), press the Clean or the Bidet
button to check if the Nozzle works and water is sprayed. Here,
cover the Clean Nozzle part with your right hand to prevent the
water from splashing to the outside.
5
①
②
③
④
⑤
①
③ ④
②
⑤
Water Supply Valve

CheCklisT beforeuse / hoW Touse
14
Sit on the Toilet Seat
▶ Sit on the middle of the toilet
seat
Press the button
or
▶ Available to use Rear mode
▶ Available to use for 90 seconds
▶ If you press the button one more time, you can use
move mode.
Press the button (Stop)
▶ Rear mode will stop
Press the button
▶ Available to use for 3
minutes
▶ If you clean with the toilet
paper, it has excellent drying
effect.
2
Connect the power Supply and open the main water
Supply valve.
▶ This product exclusively uses an AC 120V/ 60Hz.
▶ Always put the Power Plug in a grounded Power Outlet exclusively for
AC 120V/60Hz.
▶ The bidet works normally only when the power is connected and water is
supplied.
Do not perch on an outer edge of the Toilet Seat, but always sit on the center.
▶ If you move your buttocks or cross your legs while using the product, the product may stop operation.
▶ If you install an auxiliary seat for infants on the Electronic Toilet Seat, the product will not work. (The Skin Sensor will fail to
detect.)"
When the water pressure on the Electronic Toilet Seat is low
▶If you use the Electronic Toilet Seat at the same time as you flush the toilet after relieving yourself, the water
pressure may decrease.
▶If your region has a low water pressure, the Electronic Toilet Seat may not work.(If the water pressure is 0.1 MPa
(1.0 bar) or lower, the Electronic Toilet Seat may not work.)
1
2
3
Checklist before Use
How to use
•Toilet Seat Sensor is installed inside of toilet seat. (Refer to ❺of 13 page “After installing the product, please check the
followings” Toilet Seat Sensor is activated if it is touched by skin of human. It will be unactivated If toilet seat is covered by
anything or unavailable to sense the skin of human.
1
3 4

hoW ToConTrol and use funCTions
15
www.cuckoo.co.kr
When you clean the Control Panel of the Electronic Toilet Seat, first pull out the Power Plug, use a soft cloth wet in
water, and do not use a dish sponge, benzene, thinner, or chlorine bleach or let them put on the product.
※It may cause a discoloration, crack, or damage to the Control Panel.
If you use the product for a long time on the toilet seat or the hot air dry mode, you may get a low-temperature burn.
•If any of the following mentioned persons intends to use the product, please control the Toilet Seat Temp. button to “OFF” or
“Level 2”.
Children, the elderly and the infirm, those with weak skin, those who cannot control the temperature on their own, those who have taken a
pill for accelerating sleeping (sleeping pills, cold medicine, or the like), those with hangover, those who are tired, etc. may get a low-
temperature burn or an accident.
•If you clean the product with a sharp brush or rough dish sponge, the product may get a scratch or damage.
•Do not perch on an outer edge of the Toilet Seat, but always sit on the center. (If you perch on an outer edge of the Toilet Seat, the Skin
Sensor may not work, leading to suspension of basic functions.)
•If the input water temperature is 57.2℉(14℃) or lower, the cleaning water temperature may be lower than the set temperature.
(Other functions operate properly)"
Use it when you want to wash your anus.
•When you use Rear, if you repress the Rear button,
the product operates the Move Rear function.
You can control the water pressure and
the hot air temperature from 1 to 5 levels.
You can adjust nozzle position while
you press the button.
Use this button to clean the nozzle.
•If you press the button shortly, It operates
auto mode and activates nozzle cleaning
automatically.
•If you press the button for 4 seconds, it
operates manual mode and nozzle comes
forward and stops for 2 minutes.
(If press the STOP button or after 2
minutes, nozzle goes in automatically)
This is for the Bidet function exclusively for
women.
•When you use the Front function, if you repress
the Front button, the product operates the Move
Front function.
If press this button, It operates Rear, Front, Air
Dry function without sitting on the toilet seat.
•CHILD function will be OFF automatically after 3
minutes.
If it is selected, the Strong/Weak Lamp is
turned on the Control Panel, and the Hot Air
Dry function works.
•If you wipe off water drops or the like by using a
tissue, etc. before drying, it dries faster.
•If you press the button, a straight, soft
water current for regular motions
massages your anus to induce regular
motions.
If you press the button, Energy Saver is activated or
deactivated.
•Basic Power Saving, Advanced Power Saving
If press this button, It operates Massage
function with high and low water
pressure automatically.
•It operates while rear mode is active. It
operates between level from 1 to 5 of water
pressure automatically. (Soft Rear - 3-5 level)
If you press the button, you can turn on or off
•ON (shortly) / OFF (more than 3 seconds.)
You can control the hot water
temperature from 1 to 5 levels .
•It normally indicates water temperature.
Press the button to adjust the toilet seat
temperature from 1 to 5 levels.
•If you press the button, Indicator flashes 3 times
and then indicates seat temperature level for 2
sconds. When you press the button at this time,
you can adjust the seat temperature level.
•If there is no input for 5 seconds in the seat
temperature setting mode, It changes to toilet
seat temperature indicator.

hoW ToConTrol and use funCTions
16
Air Dry Temp. Function
•Dry Temperature can be adjusted.
It starts with level 3 at the first time you use. After that, the level you used before is remain.
•You can adjust dry temperature with the button (+) or (-) while Rear mode is active.
Water Temp. Function
•Press the Water Temp. button to adjust the water temperature.
If you press the button, the indicator will be changed. Set the temperature as you wish.
Seat Temp. Function
•Press the Seat Temp. button to adjust the seat temperature.
If you press the button, the indicator will be changed. Set the temperature as you wish.
※Water Temperature and Seat Temperature starts from level 1 (Heater Off) at the first time you use.
Moving Function
• If you re-press the button while Rear or Front mode are active, the nozzle moves forward and backward.
• If you re-press the Rear or Front button, Nozzle stops.
Soft Rear Function
•The function that helps constipation with soft and powerful water stream
Water Pressure Function
•You can adjust water pressure with the button (+) or (-) while Rear mode is active.
•It starts with level 3 at the first time you use. After that, the level you used before is remain
Nozzle Position Function
• The nozzle position can be adjusted when you press the button or while Rear or Front mode are active.
• The nozzle position returns to the initial center position when you stand up after using the bidet.

hoW ToConTrol and use funCTions
17
www.cuckoo.co.kr
•Clean water comes out from the nozzle to clean nozzle before and after using Rear or Front mode.
•You can use Rear, Front, Air Dry function without sitting on the toilet seat.
•The position of nozzle comes forwards to the end and It operates for 40 seconds.
•Setting of Water and Seat Temp. can be adjusted from level 1 to level 4
•Water pressure level starts with level 3 and you can adjust water pressure between level 1~3.
•Dry operates for 2 minutes and you can adjust temperature between level 1 ~4.
•You can use Massage function while Rear mode is active.
•Child mode operates for 3 minutes, and then it automatically returns to the mode before using
the Child function.
•This function is for children.
Child function
Self-Cleaning
•If you press the button, you can choose Basic Power Saving and Advanced Power Saving
Energy Saver
Basic Power Saving
•Press the button to turn on the green lamp.
•If the Basic Power Saving function is selected, Water and Seat Temp.
will remain for 30 minutes as you adjusted.
•Water temperature will be OFF after 30 minutes. Seat Temp.
will remain 30 degrees for 24 hours and after that (24hours), it will be OFF.
•If you sit on the toilet seat to use the Electronic Toilet Seat, Basic Power Saving function
will be Off temporarily and It will be turned on when you stand up from the toilet seat.
•If you want to release Basic Power Saving function, press the button to turn off.
Advanced Power Saving
•Press the button twice to turn on the red lamp( ).
Water and Seat temperature will be OFF.
•If you sit on the toilet seat to use the Electronic Toilet Seat, Basic Power Saving function will be
Off temporarily and It will be turned on when you stand up from the toilet seat.
• If you want to release Advanced Power Saving function, press the button to turn off.

hoW ToConTrol and use funCTions
18
Preventing low temperature burns function
• If you sit on the toilet seat with Seat Temp. level 5, seat temperature goes down to
prevent low temperature burns.
• It returns to setting value when you reset or stand up.
Nozzle Cleaning
(1)Auto Nozzle Cleaning
• If you press the button shortly without sitting on the toilet seat, It operates auto
mode and activates nozzle cleaning automatically.
(2)Manual Nozzle Cleaning
• If you press the button for 3 seconds without sitting on the toilet seat, It operates
manual mode and nozzle comes forward and stops for 2 minutes.
(If press the STOP button or after 2 minutes, nozzle goes in automatically)
Power ON/OFF
• If you press the Power button for 3 seconds, product power turns off.
• If you press the Power button shortly during power off mode, it turns on.

hoW ToClean TheproduCT
19
www.cuckoo.co.kr
•Do not spray water towards the nozzle and dry air vent. Water may get inside and
cause an electric shock or malfunction.
Caution
Nozzle Cleaning
1
Auto Nozzle Cleaning
• Press the "Nozzle Cleaning" button briefly while not seated. In auto mode, water is drained through the drain
hose with a beep sound and the nozzle moves.
2
Manual Nozzle Cleaning
① Press the "Nozzle Cleaning" button for 3 seconds while not seated. In manual mode, the nozzle comes out with
a beep sound.
② Clean the nozzle with an unused toothbrush, etc.
③ Press the "Stop" button. The nozzle goes in and self-clean.
• When seated, the nozzle will return.
• The nozzle will return automatically after 2 minutes.

hoW ToClean TheproduCT
20
•The Electronic Toilet Seat is made of plastic and can be damaged by scrubbers and chemicals.
Do not use thinner, benzene, or toilet cleaners to clean the bidet.
•The Electronic Toilet Seat can be cleaned with water, but do not spray water on the power plug.
(It causes electric shock.)
•When cleaning the product, disconnect the power plug from the outlet and prevent water from
splashing on the power plug and outlet.
•Touching the power outlet with wet hands may cause an electric shock.
Sandpaper
Bleacher
Benzene
Thinner
Pesticide
Exterior cleaning method