Cuckooland Ava MG 7827 User manual

Ava High Sleeper
Assembly Instructions

Page : 1 of 28
Model : MG 7827
Product Size : 920mm x 1930mm (Base Int Size)
Thank you for purchasing this product. Before starting assembly we suggest you spend a short time reading
through this leaftlet, then follow the simple step by step guide.Two people are needed to assemble this product.
1966mm
[77.40"]
1893mm
[74.52"]
1380mm
[54.33"]
www.cuckooland.com | [phone]

Model : MG 7827
Product Size : 920mm x 1930mm (Base Int Size)
Page : 2 of 28
TOP TIPS BEFORE YOU START !
1. Please check that all parts & hardware are present before you start the assembly of your furniture.
2. For ease and speed of assembly, we recommend that before you commence each step of the assembly,
3. We recommend that where possible, all items are assembled near to the area in which they will be placed in use,
4. For the protection of your furniture, particularly items of high gloss finish, we recommend that the product is placed on a
5. During assembly please take care not to over-tighten any fittings, as this may damage the product.
CARE AND MAINTENANCE OF YOUR FURNITURE
Please periodically check all fittings and re-tighten as necessary.
To clean your item, please use a damp cloth and wipe clean.
Never allow any kind of liquid to remain on your furniture. Absorption can cause wood to warp or finishes to de-laminate.
Please do not place hot items (e.g hot drinks) directly on the wood surface.
Please do not drag or pull your furniture.
IMPORTANT INFORMATION
1. Thickness of mattress should not exceed 184mm.
2. Children should be discouraged from playing on top of this bunk bed.
3. The bunk bed should be checked periodically by the owner to ensure that the guardrail, ladder, and other components
4. A bunk bed is not to be placed near a ceiling fan unless the distance between the closest points on the ceiling fan bunk
5. Use guardrails on both sides of upper bunk.
6. Prohibit horseplay on or under bed(s).
7. Prohibit more than one person on upper bunk.
8. Use Ladder for entering and leaving upper bunk.
9. If the bunk bed will be placed next to the wall, the guardrail that runs the full length of the bed should be placed against
STRANGULATION HAZARD:
19. Never attach or hang items to any part of the bunk bed that are not designed for use with the bed for example, but not
Bed is at lest 2 metres.
are maintained in the correct position and state of repair and that all connectors are tight.
The wall to prevent entrapment between the bed and the wall.
Please identify all the parts required for that step.
to avoid moving the product unnecessarily once assembled.
Protected surface during assembly to prevent any damage.
limited to hook, belt and jump ropes.
IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE
10. WARNING Do not use the bunk bed/high bed if any struclural part is broken or missing.
11. Ventilation of the room is necessary in order to keep the humidity low and to prevent mould in and around the bed.
12. WARNING "high beds & the upper bed of bunk beds are not suitable for children under six years due to risk of injury from falls";
13. WARNING "children can become trapped between the bed & the wall, a roof pitch, the ceiling, adjoining pieces of furniture (e.g.cupboard)
and the like. To avoid risk of serious injury the distance between the top safety barrier and the adjoining structure shall not exceed 75mm
nor shall be more than 230mm"
14. always follow the manufacturer's instruction;
15. Recommended Mattress Size : 90cm x 190cm (UK Single) with Maximum Depth of 18.4cm
16. This item conforms to European Safety Standards - BS EN 747-1 : 2012 + A1 : 2015 & BS EN 747-2 : 2012 + A1 : 2015
17. WARNING "Bunk beds and high beds can present a serious risk of injury from strangulation if not used correctly. Never attach or hang
items to any part of the bunk bed that are not designed to be used with the bed, for example, but not limited to ropes, strings, cords,
hooks, belts and bags"
18. High beds and the upper bed of bunk beds is suitable for a maximum mattress thickness of 184mm. The top of mattress must not come
above the line marked on the bed.
www.cuckooland.com | [phone]

Guide To Assembly
Model : MG 7827
Tools Required For Assembly
Rubber Hammer
DO NOT USE POWER TOOLS TO
ASSEMBLE THIS PRODUCT. USE
OF POWER TOOLS WILL INVALIDATE
ANY CLAIM AND MAY DAMAGE THIS
PRODUCT MAKING IT UNSAFE.
Phillips Screw Driver
Tape Measure

€2 People Required
Approximately 3 hour
Page : 3 of 28
€
www.cuckooland.com | [phone]

Part List
Model : MG 7827
Page : 4 of 28
No. Pcs No. Part Name
Carton 3 of 4
Pcs
Part Name
Carton 1 of 4
Carton 2 of 4
Assembly Instructions + Fitting List
2
02
04
1Top Panel
01 1
Back Side Panel
1
07
08
1
Left End Panel (Back)
1
09
2
1Left End Panel (Front)
Right & Left Panel (Center)
Support Panel
Right End Panel (Back)
1
05
Back Panel (Shelf)
03
06
Left Lower Panel
10 Right Lower Panel 1
40
41
13
12
11
2
10
1
1
1Right Ladder Panel
Left Ladder Panel
1st Step Panel (Ladder)
Ladder Support Rail
Metal Side Rail
LVL Slats 15
14
16
1
1
3rd Step Panel (Ladder)
1
15
2nd Step Panel (Ladder)
4th Step Panel (Ladder)
17 15th Step Panel (Ladder)
18
20
19
21
22
24
23
25
26
28
27
29
30
32
31
33
35
34
36
Right Panel (Open Shelf)
Shelf Panel (Open Shelf) 2
1
Center Panel (Open Shelf) 1
Top Panel (Open Shelf)
Back Panel (Open Shelf)
Support Panel (Desk)
Bottom Support Panel (Desk)
Center Support Panel (Desk)
Front Panel (Desk)
Top Panel (Desk)
Center Panel (Wardrobe)
Bottom Panel (Wardrobe)
Shelf Panel (Wardrobe) 3
Left Panel (Wardrobe)
Back Support Panel (Wardrobe)
Right Panel (Wardrobe)
Back Panel (Wardrobe)
Top Panel (Wardrobe)
Sliding Door (Wardrobe)
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
37 Front Side Panel 1
42
39
38
1
1
1Shelf Panel
Left Center Panel
Hanging Rail (417mm)
Carton 4 of 4
www.cuckooland.com | [phone]

Part List
Model : MG 7827
Page : 5 of 28
LVL Slats x15
27
26
25
24
09
07
06
39
08
07
05
03
03
04
02
01 35
33
28
31
21
22
19
19
20
18
23 36
30
30
30
37
38
11
12
17
16
15
14
13
10
33
34
29
40 x2
42
41 x10
www.cuckooland.com | [phone]

Fitting List
ACam Stud (small) 80
Cam 80
Fitting List
Model : MG 7827
B
D
F
C
H
L
M
N
P
Q
M6 JCN Nut
R
M6 x 30mm Allen Bolt 33
E
Page : 6 of 28
S
T
G
8
2
M6 Allen Wrench
K
M6 x 35mm Allen Bolt 30
M8 x 25mm Wood Dowel 113
45mm Chipboard Screw 14
14mm Chipboard Screw 12
Carton 1 of 4
No. Part Name Pcs
M6 x 50mm Allen Bolt 13
J
M6 x 25mm Allen Bolt 5
U
V
PVC Roller Brown 2 sets
M6 Round Nut 6
7
Felt Pads (45 x 14mm)
Round Sticker 25mm
M6 x 13mm Baller
PVC Hanging Hook 2
M5 x 40mm JCBCW Screw 2
128mm Leather Handle
18mm Handle Screw
1
2
28
2+2
Round Sticker 25mm 16+2
Caution
There are many small components
used in the construction of this
unit.These loose items should be
kept away from young children
whilst assembling your unit. As
an extra precaution, screw cover
caps should be permanently
fixed in position.(Where applicable)
USEFUL HINTS & TIPS
Two people will be required to
assemble this unit
Please keep this assembly
instruction for future reference
6/8 L Bracket
PVC Back Support
22mm Chipboard Screw
W
X
Y
1
4
4
www.cuckooland.com | [phone]

01
Guide To Assembly
Model : MG 7827
Page : 7 of 28

WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING BOLT
TURN CLOCKWISE UNTIL SECURE
WRONG
CORRECT

B x 31
C x 34
A x 23
C
A
07
07
02
01
04
10
39
08
06
09
05
U x 6
U
U
U
U
U
U
www.cuckooland.com | [phone]

02
Guide To Assembly
Model : MG 7827
Page : 8 of 28
03
02
03
04
01
x 3
03
D x 4
D
D
D
D
D x 7
D
DD
D
DD
D
04
02
www.cuckooland.com | [phone]

05
Guide To Assembly
Model : MG 7827
Page : 9 of 28
U x 4
A x 10
06
A
U
06
05
U
U
U
A
AA
A
A
A
A
A
A
06
05
x 8
www.cuckooland.com | [phone]

07
Guide To Assembly
Model : MG 7827
Page : 10 of 28
R x 3
N x 5
07
09
01
40
39*
06
N
N
N
N
N
R
R
08 x 12
08
R
www.cuckooland.com | [phone]

09
Guide To Assembly
Model : MG 7827
Page : 11 of 28
07
08
10
10
x 2
V
V
V
V
V
V
V
V
V x 8
05
www.cuckooland.com | [phone]

11
Guide To Assembly
Model : MG 7827
Page : 12 of 28

WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING BOLT
TURN CLOCKWISE UNTIL SECURE
WRONG
CORRECT

B x 19
C x 32
A x 11
C
A
23
25
21
20
26
22
27
18
19 x2
24
U x 2
U
U
www.cuckooland.com | [phone]

12
Guide To Assembly
Model : MG 7827
Page : 13 of 28
22 21
19
13
18
1514 A x 2
A
18
x 2
23
24
x 4
19
18
20
D
D x 3
D
D
A
20
21
x 2
www.cuckooland.com | [phone]

16
Guide To Assembly
Model : MG 7827
Page : 14 of 28
24
24
U x 6
U
23
22
21
x 4
06
18
20 U
U
U
U
U
17
www.cuckooland.com | [phone]

18
Guide To Assembly
Model : MG 7827
Page : 15 of 28
26
x 2
19 H x 2
H
09
M x 2 M
M
H
25
25
23
26
www.cuckooland.com | [phone]

20
Guide To Assembly
Model : MG 7827
Page : 16 of 28
x 3
27
21
26
26
25
27
P x 3
P
P
39
x 2
P
09
www.cuckooland.com | [phone]

22
Guide To Assembly
Model : MG 7827
Page : 17 of 28
31
29

WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING BOLT
TURN CLOCKWISE UNTIL SECURE
WRONG
CORRECT

35
28
33
30 x3
32
A
B x 18
C x 28
A x 15
C
S x 2
S
www.cuckooland.com | [phone]

23
Guide To Assembly
Model : MG 7827
Page : 18 of 28
32
25 A x 3
A
x 3
24
26
30
30
30
A
A
x 3
28
F x 2
F
F
x 1
29
33
www.cuckooland.com | [phone]

27
Guide To Assembly
Model : MG 7827
Page : 19 of 28
34
29 U x 6
28
30
35
x 6
U
31
31
U
U
U
33
x 5
U
U
29
www.cuckooland.com | [phone]