Page : 2 of 38
Model : Bailey Kids Cabin Bed with Pull Out Desk
www.cuckooland.com / +44 (0)1305 231231
TOP TIPS BEFORE YOU START !
1. Please check that all parts & hardware are present before you start the assembly of your furniture.
2. For ease and speed of assembly, we recommend that before you commence each step of the assembly,
3. We recommend that where possible, all items are assembled near to the area in which they will be placed in use,
4. For the protection of your furniture, particularly items of high gloss finish, we recommend that the product is placed on a
5. During assembly please take care not to overtighten any fittings, as this may damage the product.
CARE AND MAINTENANCE OF YOUR FURNITURE
Please periodically check all fittings and re-tighten as necessary.
To clean your item, please use a damp cloth and wipe clean.
Never allow any kind of liquid to remain on your furniture. Absorption can cause wood to warp or finishes to de-laminate.
Please do not place hot items (e.g hot drinks) directly on the wood surface.
Please do not drag or pull your furniture.
IMPORTANT INFORMATION
1. The thickness of the mattress should not exceed 184mm.
2. Children should be discouraged from playing on top of this bunk bed.
3. The bunk bed should be checked periodically by the owner to ensure that the guardrail, ladder, and other components
4. A bunk bed should not to be placed near a ceiling fan unless the distance between the closest points on the ceiling fan bunk
5. Please use guardrails on both sides of the upper bunk.
6. Please prohibit reckless play on or under bed(s).
7. Please prohibit more than one person from using upper bunk.
8. Please use ladder for entering and leaving upper bunk.
9. If the bunk bed is placed next to the wall, the guardrail that runs the full length of the bed should be placed against
STRANGULATION HAZARD:
bed is at least 2 metres.
are in the correct position and state of repair and that all connectors are tight.
the wall to prevent parts of the body from being trapped between the bed and the wall.
you identify all the parts required for that step.
to avoid moving the product unnecessarily once assembled.
soft, smooth surface during assembly to prevent any damage.
IMPORTANT - READ CAREFULLY & RETAIN FOR FUTURE REFERENCE
14. WARNING: Do not use the bunk bed/high bed if any structural part is broken or missing.
15. WARNING: High beds & upper bed of bunk beds are not suitable for children under six years due to risk of injury from falls.
11. Always follow manufacturer's instructions.
12. Recommended Mattress Size is 90cm x 190cm (UK Single) with Maximum Depth of 18.4cm.
17. This item conforms to European Safety Standards - BS EN 747-1 : 2012 + A1 : 2015 & BS EN 747-2 : 2012 + A1 : 2015
18. WARNING: Bunk beds and high beds can present a serious risk of injury from strangulation if not used correctly. Never attach or hang
items to any part of bunk bed that not designed to be used with the bed, for example: ropes, strings, cords, hooks, belts and bags but not
limited to these types of items.
above the line marked on the bed.
10. Ventilation of the room is necessary in order to keep humidity low and to prevent mould in and around the bed.
13. High beds and the upper bed of bunk beds is suitable for a maximum mattress thickness of 18.4cm. The top of mattress must not sit
16. WARNING: Children can become trapped between bed & wall, a roof pitch, ceiling, adjoining pieces of furniture
(e.g.cupboard). To avoid risk of serious injury distance between top safety barrier and adjoining structure should not
exceed 75mm nor shall be more than 230mm.